Experimental Study on Performance of Local Bond-Slip Test of Steel Strand Tendons and Concrete
Source abstract
Abstract
In order to study the bond-slip constitutive model between prestressed tendons and concrete, the pull-out tests of single-strand and multi-strands specimens are carried out. The effect of the number of prestressed tendons on the failure mode, slip characteristics and concrete strain of the pull-out specimens are analyzed, and the constitutive models of bond-slip between for single- strand and multi-strand tendons are also proposed. The results show that the bond mechanism between steel strand and concrete is basically similar to that of deformed steel bar, but the slip process of steel strand along the axis direction is accompanied by rotation phenomenon because it is twisted. Moreover, compared with the single-strand prestressed tendon, the average ultimate bond stress of each tendon of the three-strand prestressed tendons decreases by 13.2%. In addition, the calculated result of the pull-out limit load for the single-strand prestressed tendon is only 2% higher than the experimental value, while the corresponding value of three-strand prestressed tendon is only 3.74% lower than the experimental value. This means that the proposed bond-slip models for single- strand and multi-strand tendons have high reliability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Hunan City University, Yiyang 413000, China
Hunan Engineering Research Center of Structural Safety and Disaster Prevention for Urban Underground Infrastructure, Hunan City University, Yiyang 413000, China
School of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China
Funding
Hunan Provincial Natural Science Foundation of China · Research Foundation of Education Bureau of Hunan Province
References (22)
Show source-provided references
1. Quantification of bond performance of 18-mm prestressing steel10.1016/j.conbuildmat.2017.10.131 ↗
2. Secondary transfer length and residual prestress of fractured strand in post-tensioned concrete beams10.1007/s11709-022-0809-1 ↗
3. Experimental research for flexural behavior on concrete beams with local corrosion fracture of strands
4. Determining bond strength of seven-wire strands in prestressed concrete10.1016/j.istruc.2021.06.004 ↗
5. Mechanical behaviour of corroded strands under chloride attack: A new constitutive law10.1016/j.conbuildmat.2021.125872 ↗
6. Study on bond-slip property of high strength stainless steel strand and ECC
7. Transfer length prediction in pre-tensioned concrete beams under corrosive cracking10.1016/j.istruc.2021.01.064 ↗
8. FEM Simulations of Bond Behaviour between Concrete and Seven-Wire Prestressing Strand10.1088/1757-899X/960/3/032076 ↗
9. FEM Analysis of Bond between Concrete and Seven-Wire Prestressing Strand10.1088/1757-899X/960/3/032077 ↗
10. Secondary Anchorage in Post-Tensioned Bridge Systems
11. Behavior of Tendons with Multiple CFRP Rods10.1061/(ASCE)ST.1943-541X.0001535 ↗
12. Bond performance of grouted tendons at elevated temperatures10.1680/jstbu.20.00090 ↗
13. Bond-slip relational model between high-strength stainless steel wire mesh and ECC
14. Experimental investigation on the mechanical properties of a bond-type anchor for carbon fiber reinforced polymer tendons10.1016/j.compstruct.2018.05.153 ↗
15. (2018). Specifications for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts (Standard No. JTG 3362-2018).
16. (2021). Metallic Materials-Tensile Testing-Part 1: Method of Test at Room Temperature (Standard No. GB/T228.1-2021).
17. Wang, X.Z., Yang, Y.M., Yang, R.H., and Liu, P. (2022). Experimental Analysis of Bearing Capacity of Basalt Fiber Reinforced Concrete Short Columns under Axial Compression. Coatings, 12.10.3390/coatings12050654 ↗
18. CEB-FIP (2010). FIB Model Code for Concrete Structures, Ernst & Sohn.
19. Zhang, X.H. (2016). Theory of Computation of Corrosion Prestressed Reinforcement and Concrete Deformation Coordination and Component Bearing Capacity. [Ph.D. Thesis, Changsha University of Science and Technology].
20. Experimental study on flexural fatigue performance of partially prestressed concrete beams after steel strand corrosion
21. Local and global bond characteristics of steel reinforcing bars10.1016/j.engstruct.2007.04.007 ↗
22. (2019). Code for Design of Concrete Structures (Standard No. GB 50010-2020).