journal article·2025-10-04Open access

Microstructural Evolution of Cold-Rolled Type 347H Austenitic Heat-Resistant Steel

Yanmo Li, Xiangqian Liu, Minghui Zhang, Qiulong Li, Long Niu, Zhihua Wang, Zhe Xu, Wei Wang, Peiyue Li, Bin Chen, Chenxi Liu, Zhihua Sun

Coatings· Volume 15· Issue 10

Abstract

The influence of cold rolling deformation degree (15%, 30%, 45%, 60%, 75%, and 90%) on the microstructural evolution and the mechanical properties of type 347H austenitic heat-resistant steel was investigated using optical microscopy, X-ray diffraction, magnetic hysteresis loop measurement, transmission electron microscopy, and a hardness test. Two types of martensite formed in the deformed specimens, as thin ε-martensite in the cold-rolled steels when the deformation degree was less than 60%, and α′-martensite in the heavily cold-rolled steels when the deformation degree ranged from 60% to 90%. Furthermore, the amount of α′-martensite increases rapidly with the increase in the cold rolling deformation degree. Hence, 60% is considered as the critical point of cold rolling reduction for the formation of α′-martensite. If the specimen experienced a cold rolling reduction of 90%, ε-martensite was hardly observed, while the volume faction of the α′-martensite amounts to 25%. It is verified by the TEM observations that the α′-martensite is transformed from the austenitic matrix as well as the preformed ε-martensite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Luoyang Ship Materials Research Institute, Luoyang 471000, China

State Key Lab of Hydraulic Engineering Simulation and Safety, School of Materials Science & Engineering, Tianjin University, Tianjin 300354, China

School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China

Funding

China National Funds for Distinguished Young Scientists · National Natural Science Foundation of China · National High Technology Research and Development Program of China

References (27)

Show source-provided references
1. Precipitation and properties at elevated temperature in austenitic heat-resistant steels—A review10.1002/srin.202000378 ↗
2. Microstructure and Corrosion Resistance of Dissimilar Weld-Joints between Duplex Stainless Steel 2205 and Austenitic Stainless Steel 316L10.1016/j.jmst.2015.11.021 ↗
3. Processing maps and microstructural evolution of the type 347H austenitic heat-resistant stainless steel10.1557/jmr.2015.168 ↗
4. Coarsening Behavior of MX Carbonitrides in Type 347H Heat-Resistant Austenitic Steel during Thermal Aging10.1007/s12613-016-1237-9 ↗
5. Atomic-scale investigation of the mechanisms of deformation-induced martensitic transformation at ultra-cryogenic temperatures10.1016/j.jmst.2024.04.067 ↗
6. Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting10.1016/j.jmst.2016.06.016 ↗
7. Atomic simulation study of the factors affecting nucleation in deformation-induced martensitic transformation in grains and at grain boundaries in pure iron10.1016/j.actamat.2023.119629 ↗
8. Reverse Transformation Mechanism of Martensite to Austenite in a Metastable Austenitic Alloy10.1016/j.msea.2009.02.010 ↗
9. Effect of Cold Rolling on Recrystallization and Tensile Behavior of a High-Mn Steel10.1016/j.matchar.2015.12.021 ↗
10. Magnetic Properties and A′ Martensite Quantification in an AISI 301LN Stainless Steel Deformed by Cold Rolling10.1016/j.matchar.2007.07.007 ↗
11. Elucidating the contribution of deformation-induced martensitic transformation and deformation twinning to dynamic strain aging in Fe-Cr-Ni metastable austenitic stainless steel10.1016/j.matchar.2025.115204 ↗
12. Effect of Large Strain Cold Rolling and Subsequent Annealing on Microstructure and Mechanical Properties of an Austenitic Stainless Steel10.1016/j.msea.2012.02.101 ↗
13. Deformation-induced martensitic transformations: A strategy forovercoming the strength-ductility trade-off in high-entropy alloys10.1016/j.cossms.2024.101177 ↗
14. Morphologies and Characteristics of Deformation Induced Martensite during Tensile Deformation of 304 LN Stainless Steel10.1016/j.msea.2007.09.005 ↗
15. Decoupling the orientation dependence of deformation-induced martensitic transformation via single-crystal micropillar compression10.1016/j.jmst.2025.04.034 ↗
16. The Influence of Grain Size on the Strain-Induced Martensite Formation in Tensile Straining of an Austenitic 15Cr–9Mn–Ni–Cu Stainless Steel10.1016/j.msea.2013.04.107 ↗
17. Precipitation and Hot Deformation Behavior of Austenitic Heat-Resistant Steels: A Review10.1016/j.jmst.2017.01.025 ↗
18. Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys10.1016/j.actamat.2024.120354 ↗
19. Phase Quantification in Nanobainite via Magnetic Measurements and X-Ray Diffraction10.1016/j.jmmm.2014.11.037 ↗
20. Effect of Copper on the Formation of Strain-Induced Martensite in Two Austenitic Stainless Steels AISI 30410.1016/j.msea.2014.10.059 ↗
21. Strain-Induced ε-Martensite Transformation during Nanoindentation of High-Nitrogen Steel10.1016/j.msea.2014.01.030 ↗
22. Precipitation behavior of type 347H heat-resistant austenitic steel during long-term high-temperature aging10.1557/jmr.2015.343 ↗
23. Structural/Textural Changes and Strengthening of an Advanced High-Mn Steel Subjected to Cold Rolling10.1016/j.msea.2015.11.027 ↗
24. Measurement of Volume Fraction of ε Martensite in Fe–Mn Based Alloys10.1016/j.msea.2003.10.371 ↗
25. Stacking Fault Energies of Seven Commercial Austenitic Stainless Steels10.1007/BF02641927 ↗
26. The Effect of Cold Rolling Regime on Microstructure and Mechanical Properties of AISI 304L Stainless Steel10.1016/j.jmatprotec.2010.02.010 ↗
27. Formation of Epsilon Martensite by High-Pressure Torsion in a TRIP Steel10.1016/j.msea.2014.11.091 ↗