Gellan Gum-Montmorillonite Nanocomposites for Electrochromic Devices
Source abstract
Abstract
The present paper shows the results of nanocomposite polymer electrolytes (SPEs) of montmorillonite (MMT; Na+SYN-1) and gellan gum obtained by the solution casting method. The membrane samples were characterized by ATR-FTIR, time-domain nuclear magnetic resonance (TD-NMR), and scanning electron microscopy (SEM). Then, two samples were chosen and applied in small electrochromic devices (ECDs). The ATR-FTIR revealed shifts in bands of acetate and glycosidic bonds at 1032 and 1611 cm−1, respectively, indicating an interaction between the gellan gum and Na+SYN-1. The spin–lattice relaxation time of the proton nuclei (T1) suggests the poor dispersion of MMT in the matrix, especially above 20 wt.%. However, SEM pictures pointed to a more homogeneous surface of the nanocomposite containing 40 wt.% Na+SYN-1 when compared to the sample without clay. NPEs with 10 and 40 wt.% Na+SYN-1 were applied in ECDs, and the voltammograms showed a decrease in anodic and cathodic peaks after 2519 chronocoulometric cycles for the sample with 10 wt.% Na+SYN-1 and after 420 cycles for the sample with 40 wt.% Na+SYN-1. There was also a decrease in the charge density in both ECDs and an oscillating difference in transmittance between the colored/discolored states during the chronocoulometric cycles of the ECD with GG-MMT10. Further studies may reveal more property improvements in gellan gum nanocomposites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto de Química de São Carlos, Universidade de São Paulo, Av. Trabalhador Sãocarlense 400, São Carlos 13566-590, SP, Brazil
Embrapa Instrumentação, Rua XV de Novembro, 1452, São Carlos 13560-970, SP, Brazil
INRAE, UR OPAALE, 17 Avenue de Cucillé, CS 64427, 35044 Rennes, France
Funding
Brazilian National Council for Scientific and Technological Development (CNPq) · Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)
References (60)
Show source-provided references
1. Polyurethane/clay nanocomposites with improved helium gas barrier and mechanical properties: Direct versus master-batch melt mixing route10.1002/app.46422 ↗
2. Improved flame retardancy and thermal stability of polymer/clay nanocomposites, with the incorporation of multiwalled carbon nanotube as secondary filler: Evaluation of hybrid effect of nanofillers10.1177/0954008314531802 ↗
3. Improved oxygen reduction reaction catalyzed by pt/clay/Nafion nanocomposite for PEM fuel cells10.1021/am300697q ↗
4. Study of ionically conducting nanocomposites for reflective electrochromic devices10.1016/j.electacta.2019.01.130 ↗
5. Thermal properties of poly (methyl methacrylate)/organomodified montmorillonite nanocomposites obtained by in situ photopolymerization10.1590/S1516-14392013005000173 ↗
6. Dielectric properties of polymer/clay nanocomposites
7. Role of clay intercalation in the structural, and thermal property of a polymer blend electrolyte10.1016/j.matpr.2021.05.339 ↗
8. Weathering, salt spray corrosion and mar resistance mechanism of clay (nano-platelet) reinforced polyurethane nanocomposite coatings10.1016/j.porgcoat.2019.01.028 ↗
9. Active nanocomposite films based on soy proteins-montmorillonite-clove essential oil for the preservation of refrigerated bluefin tuna (Thunnus thynnus) fillets10.1016/j.ijfoodmicro.2017.10.003 ↗
10. Studies on the dyeability and dyeing mechanism of polyurethane/clay nanocomposite filaments with acid, basic and reactive dyes10.1111/cote.12332 ↗
11. Dyartanti, E.R., Purwanto, A., Widiasa, I.N., and Susanto, H. (2018). Ionic Conductivity and Cycling Stability Improvement of PVDF/Nano-Clay Using PVP as Polymer Electrolyte Membranes for LiFePO4 Batteries. Membranes, 8.10.3390/membranes8030036 ↗
12. Phenotypic and proteomic analysis of positively regulated gellan biosynthesis pathway in Sphingomonas elodea10.1080/19768354.2017.1290678 ↗
13. Application of gellan gum in pharmacy and medicine10.1016/j.ijpharm.2014.03.038 ↗
14. Characteristics of gellan gum-LiCF3SO3 polymer electrolyte10.1016/j.ssi.2012.03.019 ↗
15. Gellan gum methacrylate and laponite as an innovative nanocomposite hydrogel for biomedical applications10.1016/j.eurpolymj.2016.02.007 ↗
