journal article·2023-06-02Open access

Research on Flexural and Freeze–Thaw Properties of Polypropylene-Fiber-Reinforced Pavement Concrete Containing Waterborne Epoxy

Li Wang, Bing Zhang, Hongliang Zhang, Bendong Zhao, Biao Wang, Quanman Zhao, Min Sun

Coatings· Volume 13· Issue 6

Abstract

In order to further enhance the reinforcing effectiveness of polypropylene (PP) fibers on pavement concrete, waterborne epoxy (WBE) was introduced in this research and its effect on the flexural properties and freeze–thaw resistance of PP-fiber-reinforced concrete was evaluated. Compressive-strength tests, flexural-strength tests, three-point bending tests, freeze–thaw cycling tests and a scanning electron microscopic observation were carried out to analyze mainly the influence of WBE on the flexural properties and freeze–thaw resistance of PP-fiber-reinforced concrete. WBE contents of 0, 5%, 10%, 15% and 20% by weight of the cement were employed. The experimental results indicated that WBE was beneficial to improving the flexural properties of PP-fiber-reinforced concrete. With increasing content of WBE, the flexural strength and the peak load showed significant increases. Although a slight degradation in the abovementioned flexural parameters was observed when the WBE content was above 15%, the deflection at the peak, the fracture energy and the fracture toughness still showed an upward trend. In addition, the freeze–thaw resistance of PP-fiber-reinforced concrete was improved remarkably with the increasing addition of WBE content, leading to smaller mass loss and higher residual flexural strength. Moreover, microstructural images revealed that with the addition of WBE, the PP fiber/concrete interfacial bonding was effectively improved, and the concrete matrix tended to be denser as well, which provided higher resistance for crack initiation and propagation. In consideration of maximally improving the flexural properties of PP-fiber-reinforced pavement concrete, and while ensuring the compressive strength and meeting the freeze–thaw requirements, it was recommended that the content of WBE in PP-fiber-reinforced concrete should be 15%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Transportation Engineering, Shandong Jianzhu University, Jinan 250101, China

Shaanxi Road and Bridge Engineering Testing Co., Ltd., Xi’an 710000, China

Key Laboratory for Special Area Highway Engineering of Ministry of Education, School of Highway, Chang’an University, Xi’an 710064, China

CCCC First Highway Consultants Co., Ltd., Xi’an 710000, China

Shaanxi Road and Bridge Group Co., Ltd., Xi’an 710065, China

Funding

Shandong Jianzhu University

References (46)

