journal article·2023-03-22Open access

The Microstructure Evolution and Dynamic Recrystallization Mechanism of Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr Alloys during High-Temperature Deformation

Meng Zhou, Yunzhang Li, Shunlong Tang, Yijie Ban, Yi Zhang, Bin Gan, Xu Li, Lihua Fu, Baohong Tian, Yong Liu, Alex A. Volinsky

Coatings· Volume 13· Issue 3

Abstract

Copper alloys with a combination of good electrical conductivity and mechanical properties are widely used in automotive electronics, large-scale integrated circuits, and other fields. In this study, a new type of Cu–Ni–Si alloy with added trace elements of Co and Cr was fabricated. Hot compression tests of this alloy at different temperatures and strain rates were conducted using a Gleeble-1500D simulator. Then, the microstructure transformation and precipitation behaviors of the Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr alloy were studied during a hot deformation process. The results show that the hot deformation behavior of the Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr alloy includes continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). The intensity of the texture in the microstructure is decreased, and the randomness of the texture in the microstructure is increased together with the recrystallization progress. The degree of recrystallization of the new Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr alloy is increased when the hot deformation temperature rises. Additionally, the results indicate that there are two types of precipitates which are formed in the alloy during the hot deformation process. These two precipitates can pin dislocations and grain boundaries, and therefore, they significantly improve the hot compression resistance of the Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Provincial and Ministerial Co-Construction of Collaborative Innovation Center for Non-Ferrous Metal New Materials and Advanced Processing Technology, School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China

Henan Province Key Laboratory of Nonferrous Materials Science and Processing Technology, Luoyang 471023, China

Beijing Key Laboratory of Advanced High Temperature Materials, Central Iron and Steel Research Institute, Beijing 100081, China

Center for Advanced Measurement Science, National Institute of Metrology, Beijing 100029, China

Department of Mechanical Engineering, University of South Florida, Tampa, FL 33620, USA

Funding

National Natural Science Foundation of China · Outstanding Talents Innovation Fund of Henan Province · Program for Innovative Research Teams at the University of the Henan Province · China Postdoctoral Science Foundation

References (34)

