journal article·2024-10-04Open access

Study on the Wear Performance of Surface Alloy Coating of Inner Lining Pipe under Different Load and Mineralization Conditions

Yuntao Xi, Yucong Bi, Yang Wang, Lan Wang, Shikai Su, Lei Wang, Liqin Ding, Shanna Xu, Haitao Liu, Xinke Xiao, Ruifan Liu, Jiangtao Ji

Coatings· Volume 14· Issue 10

Abstract

Testing was carried out in this study to evaluate the friction and wear performance of 45# steel inner liner pipes with cladding, along with four different types of centralizing materials (45# steel, nylon, polytetrafluoroethylene (PTFE), and surface alloy coating) in oil field conditions. Under dry-friction conditions, the coefficients of friction and rates of wear are significantly higher than their counterparts in aqueous solutions. This is attributed to the lubricating effect provided by the aqueous solution, which reduces direct friction between contact surfaces, thereby lowering wear. As the degree of mineralization in the aqueous solution increases, the coefficient of friction tends to decrease, indicating that an elevated level of mineralization enhances the lubricating properties of the aqueous solution. The wear pattern in an aqueous solution is similar to that in dry-friction conditions under different loads, but with a lower friction coefficient and wear rate. The coating has played an important role in protecting the wear process of 45# steel, and the friction coefficient and wear rate of tubing materials under various environmental media have been significantly reduced. In terms of test load, taking into account the friction coefficient and wear rate, the suggested order for centralizing materials for lining oil pipes with the surface alloy coating is as follows: (i) surface alloy coating, (ii) nylon, (iii) PTFE, and (iv) 45# steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Material Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China

National Subsea Centre, Robert Gordon University, Aberdeen AB21 0BH, UK

No. 7 Oil Production Plant of Changqing Oilfield Company, Qingcheng 717600, China

Shaanxi Coal Industry New Energy Technology Co., Ltd., Xi’an 710199, China

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China

State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing 100084, China

Henan International Joint Laboratory of Dynamics of Impact and Disaster of Engineering Structures, Nanyang Institute of Technology, Nanyang 473004, China

State Key Laboratory for Mechanical Behavior of Materials, Xian Jiaotong University, Xi’an 710049, China

College of Chemistry & Chemical Engineering, Xi’an Shiyou University, Xi’an 710065, China

China Railway First Survey and Design Institute Group Co., Ltd., Xi’an 710043, China

Funding

National Natural Science Foundation of China · Youth Innovation team construction in Shaanxi Universities · Young Scientific Research and Innovation Team of Xi’an Shiyou University · Open Research Fund from the State Key Laboratory of Rolling and Automation, Northeastern University · Tribology Science Fund of State Key Laboratory of Tribology in Advanced Equipment · Henan International Joint Laboratory of Dynamics of Impact and Disaster of Engineering Structures, Nanyang Institute of Technology · State Key Laboratory for Mechanical Behavior of Materials · Open Foundation of Shaanxi Key Laboratory of Carbon Dioxide Sequestration and Enhanced Oil Recovery · Natural Science Basic Research Program of Shaanxi Province · China Scholarship Council Foundation · Postgraduate Innovation and Practical Ability Training Program of the Xi’an Shiyou University

References (31)