Show source-provided references
1. Mives multicriteria assessment of urban-pavement conditions: Application to a case study in Barcelona10.1080/14680629.2018.1474788 ↗
2. Design and performance of waterborne epoxy-SBR asphalt emulsion (WESE) slurry seal as under-seal coat in rigid pavement10.1016/j.conbuildmat.2020.121467 ↗
3. Park, J.J., Yoo, D.Y., Park, G.J., and Kim, S.W. (2017). Feasibility of reducing the fiber content in ultra-high-performance fiber-reinforced concrete under flexure. Materials, 10.10.3390/ma10020118 ↗
4. The effect of natural bamboo fiber and basalt fiber on the properties of autoclaved aerated concrete10.1016/j.conbuildmat.2023.131153 ↗
5. Effect of polypropylene plastic fibers length on cracking resistance of high performance concrete at early age10.1016/j.conbuildmat.2019.117874 ↗
6. Macro polypropylene fiber influences on crack geometry and water permeability of concrete10.1016/j.conbuildmat.2019.117128 ↗
7. Mechanical, durability, and microstructural properties of macro synthetic polypropylene (PP) fiber-reinforced rubber concrete10.1016/j.jclepro.2019.06.272 ↗
8. Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete10.1016/j.conbuildmat.2018.11.042 ↗
9. Properties of polypropylene fiber reinforced concrete using recycled aggregates10.1016/j.conbuildmat.2015.08.133 ↗
10. Performance evaluation of polypropylene fibre reinforced recycled aggregate concrete10.1016/j.conbuildmat.2018.09.036 ↗
11. Flexural fatigue performance of concrete containing nano-particles for pavement10.1016/j.ijfatigue.2006.10.004 ↗
12. Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber10.1016/j.conbuildmat.2018.11.181 ↗
13. Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete10.1016/j.ijsbe.2016.05.007 ↗
14. Del Savio, A.A., Esquivel, D.L.T., de Andrade Silva, F., and Agreda Pastor, J. (2023). Influence of Synthetic Fibers on the Flexural Properties of Concrete: Prediction of Toughness as a Function of Volume, Slenderness Ratio and Elastic Modulus of Fibers. Polymers, 15.10.3390/polym15040909 ↗
15. Combination of polypropylene fibre and superabsorbent polymer to improve physical properties of cement mortar10.1680/jmacr.17.00193 ↗
16. Enhancing fiber/matrix bonding in polypropylene fiber reinforced cementitious composites by microbially induced calcite precipitation pre-treatment10.1016/j.cemconcomp.2018.01.001 ↗
17. Effectiveness of chemical treatment on polypropylene fibers as reinforcement in pervious concrete10.1016/j.conbuildmat.2017.12.068 ↗
18. Bond characteristics of macro polypropylene fiber in cementitious composites containing nanosilica and styrene butadiene latex polymer10.1155/2015/207456 ↗
19. Wang, L., Zhang, H., Zhao, B., Wang, B., Zhao, Q., and Sun, M. (2023). Experimental Investigation on Physical Properties of Concrete Containing Polypropylene Fiber and Water-Borne Epoxy for Pavement. Coatings, 13.10.3390/coatings13020452 ↗
20. Influence of basalt-polypropylene fibres on fracture properties of high performance concrete10.1016/j.compstruct.2018.10.070 ↗
21. Experimental study on the fracture toughness of concrete reinforced with multi-size polypropylene fibres10.1680/jmacr.17.00474 ↗
22. Comparative study on the effect of synthetic fiber on the preparation and durability of airport pavement concrete10.1016/j.conbuildmat.2018.06.223 ↗
23. Frost resistance of polyvinyl alcohol fiber and polypropylene fiber reinforced cementitious composites under freeze thaw cycling10.1016/j.compositesb.2015.12.009 ↗
24. Freeze/thaw durability of concrete with synthetic fibre additions10.1016/j.coldregions.2012.06.006 ↗
25. Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume10.1016/j.compositesb.2012.10.006 ↗
26. The durability properties of polypropylene fiber reinforced fly ash concrete10.1016/j.matdes.2010.07.011 ↗
27. Abadel, A.A., and Alghamdi, H. Effect of high volume tile ceramic wastes on resistance of geopolymer mortars to abrasion and freezing-thawing cycles: Experimental and deep learning modelling, Ceram. Int., in press.
28. (2014). Technical Guidelines for Construction of Highway Cement Concrete Pavements (Standard No. JTG/T F30-2014).
29. (2005). Test Methods of Cement and Concrete for Highway Engineering (Standard No. JTG E30-2005).
30. (2003). Method of Test for Load-Displacement Curve of Fiber Reinforced Concrete by Use of Notched Beam (Standard No. JCI-S-002-2003).
31. Fundamental properties of epoxy resin-modified cement grouts10.1016/j.conbuildmat.2016.08.050 ↗
32. Investigation on mechanical and durability properties of polymer and latex-modified concretes10.1016/j.conbuildmat.2018.09.198 ↗
33. Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars10.1016/j.conbuildmat.2016.12.080 ↗
34. Study on the effect of waterborne epoxy resins on the performance and microstructure of cement paste10.1016/j.conbuildmat.2018.02.096 ↗
35. BSE-IA reveals retardation mechanisms of polymer powders on cement hydration10.1111/jace.16982 ↗
36. Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms10.1016/j.conbuildmat.2013.05.048 ↗
37. Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar10.1016/j.conbuildmat.2018.03.005 ↗
38. Research on the mechanism of polymer latex modified cement10.1016/j.conbuildmat.2016.02.117 ↗
39. Influence of mineral nano-fibers on the physical properties of road cement concrete material10.1016/j.conbuildmat.2018.09.025 ↗
40. Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study10.1016/j.conbuildmat.2015.10.006 ↗
41. Biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete with different fiber lengths and placement methods10.1016/j.cemconcomp.2015.07.011 ↗
42. Reinforcement effects of polyvinyl alcohol and polypropylene fibers on flexural behaviors of sulfoaluminate cement matrices10.1016/j.cemconcomp.2018.02.004 ↗
43. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beames
44. Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods10.1016/j.conbuildmat.2017.03.089 ↗
45. Xu, F., Li, T., Li, C., Li, Z., Wang, S., and Zhao, N. (2021). Compressive Behavior, Microstructural Properties, and Freeze–Thaw Behavior of Tailing Recycled Aggregate Concrete with Waste Polypropylene Fiber Addition. Materials, 14.10.3390/ma14216712 ↗
46. Polymer-modified pervious concrete for durable and sustainable transportation infrastructures10.1016/j.conbuildmat.2016.02.136 ↗