journal article·2024-10-11Open access

Numerical Investigation of Film Formation Characteristics and Mechanisms through Airless Spraying on Spherical Surfaces

Zhaojie Wu, Chuanshuo Wang, Guichun Yang, Shiming Chen, Jimiao Duan, Yan Chen

Coatings· Volume 14· Issue 10

Abstract

This paper focuses on key engineering issues, particularly the overall turbulent transport of paint spray and coating film distribution characteristics, in the process of airless spraying film formation. By deeply considering the geometric features of spherical surfaces and their impact on the near-wall region of the flow field, an airless spraying film formation model consisting of the Eulerian multiphase model, the realizable k–ε turbulence model, and the Eulerian Wall Film model was established. Through numerical simulations of static spraying on the inner and outer walls of spherical surfaces with different radii, the influence of geometric features on the spray flow field and film formation characteristics on spherical surfaces was investigated. Subsequently, based on numerical simulations of dynamic spraying on different nozzle trajectories, the film formation characteristics were analyzed, and the optimal spray trajectory planning method was determined. Additionally, this study examined the coating distribution characteristics during dynamic spraying on spherical surfaces with varying geometric dimensions. Finally, a kind of chlorinated rubber anti-corrosion primer was chosen to carry out spraying experiments, which validated that the airless spray coating model and the corresponding numerical simulation methods established in this paper were reasonable and feasible for investigating the film formation characteristics on spherical surfaces. This work is expected to further promote the application of airless spray techniques in machinery, automotive, shipbuilding, and aviation industries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Plant Surface Properties and Treatments · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Army Logistics Academy, Chongqing 401331, China

Jiangsu Key Laboratory of Oil-Gas & New-Energy and Transportation Technology, Changzhou University, Changzhou 213000, China

Funding

Science and Technology Research Program of Chongqing Municipal Education Commission · Graduate Research Innovation Program of Chongqing · Natural Science Foundation of Chongqing

References (24)

Show source-provided references
1. Chen, S., Chen, Y., Wu, Z., Jiang, J., Jiang, L., and Hua, W. (2022). A Hybrid Euler-Lagrange Model for the Paint Atomization Process of Air Spraying. Processes, 10.10.3390/pr10122513 ↗
2. Investigation of the Film Formation in Dynamic Air Spray Painting10.32604/fdmp.2024.053114 ↗
3. CFD simulation of paint deposition in an air spray process
4. A hybrid aerodynamic and electrostatic atomization system for enhanced uniformity of thin film10.1016/j.elstat.2017.04.006 ↗
5. Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting10.1016/j.ijheatfluidflow.2019.108499 ↗
6. Comparative Study on the Microstructure and Properties of 304 Stainless Steel Coatings Prepared by High-Velocity Oxygen Fuel Spraying and Air Plasma Spraying10.1007/s11666-024-01786-4 ↗
7. Wu, Z., Chen, Y., Liu, H., Hua, W., Duan, J., and Kong, L. (2023). A Review of the Developments of the Characteristics and Mechanisms of Airless Spraying on Complex Surfaces. Coatings, 13.10.3390/coatings13122095 ↗
8. Application of phase doppler anemometry in paint sprays
9. Ye, Q., Domnick, J., and Scheibe, A. (2002, January 2–5). Simulation of the Spray Coating Process Using a Pneumatic Atomizer. Proceedings of the ILASS-Europe, Zaragoza, Spain.
10. Modelling of particle flow in a dual circulation fluidized bed by a Eulerian-Lagrangian approach10.1016/j.ces.2018.08.008 ↗
11. Meso-Scale Drag Model Designed for Coarse-Grid Eulerian-Lagrangian Simulation of Gas-Solid Flows10.1016/j.ces.2020.115747 ↗
12. A deterministic and viable coalescence model for Euler–Lagrange simulations of turbulent microbubble-laden flows10.1016/j.ijmultiphaseflow.2017.10.009 ↗
13. Coarse graining Euler-Lagrange simulations of cohesive particle fluidization10.1016/j.powtec.2020.01.056 ↗
14. A computational analysis of local flow for reacting Diesel sprays by means of an Eulerian CFD model10.1016/j.ijmultiphaseflow.2017.10.010 ↗
15. Modelling of spray and combustion processes by using the Eulerian multiphase approach and detailed chemical kinetics10.1016/j.fuel.2016.11.051 ↗
16. Direct numerical simulations of suspension of disk-shaped particles10.1063/5.0200136 ↗
17. On the difficulty of determining Kármán “constants” from direct numerical simulations10.1063/5.0204662 ↗
18. Large Eddy Simulation of Vertical Structure and Size Density of Deep Layer Clouds10.1007/s00376-023-3134-2 ↗
19. Advances in Direct and Large-Eddy Simulations10.1007/s10494-023-00524-0 ↗
20. Evaluation of an efficient data-driven ANN model to predict agglomerate collisions within Euler–Lagrange simulations10.1016/j.compfluid.2023.106119 ↗
21. A comprehensive CFD investigation of tip vortex trajectory in shrouded wind turbines using compressible RANS solver10.1016/j.energy.2024.130929 ↗
22. Osman, H., Adamiak, K., Castle, G., Fan, H.T., and Simmer, J. (2015, January 13–19). Comparison Between the Numerical and Experimental Deposition Patterns for an Electrostatic Rotary Bell Sprayer. Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Houston, TX, USA.10.1115/IMECE2015-50211 ↗
23. Numerical study of particle deposition in electrostatic painting near a protrusion or indentation on a planar surface10.1016/j.elstat.2015.07.005 ↗
24. Wu, Z., Chen, Y., Chen, S., Duan, J., and Li, J. (2024). Research on Film Formation Characteristics by Spraying on Unidiameter Vertical Interpenetrating Cylindrical Surfaces. Coatings, 14.10.3390/coatings14070847 ↗