Show source-provided references
1. A comprehensive review on internal corrosion and cracking of oil and gas pipelines10.1016/j.jngse.2019.102971 ↗
2. Tao, R., Nan, Z.J., Wen, S., and Kang, X.Q. (2016). Analysis Method of Sucker Rod Centralizer Spacing in Three-Dimensional Hole, Atlantis Press.
3. Tribocorrosion performance of Fe-base and Ni-base wear resistant coatings in CO2 anoxic environments10.1016/j.corsci.2021.110035 ↗
4. Treiberg, T., and Furr, B. (2022, January 20–24). Wireless Sensor Technology to Monitor Rod Rotator Performance. Proceedings of the SPE Artificial Lift Conference and Exhibition-Americas, Galveston, TX, USA.10.2118/209767-MS ↗
5. Buckling of a twisted rod with centralizers in a tubing10.1016/j.petrol.2021.108731 ↗
6. Fiberglass-Lined Tubing Helps Prevent Asphaltene Deposition in Oil Wells
7. Development and Efficiency Testing of Sucker Rod Pump Downhole Desanders
8. Effect of SiO2 on microstructure and mechanical properties of composite ceramic coatings prepared by centrifugal-SHS process10.1016/j.ceramint.2021.01.144 ↗
9. Edappillikulangara Chinnappan, R., Telang, M., Quttainah, R., Radhakrishnan, G., Fernandes, A., and Rajendran, K. (2021, January 23–25). First Time Worldwide Application of Glass Reinforced Epoxy Lined Tubing for Prevention of Asphaltene Deposition on Tubing in Oil Wells-A Case Study from Kuwait. Proceedings of the International Petroleum Technology Conference, Virtual.10.2523/IPTC-21441-MS ↗
10. Downhole corrosion inhibitors for oil and gas production-a review10.1016/j.apsadv.2021.100128 ↗
11. High-Density Polyethylene Liner Safeguards against Corrosion and Wear
12. Zhao, R.D., Li, J.Y., Tao, Z., Liu, M., Shi, J.F., Xiong, C.M., Huang, H.X., Sun, C.Y., Zhang, Y.F., and Zhang, X.W. (2019, January 18–21). Research and Application of Rod/Tubing Wearing Prediction and Anti-Wear Method in Sucker Rod Pumping Wells. Proceedings of the SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain.10.2118/194955-MS ↗
13. Dynamic Simulation Analysis of Carbon-Steel Hybrid Sucker Rod String in Vertical and Directional Wells
14. Nickell, I.A. (2020, January 12). Surface Diagnostics and Analysis in Optimization Technologies for Sucker Rod Pump Lifted Oil and Gas Wells. Proceedings of the SPE Artificial Lift Conference and Exhibition-Americas, Virtual.10.2118/201155-MS ↗
15. Sucker Rod Anti-Buckling System: Development and Field Application
16. Sucker rod string dynamics in deviated wells10.1016/j.petrol.2019.106534 ↗
17. Synergy of hydrophilic nanoparticle and nonionic surfactant on stabilization of carbon dioxide-in-brine foams at elevated temperatures and extreme salinities10.1016/j.fuel.2020.119624 ↗
18. Influence of molybdenum content and load on the tribological behaviors of in-situ Cr3C2-20 wt % Ni composites10.1016/j.jallcom.2020.154180 ↗
19. Influence of Ni content on the microstructure and mechanical properties of chromium carbide-nickel composites10.1016/j.ceramint.2019.12.114 ↗
20. Equal Channel Angular Pressing of a TWIP steel: Microstructure and mechanical response10.1007/s10853-017-0862-7 ↗
21. Ultrasonic Vibration-Assisted Surface Plastic Deformation of a CrCoNi Medium Entropy Alloy: Microstructure Evolution and Mechanical Response10.1007/s11837-022-05448-0 ↗
22. Wear of polyethylene and polyurethane elastomers used for components working in natural abrasive environments10.1016/j.polymertesting.2021.107247 ↗
23. Barber, H., Kelly, C.N., Abar, B., Allen, N., Adams, S.B., and Gall, K. (2021). Rotational Wear and Friction of Ti-6Al-4V and CoCrMo against Polyethylene and Polycarbonate Urethane. Biotribology, 26.10.1016/j.biotri.2021.100167 ↗
24. Mechanism of size effects of a filler on the wear behavior of ultrahigh molecular weight polyethylene10.1016/j.cjche.2020.03.001 ↗
25. Effect of salinity on the corrosive wear be-haviour of engineering steels in aqueous solutions10.1016/j.wear.2020.203515 ↗
26. Wear behaviour of titanium based composites reinforced with niobium pentoxide in saline and acidic environments10.1016/j.heliyon.2023.e13737 ↗
27. Corrosion-wear evaluation of a UHMWPE/Co–Cr couple in sliding contact under relatively low contact stress in physiological saline solution10.1016/j.wear.2010.11.014 ↗
28. Tribocorrosion behaviour of Ti6Al4V under various normal loads in phosphate buffered saline solution10.1016/S1003-6326(20)65297-9 ↗
29. Effect of the normal load on the sliding wear behavior of Hadfield steels10.1016/j.wear.2023.204657 ↗
30. Ali, M., Hajjar, M.A., Fisher, J., and Jennings, L.M. (2023). Wear and deformation of metal-on-polyethylene hip bearings under edge loading conditions due to variations in component positioning. Biotribology, 33–34.10.1016/j.biotri.2023.100238 ↗
31. Effect of load on the stick-slip phenomenon and wear behavior of EPDM10.1016/j.polymertesting.2022.107737 ↗