16. Study of electrical and electrochemical properties of P (VdF-HFP)-MMT based nanocomposite gel polymer electrolytes for application in energy storage devices10.1016/j.mseb.2020.114822 ↗
17. Characterization of recycled thermoplastics-based nanocomposites: Polymer-clay compatibility, blending procedure, processing condition, and clay content effects10.1016/j.compositesb.2017.07.057 ↗
18. Investigations on thermo-mechanical properties of organically modified polymer clay nanocomposites for packaging application
19. Polymer-clay nanocomposite solid-state electrolyte with selective cation transport boosting and retarded lithium dendrite formation10.1002/aenm.202003114 ↗
20. In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry10.3906/kim-2007-62 ↗
21. Peng, W., Feng, C., Hou, J., Zhang, R., Sun, P., Gao, Y., and Wang, X. (2022). Probing the Dynamic Structural Evolution of End-Functionalized Polybutadiene/Organo-Clay Nanocomposite Gels before and after Yielding by Nonlinear Rheology and 1H Double-Quantum NMR. Polymers, 14.10.3390/polym14081518 ↗
22. Effect of nano-clay on ionic conductivity and electrochemical properties of poly (vinylidene fluoride) based nanocomposite porous polymer membranes and their application as polymer electrolyte in lithium ion batteries10.1016/j.eurpolymj.2012.10.033 ↗
23. Chemically Specific Multiscale Modeling of Clay–Polymer Nanocomposites Reveals Intercalation Dynamics, Tactoid Self-Assembly and Emergent Materials Properties10.1002/adma.201403361 ↗
24. Rapid and simple determination of T1 relaxation times in time-domain NMR by Continuous Wave Free Precession sequence10.1016/j.jmr.2016.06.019 ↗
25. Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters10.1002/mrc.4806 ↗
26. Li+ doped chitosan-based solid polymer electrolyte incorporated with PEDOT: PSS for electrochromic device
27. ZrO2-silane-graft-PVdFHFP hybrid polymer electrolyte: Synthesis, properties and its application on electrochromic devices10.1016/j.electacta.2017.01.161 ↗
28. Synthesis of poly (methyl methacrylate)-succinonitrile composite polymer electrolyte and its application for flexible electrochromic devices10.1016/j.solmat.2016.11.009 ↗
29. Solution-processable multicolor TiO2/polyaniline nanocomposite for integrated bifunctional electrochromic energy storage device10.1016/j.apsusc.2022.155015 ↗
30. Synthesis, characterizations, and electrochromic studies of WO3 coated CeO2 nanorod thin films for smart window applications10.1016/j.physb.2022.414395 ↗
31. Caliman, W.R., Sentanin, F.C., Sabadini, R.C., Donoso, J.P., Magon, C.J., and Pawlicka, A. (2022). Improved Conductivity in Gellan Gum and Montmorillonite Nanocomposites Electrolytes. Molecules, 27.10.3390/molecules27248721 ↗
32. On resonance phase alternated CWFP sequences for rapid and simultaneous measurement of relaxation times10.1016/j.jmr.2015.08.013 ↗
33. Numerical estimation of relaxation and diffusion distributions in two dimensions10.1016/j.pnmrs.2011.07.002 ↗
34. Prussian blue for electrochromic devices10.1016/j.jelechem.2016.05.007 ↗
35. Baseline studies of the clay minerals society source clays: Infrared methods10.1346/CCMN.2001.0490508 ↗
36. Structural Changes from the Pure Components to Nylon 6− Montmorillonite Nanocomposites Observed by Solid-State NMR10.1021/cm052798x ↗
37. Solid-state NMR investigation of paramagnetic nylon-6 clay nanocomposites. 2. Measurement of clay dispersion, crystal stratification, and stability of organic modifiers10.1021/cm011078x ↗
38. A high-resolution solid-state NMR study on starch–clay nanocomposites and the effect of aging on clay dispersion10.1038/pj.2010.48 ↗
39. Crossed characterisation of polymer-layered silicate (PLS) nanocomposite morphology: TEM, X-ray diffraction, rheology and solid-state nuclear magnetic resonance measurements10.1016/j.eurpolymj.2008.03.021 ↗
40. Evolution of clay morphology in polypropylene/montmorillonite nanocomposites upon equibiaxial stretching: A solid-state NMR and TEM approach10.1021/ma901754m ↗
41. Effect of Paramagnetic Fe3+ on T 1H in PVA/montmorillonite-clay Nanocomposites10.1246/cl.2004.816 ↗
42. (2018). Experimental Approaches of NMR Spectroscopy: Methodology and Application to Life Science and Materials Science, Springer.
