journal article·2019-07-10Open access

Size-Controlled Transparent Jute Fiber for Replacing Transparent Wood in Industry Production Area

Tianshi Feng, Jiankun Qin, Yali Shao, Lili Jia, Qi Li, Yingcheng Hu

Coatings· Volume 9· Issue 7

Abstract

Transparent jute fiber (TJF) was prepared from delignified jute fiber (DJF) and was subjected to various surface knitting densities (190 and 340 g/m2) before epoxy resin (ER) impregnation under vacuum. The preparation process and properties of TJF were evaluated. The mechanical properties and surface morphology of the jute fiber samples were also studied. The mechanical properties were compared with transparent coir fiber (TCF) and transparent balsa wood (TBW). Optical properties, such as surface color, optical transmittance, and visual haze, of natural jute fiber (JF) and TJF were measured to better understand the influence of delignification. The experimental results showed transparency of 51% even for dense jute fiber cloth, and the maximum transmittance was as high as 60% with a low surface density. TJF had similar tensile strength as TBW but was higher than TCF, indicating a maximum tensile strength of 43.25 MPa with a surface density of 340 g/m2. These results suggest that TJF has the potential to meet the particular optical and mechanical properties of transparent wood. Transparent jute fiber can replace transparent wood for industrial production because of the simple preparation process and lower price.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, China

Key Laboratory of Bio-Based Material Science and Technology of Ministry of Education of China, College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, China

Funding

National Natural Science Foundation of China · Fundamental Research Funds for Central Universities

References (24)

Show source-provided references
1. Optimization of delignification process for efficient preparation of transparent wood with high strength and high transmittance10.1016/j.vacuum.2018.09.058 ↗
2. Transparent wood bearing a shielding effect to infrared heat and ultraviolet via incorporation of modified antimony-doped tin oxide nanoparticles10.1016/j.compscitech.2019.01.005 ↗
3. Transparent wood—A new approach in the functional study of wood structure10.1515/hfsg.1992.46.5.403 ↗
4. Wood composite as an energy efficient building material: Guided sunlight transmittance and effective thermal insulation10.1002/aenm.201601122 ↗
5. Application of light guide lighting technology
6. Transparent wood for functional and structural applications
7. Study on “Visual Power” of wood texture
8. Transparent wood containing CsxWO3 nanoparticles for heat-shielding window applications10.1039/C7TA00261K ↗
9. Transparent wood composites for highly efficient broadband light management in solar cells10.1016/j.nanoen.2016.05.020 ↗
10. Luminescent transparent wood10.1002/adom.201600834 ↗
11. Transparent plywood as a load-bearing and luminescent biocomposite10.1016/j.compscitech.2018.06.001 ↗
12. Luminescent and transparent wood composites fabricated by PMMA and γ-Fe2O3@YVO4:Eu3+ nanoparticles impregnation10.1021/acssuschemeng.6b02985 ↗
13. Impact of delignification on morphological, optical and mechanical properties of transparent wood10.1016/j.compositesa.2018.12.004 ↗
14. Large-size transparent wood for energy-saving building applications10.1002/cssc.201801826 ↗
15. Jin, J. (2007). Research on Jute Fiber Refining Technology. [Master’s Thesis, Donghua University].
16. Zhang, R. (2011). Study on properties of jute fiber PLA composites. [Master’s Thesis, Qingdao University].
17. Mechanical properties of PP/jute fiber composites for automotive interior decoration
18. (2007). ASTM D1003-07 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics, ASTM International.
19. Transparent cellulose nanopaper10.1038/srep41590 ↗
20. Cavallaro, G., Danilushkina, A., Evtugyn, V., Lazzara, G., Milioto, S., Parisi, F., Rozhina, E., and Fakhrullin, R. (2017). Halloysite nanotubes: Controlled access and release by smart gates. Nanomaterials, 7.10.3390/nano7080199 ↗
21. Halloysite nanotubes loaded with calcium hydroxyde: alkaline fillers for the deacidification of waterlogged archeological woods10.1021/acsami.8b09416 ↗
22. Surface bacteriostasis of wood-plastic composites modified by ultraviolet grafting
23. Anti-aging properties of nano-zinc oxide modified wood-plastic composites
24. Progress in transparent wood research