Effect of Ca Addition on Inclusions of Welding Heat-Affected Zone in Pressure Vessel Steels
Source abstract
Abstract
Pressure vessel steels are used in the manufacture of tanks for the storage of gases, chemical materials and oil. To meet the increasing production demands, high-wire-energy welding is widely used in the manufacture of pressure vessel steels. This means that the weldability of pressure vessel steels needs to be improved. Therefore, in order to reveal the microalloying effect of Ca in pressure vessel steel, this study took a commonly used pressure vessel steel as the research object, and three groups of experimental steels with different Ca mass fractions were prepared using vacuum metallurgy, controlled rolling and controlled cooling. Welding heat simulation technology was used to simulate the welding heat of experimental steel and the welding heat-affected zone (HAZ) was investigated. The inclusions of the welding HAZ in the experimental steels were observed by using a metallographic microscope and scanning electron microscope (SEM). The mechanism of intragranular acicular ferrite (IAF) nucleation induced by the inclusions containing Ca elements in the welding HAZ of pressure vessel steels was also discussed. The research results show that the addition of Ca increased the number density of effective inclusions in the welding HAZ of the experimental steel up to 535.60 pieces/mm2. The addition of the Ca element was beneficial for producing more pinning inclusions in the experimental steel welding HAZ under the experimental conditions, and the inclusions were mainly elliptical oxide complex inclusions of Ca-Si with a size of about 2 μm. Meanwhile, Al2O3 and MnS were precipitated. After the addition of Ca elements, Mn-poor regions appeared around the inclusions containing Ca in the welding HAZ. IAF nucleation was mainly induced by the local compositional change mechanism and supplemented by the stress–strain energy mechanism and inert interface energy mechanism. This study provides a valuable reference for optimizing the welding process of pressure vessel steels and is of great importance for understanding the IAF nucleation mechanism of Ca-containing inclusions in the welding HAZ of pressure vessel steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Liaoning Provincial Key Laboratory of Advanced Material Preparation Technology, Shenyang University, Shenyang 110044, China
School of Mechanical Engineering, Shenyang University, Shenyang 110044, China
Funding
Support Program for Liaoning Province Natural Science Foundation Project
References (39)
Show source-provided references
1. Factors that affect welding-induced residual stress and distortions in pressure vessel steels and their mitigation techniques: A review10.1115/1.4026564 ↗
2. Research on pulsed eddy current automatic detection technology for weld defects of pressure vessel cylinder10.1016/j.measurement.2021.109081 ↗
3. Master curve evaluation of ANP-5 steel using mini-CT specimens10.1016/j.prostr.2022.12.027 ↗
4. Development of microstructure and residual stress in electron beam welds in low alloy pressure vessel steels10.1016/j.matdes.2021.109924 ↗
5. The impacts of grain boundary on the scattering of intermetallics in friction-stir-welded AA6061-T610.1016/j.matlet.2021.130206 ↗
6. On the heterogeneous microstructure development in the welded joint of 12MnNiVR pressure vessel steel subjected to high heat input electrogas welding10.1016/j.jmst.2019.03.035 ↗
7. Liu, J., Wang, J., Hu, F., Fu, K., Zhang, Z., and Wu, Y. (2023). Effects of Ti/N Ratio on Coarse-Grain Heat-Affected Zone Microstructure Evolution and Low-Temperature Impact Toughness of High Heat Input Welding Steel. Coatings, 13.10.3390/coatings13081347 ↗
8. The influence of martensitic microstructure and oxide inclusions on the toughness of simulated reheated 10 wt% Ni steel weld metal multi-pass fusion zones10.1016/j.msea.2020.140336 ↗
9. Microstructure and mechanical properties of hybrid LasTIG welds of HSLA steel10.1016/j.procir.2018.08.019 ↗
