The Device Using a Polydimethylsiloxane Membrane and the Phase Transition of Water
Source abstract
Abstract
The accumulation of ice on surfaces can cause harm in many industries. Our work describes an experiment and a simulation of the deicing effect based on a simple device combining a polydimethylsiloxane (PDMS) membrane and water phase transition. The device resulted in a minimum ice adhesion strength of 0.327 kPa, and the ice adhesion strength was still less than 5 kPa after 15 cycles, which meets the requirements of automatic deicing. It also held up after flushing with water and sand currents. In addition, our finite element simulation illustrates that the ice adhesion strength decreases greatly due to the change in initial stress distribution and the separation mode of ice. The fracture between the ice and membrane initiates from one side, and propagates gradually along the contour of ice while at the same time spreading rapidly towards the center. Compared with other icephobic methods, such as expensive and vulnerable micro/nano-surfaces or functional composite coatings, this low-cost and environment friendly device appears promising for large-scale deicing applications in various engineering fields.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Icing and De-icing Technologies · Surface Modification and Superhydrophobicity · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CAS Key Laboratory of Mechanical Behavior and Design of Materials, CAS Center for Excellence in Complex System Mechanics, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, China
Funding
Major Program of the National Science Foundation of China · Strategic Priority Research Program of the Chinese Academy of Sciences · National Natural Science Foundation of China
References (39)
Show source-provided references
1. Passive Snow Repulsion: A State-of-the-art Review Illuminating Research Gaps and Possibilities10.1016/j.egypro.2017.09.650 ↗
2. A review of in-flight detection and identification of aircraft icing and reconfigurable control10.1016/j.paerosci.2012.11.001 ↗
3. Review of ice-pavement adhesion study and development of hydrophobic surface in pavement deicing
4. A review of surface engineering issues critical to wind turbine performance10.1016/j.rser.2007.11.009 ↗
5. Wind turbines ice distribution and load response under icing conditions10.1016/j.renene.2017.05.059 ↗
6. Jha, P., Brillembourg, D., and Schmitz, S. (2012, January 9–12). Wind Turbines Under Atmospheric Icing Conditions—Ice Accretion Modeling, Aerodynamics, and Control Strategies for Mitigating Performance Degradation. Proceedings of the 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Nashville, TN, USA.10.2514/6.2012-1287 ↗
7. Predictions of ice formations on wind turbine blades and power production losses due to icing10.1002/we.2333 ↗
8. A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications10.1021/acs.iecr.7b04887 ↗
9. From superhydrophobicity to icephobicity: Forces and interaction analysis10.1038/srep02194 ↗
10. Preparation of superhydrophobic/superoleophilic copper coated titanium mesh with excellent ice-phobic and water-oil separation performance10.1016/j.apsusc.2019.01.117 ↗
11. Why Superhydrophobic Surfaces Are Not Always Icephobic10.1021/nn302138r ↗
12. Robust superhydrophobic surface on Al substrate with durability, corrosion resistance and ice-phobicity10.1038/srep20933 ↗
13. Superhydrophobic surfaces cannot reduce ice adhesion10.1063/1.4752436 ↗
14. Design of anti-icing surfaces: Smooth, textured or slippery?10.1038/natrevmats.2015.3 ↗
15. Understanding the role of hollow sub-surface structures in reducing ice adhesion strength10.1039/C9SM00024K ↗
16. Icephobic performance of one-step silicone-oil-infused slippery coatings: Effects of surface energy, oil and nanoparticle contents10.1016/j.jcis.2019.09.119 ↗
17. Bioinspired Multifunctional Anti-icing Hydrogel10.1016/j.matt.2019.12.017 ↗
18. Phase transition enabled durable anti-icing surfaces and its DIY design10.1016/j.cej.2018.11.224 ↗
19. Self-lubricating icephobic elastomer coating (SLIC) for ultralow ice adhesion with enhanced durability10.1016/j.coldregions.2018.01.005 ↗
20. Oil-Infused Superhydrophobic Silicone Material for Low Ice Adhesion with Long-Term Infusion Stability10.1021/acsami.6b11184 ↗
21. Facile preparation of a slippery oil-infused polymer surface for robust icephobicity10.1016/j.porgcoat.2020.105849 ↗
22. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity10.1038/nature10447 ↗
23. Designing durable icephobic surfaces10.1126/sciadv.1501496 ↗
24. Multiscale crack initiator promoted super-low ice adhesion surfaces10.1039/C7SM01511A ↗
25. Design and preparation of sandwich-like polydimethylsiloxane (PDMS) sponges with super-low ice adhesion10.1039/C8SM00820E ↗
26. Design and preparation of icephobic PDMS-based coatings by introducing an aqueous lubricating layer and macro-crack initiators at the ice-substrate interface10.1016/j.porgcoat.2020.105737 ↗
27. Recent progress in the anti-icing performance of slippery liquid-infused surfaces10.1016/j.porgcoat.2020.106096 ↗
28. Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance10.1021/acsami.0c06912 ↗
29. Intelligent Icephobic Surface toward Self-Deicing Capability10.1021/acssuschemeng.9b04570 ↗
30. Superhydrophobic photothermal icephobic surfaces based on candle soot10.1073/pnas.2001972117 ↗
31. Highly efficient solar anti-icing/deicing via a hierarchical structured surface10.1039/D0MH00636J ↗
32. Utilizing swelling force to decrease the ice adhesion strength10.1016/j.coldregions.2017.11.018 ↗
33. Disturbing stability of interface by adopting phase-change temperature gradient to reduce ice adhesion strength10.1016/j.coldregions.2018.11.010 ↗
34. Development and evaluation of poly(dimethylsiloxane) based composite coatings for icephobic applications10.1016/j.surfcoat.2018.06.066 ↗
35. A quick and accurate method to determine the Poisson’s ratio and the coefficient of thermal expansion of PDMS10.1039/C8SM02105H ↗
36. Chen, T. (2019). Research on Active Anti/De-Icing Method Based on Disturbing the Adhesion Stability of Ice-Solid Interface (In Chinese). [Ph.D. Thesis, Jilin University].
37. Adhesion of ice to a flexible substrate10.1007/BF02403112 ↗
38. Delamination of a rigid punch from an elastic substrate under normal and shear forces10.1016/j.jmps.2018.09.009 ↗
39. A Detailed Elastic Analysis of the Flat Punch (Tack) Test for Pressure-Sensitive Adhesives10.1002/1099-0488(20001101)38:21<2769::AID-POLB60>3.0.CO;2-J ↗