Show source-provided references
1. Explosive Strengthening of a Cu-Be Alloy10.1007/BF02641968 ↗
2. Simultaneous Enhancement of Electrical Conductivities and Mechanical Properties in Cu-Ti Alloy by Hydrogenation Process10.4028/www.scientific.net/MSF.654-656.1319 ↗
3. Ultrahigh Strength and High Electrical Conductivity Characteristics of Cu-Zr Alloy Wires with Nanoscale Duplex Fibrous Structure10.2320/matertrans.47.1595 ↗
4. A High Strength and High Electrical Conductivity Cu-Cr-Zr Alloy Fabricated by Cryorolling and Intermediate Aging Treatment10.1016/j.msea.2016.10.087 ↗
5. Structure and Strength of the Age Hardened Cu–Ni–Si Alloy10.1016/S0254-0584(02)00451-0 ↗
6. Properties and Precipitates of the High Strength and Electrical Conductivity Cu-Ni-Co-Si-Cr Alloy10.1016/j.jmst.2021.03.049 ↗
7. A Review of Microstructure and Texture Evolution with Nanoscale Precipitates for Copper Alloys10.1016/j.jmrt.2020.08.055 ↗
8. Strengthening of Cu–Ni–Si Alloy Using High-Pressure Torsion and Aging10.1016/j.matchar.2014.01.006 ↗
9. Influence of Mg Addition on Crystallisation Kinetics and Structure of the Zn-Al-Cu Alloy10.1515/amm-2016-0132 ↗
10. On the Effect of Ti Addition on Microstructural Evolution, Precipitate Coarsening Kinetics and Mechanical Properties in a Co–30Ni–10Al–5Mo–2Nb Alloy10.1016/j.mtla.2021.101072 ↗
11. Effect of V Addition on Microstructures and Mechanical Properties of Cu-15Ni-8Sn Alloy10.1016/j.msea.2019.01.084 ↗
12. Effect of Ge and Mg Additions on the Aging Response Behavior and Mechanical Properties of Al-Si-Cu Alloy10.1016/j.msea.2021.141024 ↗
13. Excellent Mechanical Properties and High Electrical Conductivity of Cu-Co-Si-Ti Alloy Due to Multiple Strengthening10.1016/j.msea.2021.141639 ↗
14. Correlations between Microstructures and Properties of Cu-Ni-Si-Cr Alloy10.1016/j.msea.2018.06.075 ↗
15. Influence of Co on Strength of Cu-Ni-Co-Si Alloy10.4028/www.scientific.net/MSF.783-786.2468 ↗
16. Microstructure and Properties of a High-Strength Cu-Ni-Si-Co-Zr Alloy10.1007/s11665-013-0482-6 ↗
17. Correlation Mechanism of Grain Orientation/Microstructure and Mechanical Properties of Cu–Ni–Si–Co Alloy10.1016/j.msea.2021.141239 ↗
18. Evaluation of Nanoscaled Precipitates in a Cu–Ni–Si–Cr Alloy during Aging10.1016/j.jallcom.2014.06.089 ↗
19. Effects of Cr Addition on the Constitutive Equation and Precipitated Phases of Copper Alloy during Hot Deformation10.1016/j.matdes.2020.108613 ↗
20. Hot Deformation and Dynamic Recrystallization Behavior of Cu-3Ti-3Ni-0.5 Si Alloy10.1016/j.jallcom.2018.12.212 ↗
21. A Physically-Based Constitutive Model for High Temperature Deformation of Cu-0.36 Cr-0.03 Zr Alloy10.1016/j.jallcom.2015.06.264 ↗
22. Microstructure Evolution and Dislocation Strengthening Mechanism of Cu–Ni–Co–Si Alloy10.1016/j.msea.2021.142023 ↗
23. Effect of Y Addition on Microstructure Evolution and Precipitation of Cu-Co-Si Alloy during Hot Deformation10.1016/j.matchar.2021.111502 ↗
24. Hot Deformation Behavior, Dynamic Recrystallization, and Physically-Based Constitutive Modeling of Plain Carbon Steels10.1016/j.msea.2015.03.104 ↗
25. A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization10.1016/1359-6454(95)00146-7 ↗
26. Dynamic Restoration Mechanisms in a Ti–Nb Stabilized Ferritic Stainless Steel during Hot Deformation10.1016/j.msea.2014.02.039 ↗
27. EBSD Study of a Hot Deformed Nickel-Based Superalloy10.1016/j.jallcom.2015.04.008 ↗
28. Effect of Strain Rate on Microstructure Evolution of a Nickel-Based Superalloy during Hot Deformation10.1016/j.matdes.2015.05.004 ↗
29. Strain Rate Dependent Microstructural Evolution during Hot Deformation of a Hot Isostatically Processed Nickel Base Superalloy10.1016/j.jallcom.2016.04.185 ↗
30. EBSD Analysis of Hot Deformation Behavior of Cu-Ni-Co-Si-Cr Alloy10.1016/j.matchar.2020.110656 ↗
31. Effect of Strain Rate on the Microstructural Development through Continuous Dynamic Recrystallization in a Microalloyed Steel10.1016/j.msea.2010.01.077 ↗
32. Dynamic Recrystallization Mechanism and Improved Mechanical Properties of a near α High Temperature Titanium Alloy Processed by Severe Plastic Deformation10.1016/j.matchar.2020.110281 ↗
33. Influence of Deformation and Annealing Twinning on the Microstructure and Texture Evolution of Face-Centered Cubic High-Entropy Alloys10.1016/j.actamat.2018.02.048 ↗
34. Texture and Fatigue Behavior of Ultrafine Grained Copper Produced by ECAP10.1016/j.msea.2014.05.011 ↗