journal article·2023-05-30Open access

Reverse Engineering Analysis of Optical Properties of (Ti,Cu)Ox Gradient Thin Film Coating

Jarosław Domaradzki, Michał Mazur, Damian Wojcieszak, Artur Wiatrowski, Ewa Mańkowska, Paweł Chodasewicz

Coatings· Volume 13· Issue 6

Abstract

Analysis of the optical properties of a gradient (Ti,Cu)Ox thin film is presented in this paper. The thin film was prepared using reactive co-sputtering of Ti and Cu targets. The desired elemental concentration profiles of Cu and Ti versus the thin film thickness were obtained by changing the power delivered to the magnetron equipped with Cu, while the powering of the magnetron equipped with the Ti target was maintained at a constant level during the film deposition. Optical properties were analysed using the reverse engineering method, based on simultaneously measured optical transmittance and reflectance. Detailed microstructure analysis performed using transmission electron microscopy investigations revealed that the thin film consisted of at least four areas with different structural properties. Finding a satisfying fit of theoretical to experimental data required taking into account the heterogeneity in the material composition and microstructure in relation to the depth in the prepared gradient thin film. On the basis of the built equivalent layer stack model, the composition profile and porosity at the cross-section of the prepared gradient film were evaluated, which agreed well with the obtained elemental and microscopy studies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Electronics, Photonics and Microsystems, Wroclaw University of Science and Technology, Janiszewskiego 11/17, 50-372 Wroclaw, Poland

Funding

Polish National Science Centre

References (29)

Show source-provided references
1. Optical behaviour of graded-index multilayer films10.1016/0040-6090(74)90117-5 ↗
2. Graded SiOxNy layers as antireflection coatings for solar cells application
3. New designs for graded refractive index antireflection coatings10.1016/j.tsf.2004.11.119 ↗
4. Rugate filter design: The modified Fourier transform technique10.1364/AO.29.000024 ↗
5. Synthesis of gradient-index profiles corresponding to spectral reflectance derived by inverse Fourier transform10.1364/AO.26.004209 ↗
6. Optimal design and analysis of refractive index and thickness gradient optical films10.1016/j.rio.2021.100161 ↗
7. Gradient-index antireflection coatings10.1364/OL.8.000584 ↗
8. Design of optical path for wide-angle gradient-index antireflection coatings10.1364/AO.46.006533 ↗
9. Colours in Metal Glasses and in Metallic Films
10. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen10.1002/andp.19354160705 ↗
11. Fabrication and characterisation of graded refractive index silicon oxynitride thin films10.1116/1.580614 ↗
12. Choy, T.C. (2016). Effective Medium Theory: Principles and Applications, Oxford University Press.10.1093/acprof:oso/9780198705093.001.0001 ↗
13. Ohlídal, J., Vohánka, J., and Čermák, M. (2021). Optics of Inhomogeneous Thin Films with Defects: Application to Optical Characterization. Coatings, 11.10.3390/coatings11010022 ↗
14. Physical and dispersive optical characteristics of ZrON/Si thin-film system10.1007/s00339-013-7947-1 ↗
15. Investigation of the structural and optical properties of copper-titanium oxide thin films produced by changing the amount of copper10.1016/j.tsf.2019.06.052 ↗
16. Erratum: P-Type Cu-Ti-O Nanotube arrays and their use in self-biased heterojunction photoelectrochemical diodes for hydrogen generation10.1021/nl8022252 ↗
17. Analysis of electrical properties of forward-to-open (Ti,Cu)Ox memristor rectifier with elemental gradient distribution prepared using (multi)magnetron co-sputtering process10.1016/j.mssp.2019.01.034 ↗
18. Investigations of elemental composition and structure evolution in (Ti,Cu)-oxide gradient thin films prepared using (multi)magnetron co-sputtering10.1016/j.surfcoat.2017.11.038 ↗
19. Preparation of multicomponent thin films by magnetron co-sputtering method: The Cu-Ti case study10.1016/j.vacuum.2019.01.012 ↗
20. WTheiss (2023, May 25). SCOUT Software for Thin Film Analysis ver. 4.17. Available online: www.mtheiss.com.
21. (2013). Powder Diffraction File, Joint Commiittee on Powder Diffraction Standards, ASTM. (PDF Card 65-2309), PDF-2 Release 2013 Software ver. 4.13.3.6, Database ver. 2.1302.
22. Synthesis of CuO nano- and micro-structures and their Raman spectroscopic studies10.1039/b919043k ↗
23. Influence of thermal annealing on microstructural, morphological, optical properties and surface electronic structure of copper oxide thin films10.1016/j.matchemphys.2014.06.047 ↗
24. Modifying the nanocrystalline characteristics—Structure, size, and surface states of copper oxide thin films by high-energy heavy-ion irradiation10.1063/1.1499752 ↗
25. Optical properties of sputter deposited nanocrystalline CuO thin films10.1016/j.tsf.2019.01.037 ↗
26. Electrical and optical properties of copper oxide thin films prepared by DC magnetron sputtering10.1116/1.5131518 ↗
27. Spectroscopic ellipsometry data analysis: Measured versus calculated quantities10.1016/S0040-6090(97)00765-7 ↗
28. Modeling the optical dielectric function of semiconductors: Extension of the critical-point parabolic-band approximation10.1103/PhysRevB.45.11749 ↗
29. The relationship between the distribution of electronic states and the optical absorption spectrum of an amorphous semiconductor: An empirical analysis10.1063/1.365643 ↗