10. Microstructure and mechanical properties of wire-fed arc-based directed energy deposition of high-strength steel after ultrasonic impact oxidation treatment10.1016/j.jmapro.2022.11.043 ↗
11. Precipitation behavior and mechanical properties of hot-rolled high strength Ti–Mo-bearing ferritic sheet steel: The great potential of nanometer-sized (Ti, Mo) C carbide10.1557/jmr.2016.154 ↗
12. Zhang, Y., Yang, J., Xu, L., Qiu, Y., Cheng, G., Yao, M., and Dong, J. (2019). The effect of Ca content on the formation behavior of inclusions in the heat affected zone of thick high-strength low-alloy steel plates after large heat input weldings. Metals, 9.10.3390/met9121328 ↗
13. The material flow and texture-weakening mechanism in double-sided friction stir welded Mg alloy10.1080/13621718.2022.2139451 ↗
14. Cleavage fracture initiation at M—A constituents in intercritically coarse-grained heat-affected zone of a HSLA steel10.1007/s11661-013-2110-3 ↗
15. Zhang, Y., Yang, J., Du, H., Zhang, Y., and Ma, H. (2022). Effect of Ca deoxidation on toughening of heat-affected zone in high-strength low-alloy steels after large-heat-input welding. Metals, 12.10.3390/met12111830 ↗
16. Phase evolution and mechanical properties of coarse-grained heat affected zone of a Cu-free high strength low alloy hull structure steel10.1016/j.msea.2018.02.008 ↗
17. Research on mechanism of nucleation of intra-granular ferrite in welding heat affected zone of magnesium treated high-grade pipeline steel
18. Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals10.1179/mst.1996.12.3.237 ↗
19. Formation of intragranular acicular ferrite grains in a Ti-containing low carbon steel10.2355/isijinternational.43.1111 ↗
20. In situ observation of the evolution of intragranular acicular ferrite at Mg-containing inclusions in 16Mn steel
21. On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels10.2355/isijinternational.49.1063 ↗
22. Relationship between crystallographic structure of the Ti2O3/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness10.1016/j.matchar.2015.06.001 ↗
23. Eeffect of magnesium treatment on inclusions and HAZ microstructure and properties of steel plate
24. Research on IAF nucleation behavior induced by Ce/Ce-Zr inclusion inhigh strength steel plate for shipbuilding
25. Behaviour of sulphide and Non-alumina-based oxide inclusions in Ca-treated high-carbon steel10.1007/s11663-020-01872-2 ↗
26. Effects of Mg-Zr combined treatment on characteristics of inclusions in FH40 ship building steel ingots
27. In Situ Observations of the Formation of Fine-Grained Mixed Microstructures of Acicular Ferrite and Bainite in the Simulated Coarse-Grained Heated-Affected Zone10.1002/srin.201200313 ↗
28. Acicular ferrite in carbon-manganese weld metals: An overview10.1007/BF01133327 ↗
29. Three-dimensional morphology of ferrite formed in association with inclusions in low-carbon steel10.1016/j.matchar.2004.04.004 ↗
30. Recent development in controlling the microstructure and properties of low alloy steel weld metals10.2355/isijinternational.35.1170 ↗
31. Effects of Ti–Al complex deoxidization inclusions on nucleation of intragranular acicular ferrite in C–Mn steel10.1002/srin.201500088 ↗
32. Inclusion formation and microstructure evolution in low alloy steel welds10.2355/isijinternational.42.1344 ↗
33. Ferrite nucleation at ceramic/austenite interfaces10.2355/isijinternational.36.1301 ↗
34. Austenite grain growth behaviors of La-microalloyed H13 steel and its effect on mechanical properties10.1007/s11661-020-05872-4 ↗
35. Modeling interfacial evolutions at atomistic scale in the process of titanium oxide inducing ferrite nucleation in steels10.1021/acs.cgd.1c01433 ↗
36. Study on the mechanism of AF nucleation induced by complex oxide inclusions after LF refining in oxide metallurgical steel10.1016/j.matchar.2023.113239 ↗
37. Influence of the thermodynamic parameters on the temper embrittlement of SA508 Gr. 4N Ni–Cr–Mo low alloy steel with variation of Ni, Cr and Mn contents10.1016/j.jnucmat.2012.02.032 ↗
38. The nature of acicular ferrite in HSLA steel weld metals10.1007/BF00540369 ↗
39. Effect of inclusion size on the nucleation of acicular ferrite in welds10.2355/isijinternational.40.1260 ↗