The Effect of Cr Content on the Oxidation Behavior of Ti-Cr-N Films
Source abstract
Abstract
Ti1−xCrxN thin-film samples were sputter-deposited with lateral composition gradients x = 0.1–0.9 across each sample. In order to determine the effect of Cr content on oxidation, samples were air-oxidized at temperatures ranging from 650 to 950 °C. The extent and type of oxide formed was characterized using X-ray diffraction. Only minor oxidation was observed for the 650–750 °C temperature range. At 850 °C, films below x = 0.7 showed poor oxidation resistance, with the formation of TiO2 and Cr2O3 oxides, but little oxidation occurred above x = 0.7. At 950 °C, films above x = 0.7 again exhibited the best oxidation resistance. Chromium nitride films, which deposited as Cr2N, were found to begin oxidizing at 750 °C, indicating that the increased oxidation resistance of the higher-Cr Ti-Cr-N films can be attributed to the Ti-induced stabilization of the B1-structured phase. A compositionally-uniform film (x = 0.79) was also deposited and analyzed by XPS before and after oxidation. Oxidation resulted in primarily Cr2O3 at the surface, with some TiO2 also present, with the oxide richer in Cr than the starting film composition. These results suggested that at higher Cr compositions in the film, the oxidation mechanism was controlled by Cr diffusion to the surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Science Program, University of New Hampshire, Durham, NH 03824, USA
Mechanical Engineering Department, University of New Hampshire, Durham, NH 03824, USA
References (24)
Show source-provided references
1. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
2. Münz, W.-D. (1986). Titanium aluminum nitride films: A new alternative to TiN coatings. J. Vac. Sci. Technol. A, 4.10.1116/1.573713 ↗
3. Superhard nanocomposite Ti1−xAlxN films prepared by magnetron sputtering10.1016/S0040-6090(00)00653-2 ↗
4. Grain size evaluation of pulsed TiAlN nanocomposite coatings for cutting tools10.1016/j.tsf.2006.11.002 ↗
5. Superhard nanocrystalline composite materials—The TiN/Si3N4 system10.1063/1.113110 ↗
6. Mechanical and tribological properties of nanocomposite TiSiN coatings10.1016/j.surfcoat.2009.11.034 ↗
7. Mechanical properties and oxidation behavior of Ti-Si-N films prepared by plasma-assisted CVD10.1002/(SICI)1521-3862(199912)5:6<275::AID-CVDE275>3.0.CO;2-J ↗
8. Microstructure and mechanical properties of Ti-Si-N coatings10.1557/JMR.2002.0381 ↗
9. Ion assisted deposition of titanium chromium nitride10.1016/j.tsf.2005.05.005 ↗
10. Characterization of titanium chromium nitride nanocomposite protective coatings10.1016/j.apsusc.2004.02.019 ↗
11. Effect of the Cr content on the mechanical properties of nanostructured TiN/CrN coatings10.1016/j.surfcoat.2003.09.020 ↗
12. Mechanical properties of (Ti, Cr)N coatings deposited by inductively coupled plasma assisted direct current magnetron sputtering10.1016/S0257-8972(03)00146-4 ↗
13. Structural and mechanical properties of nanostructured TiAlCrN thin films deposited by cathodic arc deposition10.1515/htmp-2012-0117 ↗
14. Effect of nitrogen pressure on the hardness and chemical states of TiAlCrN coatings10.1116/1.1830498 ↗
15. Microstructure and mechanical behavior of TiAlCrN multilayer thin films10.1016/j.surfcoat.2003.09.023 ↗
16. Tribolgical properties of TiAlCrN Thin Films
17. Properties of TiAlCrN coatings prepared by vacuum cathodic arc ion plating10.1016/S1001-0521(08)60124-2 ↗
18. High temperature oxidation behavior of (Ti1−xCrx)N coatings10.1016/S0040-6090(96)08789-5 ↗
19. High temperature oxidation of TiCrN coatings deposited by ion plating10.1016/S0257-8972(01)01237-3 ↗
20. High-temperature oxidation behaviors of (Ti1−xCrx)N coatings10.1023/A:1014992125235 ↗
21. TEM study on oxidized TiCrN coatings ion-plated on a steel substrate10.1016/S0257-8972(03)00519-X ↗
22. Oxidation of arc-ion plated CrN coatings at elevated temperatures10.1149/1.1471545 ↗
23. Moulder, J.F., Stickle, W.F., Sobol, D.E., and Bomben, K.D. (1995). Physical Electronics, Inc.
24. Oxidation of an NiTi alloy10.1002/sia.740150602 ↗