Multipart Build Effects on Temperature and Residual Stress by Laser Beam Powder Bed Fusion Additive Manufacturing
Source abstract
Abstract
Laser beam powder bed fusion (PBF-LB) is a leading technique among metal additive manufacturing (AM), and it has a wide range of applications in aerospace and medical devices. Most of the existing PBF-LB process modeling is mainly based on the fabrication of a single part on a large build plate, which is not reflective of the practical multipart PBF-LB manufacturing. The effects of batch size on the thermal and mechanical behavior of additively manufactured parts have not been investigated. In this work, the multipart PBF-LB thermomechanical modeling framework was proposed for the first time. The effects of sample numbers (1, 2, and 4) on temperature and residual stress (RS) of part-scale components were computationally investigated. It is found that RS within the parts decreased with increasing number of components per build. Parts located at the central areas of the build plate had larger RS than at the border. These findings can be beneficial for informing AM designers and operators of the optimum printing setup to minimize RS of metal parts in PBF-LB.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering, School of Engineering, College of Science and Engineering, NUI Galway, Galway, Ireland.
I-Form, SFI Research Centre for Advanced Manufacturing, Ireland.
Ryan Institute for Environmental, Marine and Energy Research, NUI Galway, Galway, Ireland.
References (55)
Show source-provided references
1. 10.1016/j.powtec.2017.12.05810.1016/j.powtec.2017.12.058 ↗
2. 10.1007/s40964-017-0029-810.1007/s40964-017-0029-8 ↗
3. 10.1016/j.addma.2018.09.02610.1016/j.addma.2018.09.026 ↗
4. 10.1016/j.addma.2016.05.00710.1016/j.addma.2016.05.007 ↗
5. Pant P, , Proper S, , Luzin V, et al. Mapping of residual stresses in as-built Inconel 718 fabricated by laser powder bed fusion: A neutron diffraction study of build orientation influence on residual stresses. Addit Manuf, 2020; 36:101501.
6. 10.1016/j.addma.2019.03.03410.1016/j.addma.2019.03.034 ↗
7. 10.1016/j.addma.2016.08.00310.1016/j.addma.2016.08.003 ↗
8. Williams RJ, , Piglione A, , Rønneberg T, et al. In situ thermography for laser powder bed fusion: Effects of layer temperature on porosity, microstructure and mechanical properties. Addit Manuf, 2019; 30:100880.
9. 10.1007/s12289-020-01560-110.1007/s12289-020-01560-1 ↗
10. 10.1108/RPJ-12-2015-019210.1108/RPJ-12-2015-0192 ↗
11. Mohr G, , Altenburg SJ, , Hilgenberg K. Effects of inter layer time and build height on resulting properties of 316L stainless steel processed by laser powder bed fusion. Addit Manuf, 2020; 32:101080.
12. 10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
13. 10.1016/j.ijfatigue.2017.01.00110.1016/j.ijfatigue.2017.01.001 ↗
14. 10.3390/app923511510.3390/app9235115 ↗
15. 10.1016/j.jmatprotec.2014.07.03010.1016/j.jmatprotec.2014.07.030 ↗
16. 10.1016/j.msea.2015.07.05610.1016/j.msea.2015.07.056 ↗
17. 10.1007/s11661-017-4164-010.1007/s11661-017-4164-0 ↗
18. 10.1108/RPJ-03-2019-006710.1108/RPJ-03-2019-0067 ↗
19. 10.1016/j.matlet.2018.08.03710.1016/j.matlet.2018.08.037 ↗
20. 10.1007/s00170-017-1303-010.1007/s00170-017-1303-0 ↗
21. 10.1016/j.addma.2018.07.00110.1016/j.addma.2018.07.001 ↗
22. Fitzgerald E, , Everhart W. The effect of location on the structure and mechanical properties of selective laser melted 316 L stainless steel. Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium. 2016; 574–583.
23. 10.1016/j.addma.2018.05.03810.1016/j.addma.2018.05.038 ↗
24. 10.1016/j.crme.2018.08.00810.1016/j.crme.2018.08.008 ↗
25. 10.1007/s40192-019-00144-510.1007/s40192-019-00144-5 ↗
26. 10.1016/j.cirp.2018.04.10510.1016/j.cirp.2018.04.105 ↗
27. 10.1016/j.cma.2017.12.00310.1016/j.cma.2017.12.003 ↗
28. 10.1016/j.addma.2015.03.00310.1016/j.addma.2015.03.003 ↗
29. 10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
30. Ramos D, , Belblidia F, , Sienz J. New scanning strategy to reduce warpage in additive manufacturing. Addit Manuf, 2019; 28:554–564.
31. Zhang W, , Tong M, , Harrison NM. Scanning strategies effect on temperature, residual stress and deformation by multi-laser beam powder bed fusion manufacturing. Addit Manuf, 2020; 36:101507.
32. Zhang W, , Tong M, , Harrison NM. Resolution, energy and time dependency on layer scaling in finite element modelling of laser beam powder bed fusion additive manufacturing. Addit Manuf, 2019; 28:610–620.
33. 10.1016/j.dib.2019.10455910.1016/j.dib.2019.104559 ↗
34. 10.1016/j.jmatprotec.2019.11655510.1016/j.jmatprotec.2019.116555 ↗
35. 10.1016/j.actamat.2017.09.05110.1016/j.actamat.2017.09.051 ↗
36. 10.1016/j.addma.2021.10200310.1016/j.addma.2021.102003 ↗
37. 10.1016/j.addma.2019.05.01510.1016/j.addma.2019.05.015 ↗
38. 10.1016/j.addma.2020.10182710.1016/j.addma.2020.101827 ↗
39. 10.1016/j.ijheatmasstransfer.2019.05.01710.1016/j.ijheatmasstransfer.2019.05.017 ↗
40. 10.1016/j.procir.2016.02.05810.1016/j.procir.2016.02.058 ↗
41. 10.1007/s12666-019-01785-y10.1007/s12666-019-01785-y ↗
42. 10.1016/j.jmatprotec.2015.10.02210.1016/j.jmatprotec.2015.10.022 ↗
43. 10.1016/j.addma.2016.10.00510.1016/j.addma.2016.10.005 ↗
44. 10.1016/j.ijmachtools.2017.04.00710.1016/j.ijmachtools.2017.04.007 ↗
45. 10.1016/j.actamat.2016.02.01410.1016/j.actamat.2016.02.014 ↗
46. 10.1016/j.ijheatmasstransfer.2016.08.10710.1016/j.ijheatmasstransfer.2016.08.107 ↗
47. 10.1016/j.matdes.2016.11.07810.1016/j.matdes.2016.11.078 ↗
48. 10.1016/j.msea.2017.11.10310.1016/j.msea.2017.11.103 ↗
49. 10.1016/j.pnsc.2016.12.00610.1016/j.pnsc.2016.12.006 ↗
50. 10.1126/science.abd158710.1126/science.abd1587 ↗
51. 10.1016/j.promfg.2018.07.11010.1016/j.promfg.2018.07.110 ↗
52. 10.3390/ma1206093010.3390/ma12060930 ↗
53. 10.1007/s00170-018-1699-110.1007/s00170-018-1699-1 ↗
54. 10.1016/j.addma.2018.02.00310.1016/j.addma.2018.02.003 ↗
55. 10.1016/j.msea.2017.04.03310.1016/j.msea.2017.04.033 ↗