Yttria-Coated Tungsten Fibers for Use in Tungsten Fiber-Reinforced Composites: A Comparative Study on PVD vs. CVD Routes
Source abstract
Abstract
Tungsten fiber-reinforced tungsten (Wf/W) composites are being developed to improve the intrinsic brittleness of tungsten. In these composites, engineered fiber/matrix interfaces are crucial in order to realize toughening mechanisms. For such a purpose, yttria (Y2O3), being one of the suitable interface materials, could be realized through different coating techniques. In this study, the deposition of thin films of yttria on a 150 µm tungsten wire by physical and chemical vapor deposition (PVD and CVD) techniques is comparatively investigated. Although fabrication of yttria is feasible through both CVD and PVD routes, certain coating conditions such as temperature, growth rate, oxidation of Wf, etc., decide the qualitative nature of a coating to a particular extent. In the case of PVD, the oxidation of Wf is highly reduced compared to the WO3 formation in high-temperature CVD coating processes. Yttria-coated tungsten fibers are examined comprehensively to characterize their microstructure, phase, and chemical composition using SEM, XRD, and Raman spectroscopy techniques, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Group of Composites and Material Compounds, Institute of Materials Science and Engineering (IWW), Chemnitz University of Technology, 09125 Chemnitz, Germany
Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung Plasmaphysik, Partner in the Trilateral Euregio Cluster, 52425 Jülich, Germany
Max Planck Institute for Plasma Physics (IPP), 85748 Garching, Germany
Group of Plasma Component Interaction, Technical University Munich, 85748 Garching, Germany
Funding
UK Atomic Energy Authority
References (36)
Show source-provided references
1. The European integrated materials and technology programme in fusion10.1016/j.jnucmat.2004.04.339 ↗
2. Materials for DEMO and reactor applications—boundary conditions and new concepts10.1088/0031-8949/2016/T167/014002 ↗
3. Plasma facing and high heat flux materials—Needs for ITER and beyond10.1016/S0022-3115(02)01175-3 ↗
4. Development of advanced high heat flux and plasma-facing materials10.1088/1741-4326/aa6f71 ↗
5. Materials for the plasma-facing components of fusion reactors10.1016/j.jnucmat.2004.04.005 ↗
6. Advanced materials for a damage resilient divertor concept for DEMO: Powder-metallurgical tungsten-fiber reinforced tungsten10.1016/j.fusengdes.2016.12.006 ↗
7. Tungsten as material for plasma-facing components in fusion devices10.1016/j.jnucmat.2011.01.110 ↗
8. Structural materials for DEMO: The EU development, strategy, testing and modelling10.1016/j.fusengdes.2007.06.031 ↗
9. The European power plant conceptual study10.1016/j.fusengdes.2005.06.095 ↗
10. Du, J. (2010). A Feasibility Study of Tungsten-Fiber-Reinforced Tungsten Composites with Engineered interfaces. Dissertation.10.1016/j.compscitech.2010.04.028 ↗
11. In situ synchrotron tomography estimation of toughening effect by semi-ductile fiber reinforcement in a tungsten-fiber-reinforced tungsten composite system10.1016/j.actamat.2013.07.035 ↗
12. Influence of the interface strength on the mechanical properties of discontinuous tungsten fiber-reinforced tungsten composites produced by field assisted sintering technology10.1016/j.compositesa.2018.01.022 ↗
13. Failure of fiber-reinforced composites by pull-out fracture10.1007/BF01117378 ↗
14. Chawla, K.K. (2019). Composite Materials, Springer.10.1007/978-3-030-28983-6 ↗
15. A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites10.1016/0022-5096(91)90043-N ↗
16. Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC / SiC composites by NITE process10.1016/j.compscitech.2007.05.037 ↗
17. Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridization with thin-ply carbon prepreg10.1016/j.compositesa.2013.04.006 ↗
18. Feasibility study of a tungsten wire-reinforced tungsten matrix composite with ZrOx interfacial coatings10.1016/j.compscitech.2010.04.028 ↗
19. Growth and characterization of yttrium oxide films by reactive magnetron sputtering10.1016/j.tsf.2011.01.049 ↗
20. High-pressure induced phase transitions of Y2O3 and Y2O3:Eu3+10.1063/1.3082082 ↗
21. Effects of precursor evaporation temperature on the properties of the yttrium oxide thin films deposited by microwave electron cyclotron resonance plasma assisted metal—organic chemical vapor deposition10.1016/j.tsf.2010.12.004 ↗
22. Structural and optical properties of yttrium trioxide thin films prepared by RF magnetron sputtering10.1016/j.vacuum.2011.04.016 ↗
23. Phase transitions and thermodynamic properties of yttria, Y2O3: Inelastic neutron scattering shell model and first-principles calculations10.1103/PhysRevB.84.094301 ↗
24. Handbook of activation data calculated using EASY-2007
25. Atomic Layer Deposition of Y2O3 Using Tris(butylcyclopentadienyl)yttrium and Water10.1134/S1063739719010025 ↗
26. Study on reactive sputtering of yttrium oxide: Process and thin film properties10.1016/j.surfcoat.2015.06.052 ↗
27. Research update: Progress in synthesis of nanoparticle dimers by self-assembly10.1063/1.4858295 ↗
28. The influence of annealing on yttrium oxide thin film deposited by reactive magnetron sputtering: Process and microstructure10.1016/j.nme.2016.12.031 ↗
29. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
30. Recent aspects concerning DC reactive magnetron sputtering of thin films: A review10.1016/S0257-8972(00)00566-1 ↗
31. Rasband, W.S. (2021, July 15). ImageJ, Available online: https://imagej.nih.gov/ij/.
32. Luminescent and structural analysis of yttrium oxide doped with different percentages of terbium and dysprosium, to obtain different shades of green to yellow
33. Investigation of activated oxygen molecules on the surface of Y2O3 nanocrystals by Raman scattering10.1063/1.4820465 ↗
34. XRD Database [PDF00-004-0806]
35. Martin, K., and McCarthy, G. XRD Database [PDF00-041-1105]; ICDD Grant-in-Aid, North Dakota State University.
36. XRD Database [PDF00-036-0103]10.1016/0022-4596(82)90149-9 ↗