journal article·2025-08-01Open access

Design and Implementation of a Novel Fiber Deposition System to Enable Laser Sintering of Chopped Fiber Reinforced Polymers

Hellen De Coninck, Sam Buls, Yannis Kinds, Arnout Dejans, Jeroen Soete, Sebastian Meyers, Brecht Van Hooreweder

Abstract

In this research, the design and implementation of a novel chopped fiber deposition system for the laser sintering (LS) process is discussed. The system allows deposition of chopped fibers with different lengths and of multiple fiber types in a commercial LS machine. A weight percentage of 5% (2 vol%) glass fibers can be implemented without disturbing the LS process. LS specimens both with and without fibers can be produced during the same job as the setup only deposits fibers on half the powder bed. This is to reach an in-depth understanding of the influence of fibers on the produced specimens as the comparison can be made with the matrix material built in the same job. The setup was developed to answer the increasing demand for additively manufactured polymer composites with optimized mechanical properties currently manifesting in industries such as aerospace, biomedical, and automotive. To reach successful stress transfer from fiber to polymer, fibers need to have a certain critical length dependent on the combination of fiber and matrix material. For most material combinations, this length is longer than what is obtained with the fillers reported in literature. The development of the deposition system successfully allows the deposition of chopped fibers with longer lengths (to reach successful stress transfer) during the LS process, overcoming previously reported difficulties. The setup consists of six main components and can be connected to the recoating roller or blade present in every LS machine. With a test sieve, the vibrating system and a four-blade mixer are the most important for the functioning of the system. After preliminary testing, a profound optimization of the setup was conducted after which LS specimens with chopped fibers were successfully produced. X-ray computed tomography imaging of the produced specimens with fibers, showed a successful integration of chopped fibers in different random directions throughout the layers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Manufacturing Processes and Systems, Department of Mechanical Engineering, KU Leuven, Leuven, Belgium.

Structural Composites and Alloys, Integrity and Nondestructive Testing, Department of Materials Engineering, KU Leuven, Leuven, Belgium.

References (36)

Show source-provided references
1. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
2. 10.1108/0144515031069865210.1108/01445150310698652 ↗
3. 10.1016/j.polymertesting.2013.04.01410.1016/j.polymertesting.2013.04.014 ↗
4. 10.1016/j.addma.2017.01.00310.1016/j.addma.2017.01.003 ↗
5. 10.1557/jmr.2014.13810.1557/jmr.2014.138 ↗
6. Kozior T. Rheological properties of polyamide PA 2200 in SLS technology. Teh Vjesn, 2020; 27(4):1092–1100; doi: 10.17559/TV-20190225122204
7. 10.1089/3dp.2019.003610.1089/3dp.2019.0036 ↗
8. Kruth J Levy G Schindel R et al. Consolidation of polymer powders by selective laser sintering. In: Proceedings of the 3rd International Conference on Polymers and Moulds Innovations; 2008; pp. 15–30.
9. De Coninck H, , Meyers S, , Van Puyvelde P, et al. On the difference in mechanical behavior of glass bead-filled polyamide 12 specimens produced by laser sintering and injection molding. 3D Print Addit Manuf, 2022; 1–21; doi: 10.1089/3dp.2022.0160
10. Kozior T. Assessment of mechanical properties of pa 3200 gf polyamide models made by SLS. Czas Tech, 2018; 11:181–186; doi: 10.4467/2353737xct.18.173.9429
11. 10.1002/admt.20180027110.1002/admt.201800271 ↗
12. Forderhase P, , Mc Alea K, , Booth R. The development of an SLS composite material. Solid Free Fabr Proc, 1995;(1):S287–S297.
13. 10.1063/1.501679110.1063/1.5016791 ↗
14. 10.1016/j.polymertesting.2019.10631310.1016/j.polymertesting.2019.106313 ↗
15. 10.3390/inventions801001010.3390/inventions8010010 ↗
16. 10.1063/1.508825810.1063/1.5088258 ↗
17. 10.1016/j.addma.2022.10319510.1016/j.addma.2022.103195 ↗
18. 10.1007/s40032-022-00873-110.1007/s40032-022-00873-1 ↗
19. 10.1016/j.pmatsci.2011.04.00110.1016/j.pmatsci.2011.04.001 ↗
20. 10.1016/j.phpro.2014.08.15710.1016/j.phpro.2014.08.157 ↗
21. 10.1016/j.powtec.2015.08.00410.1016/j.powtec.2015.08.004 ↗
22. 10.1016/j.matdes.2017.06.01310.1016/j.matdes.2017.06.013 ↗
23. Callister Jr WD Rethwisch DG. Materials Science and Engineering: An Introduction. 10th edition. Wiley: Hoboken NJ;. 2018.
24. 10.1002/pc.2022610.1002/pc.20226 ↗
25. Newell J. Essentials of Modern Materials Science and Engineering. John Wiley & Sons Inc.: Hoboken NJ; 2009.
26. Morita KI. Carbon Fibers. Springer: Dordrecht;, 1984; doi: 10.2115/fiber.40.4-5_P344
27. Loewenstein KL. Manufacturing Technology of Continuous Glass Fibres. Elsevier: Amsterdam;, 1973; doi: 10.1016/0010-4361(74)90368-1
28. 10.1016/j.compositesa.2019.10561910.1016/j.compositesa.2019.105619 ↗
29. 10.1016/j.compositesa.2021.10638910.1016/j.compositesa.2021.106389 ↗
30. 10.1016/j.polymertesting.2016.11.03210.1016/j.polymertesting.2016.11.032 ↗
31. Schmid M. Laser Sintering with Plastics. Hanser Publications: Cincinnati;, 2018; doi: 10.3139/9781569906842.fm
32. De Coninck H Meyers S Buls S et al. Towards enabling inter and intra layer chopped glass fibre deposition during the laser sintering process. In: European Conference on Spacecraft Structures Materials and Environmental Testing Proceedings. 2023; pp. 100–108.
33. 10.1108/1355254971019183610.1108/13552549710191836 ↗
34. 10.1243/09544054JEM53710.1243/09544054JEM537 ↗
35. 10.1016/S0890-6955(02)00070-610.1016/S0890-6955(02)00070-6 ↗
36. Evolution Composites. Volume-weight fraction calculator. n.d. Available from: https://compositesevolution.com/resources/volume-weight-fraction-calculator/ [Last accessed: November9 2023].