43. Investigation of nanodispersion in polystyrene–montmorillonite nanocomposites by solid-state NMR10.1002/polb.10707 ↗
44. NMR measurements related to clay-dispersion quality and organic-modifier stability in nylon-6/clay nanocomposites10.1021/ma002089z ↗
45. Nanoparticle dispersion in polymer nanocomposites by spin-diffusion-averaged paramagnetic enhanced NMR relaxometry: Scaling relations and applications10.1039/C4CP02562H ↗
46. Properties of extruded xanthan-starch-clay nanocomposite films10.1590/S1516-89132011000600019 ↗
47. Ionically conducting Er3+-doped DNA-based biomembranes forelectrochromic devices10.1016/j.electacta.2013.12.006 ↗
48. Solid polymer electrolytes based on chitosan and Dy(CF3SO3)3 for electrochromic devices10.1016/j.ssi.2017.08.011 ↗
49. Electrochromic characteristics of radio frequency plasma sputtered WO3 thin films onto flexible polyethylene terephthalate substrates10.1016/j.tsf.2017.05.009 ↗
50. Flexible self-assembled polyelectrolyte thin films based on conjugated polymer: Quartz cristal microbalance dissipation (QCM-D) and cyclic voltammetry analysis10.1016/j.colsurfa.2018.12.014 ↗
51. Novel polymer electrolytes based on gelatin and ionic liquids10.1016/j.optmat.2012.07.027 ↗
52. Lithium trapping as a degradation mechanism of the electrochromic properties of all-solid-state WO 3//NiO devices10.1039/C8TC01372A ↗
53. Unveiling mechanical degradation for a monolithic electrochromic device: Glass/ITO/WO3/LiClO4 (PEO)/TiO2/ITO/glass10.1016/j.electacta.2019.135182 ↗
54. Thin and porous polymer membrane-based electrochromic devices10.1039/C8TC05157G ↗
55. Bard, A.J., and Faulkner, L.R. (2000). Electrochemical Methods: Fundamentals and Applications, Wiley. [2nd ed.].
56. Sustainable rejuvenation of electrochromic WO3 films10.1021/acsami.5b09035 ↗
57. Chen, W., Zhang, G., Wu, L., Liu, S., Cao, M., Yang, Y., and Peng, Y. (2022). Study of a Novel Electrochromic Device with Crystalline WO3 and Gel Electrolyte. Polymers, 14.10.3390/polym14071430 ↗
58. Life-cycling and uncovering cation-trapping evidence of a monolithic inorganic electrochromic device: Glass/ITO/WO 3/LiTaO 3/NiO/ITO10.1039/C8NR02267D ↗
59. Ultraviolet spectral reflectance of carbonaceous materials10.1016/j.icarus.2018.02.012 ↗
60. Fabrication of an all solid-state electrochromic device using zirconium dioxide as an ion-conducting layer10.1016/j.tsf.2018.08.030 ↗