Show source-provided references
1. Controlling simonkolleite crystallisation via metallic Zn oxidation in a betaine hydrochloride solution
10.1039/D3NA00108C ↗3. Microwave-assisted synthesis of simonkolleite nanoplatelets on nickel foam–graphene with enhanced surface area for high-performance supercapacitors
10.1016/j.jcis.2015.09.033 ↗5. Mesoporous simonkolleite—TiO2 nanostructured composite for simultaneous photocatalytic hydrogen production and dye decontamination
10.1016/j.psep.2014.12.001 ↗8. Optimisation of mechanical and tribological properties of thermally sprayed ceramic coatings: An investigation of innovative in-situ doping strategies with carbon and resin
10.1016/j.apsusc.2025.163621 ↗10. UV-curable self-healing, high hardness and transparent polyurethane acrylate coating based on dynamic bonds and modified nano-silica
10.1016/j.porgcoat.2022.107051 ↗11. The influence of residual stress on the properties and performance of thick TiAlN multilayer coating during dry turning of compacted graphite iron
10.1016/j.wear.2020.203342 ↗12. Li, N., Wang, H., Liu, Q., Hao, Z., Xu, D., Chen, X., Cui, D., Xu, L., and Feng, Y. (2025). Review of Preparation and Key Functional Properties of Micro-Arc Oxidation Coatings on Various Metal Substrates. Coatings, 15.
10.20944/preprints202509.1363.v1 ↗13. A review on the mechanical properties for thin film and block structure characterised by using nanoscratch test
10.1515/ntrev-2019-0055 ↗15. Robakowska, M., Gierz, Ł., Mayer, P., Szcześniak, K., Marcinkowska, A., Lewandowska, A., and Gajewski, P. (2022). Influence of the addition of sialon and aluminum nitride fillers on the photocuring process of polymer coatings. Coatings, 12.
10.3390/coatings12101389 ↗16. The effect of filler type (tungsten carbide, zinc oxide) and content on the mechanical and wear behavior of jute/flax reinforced epoxy hybrid composites: Experimental and artificial neural network analysis
10.1002/pc.29879 ↗19. Mechanical properties of natural fiber reinforced natural and ceramic fillers for various engineering applications
10.1007/s10751-024-02109-3 ↗20. A comprehensive review on cellulose, chitin, and starch as fillers in natural rubber biocomposites
21. Effect of filler and sonication time on the performance of brown alga (Sargassum plagiophyllum) filled cassava starch biocomposites
10.1016/j.algal.2021.102321 ↗23. Development of Sargassum spp. ash as filler material on cement composites with low carbon dioxide production
10.1680/jmacr.24.00325 ↗24. Compatibility study of sargassum-based aggregate in Portland cement-based cementitious matrix
25. Lyra, G.P., Colombo, A.L., Duran, A.J.F.P., Parente, I.M.S., Bueno, C., and Rossignolo, J.A. (2024). The use of Sargassum spp. ashes as a raw material for mortar production: Composite performance and environmental outlook. Materials, 17.
10.20944/preprints202402.1630.v1 ↗26. Bauta, J., Vaca-Medina, G., Raynaud, C.D., Simon, V., Vandenbossche, V., and Rouilly, A. (2024). Development of a binderless particleboard from brown seaweed Sargassum spp.. Materials, 17.
10.3390/ma17030539 ↗27. Studies on the influence of alginate as a natural polymer in mechanical and long-lasting properties of concrete—A review
10.1016/j.matpr.2022.03.424 ↗29. López-Sosa, L.B., Alvarado-Flores, J.J., Corral-Huacuz, J.C., Aguilera-Mandujano, A., Rodríguez-Martínez, R.E., Guevara-Martínez, S.J., Alcaraz-Vera, J.V., Rutiaga-Quiñones, J.G., Zárate-Medina, J., and Ávalos-Rodríguez, M.L. (2020). A prospective study of the exploitation of pelagic Sargassum spp. as a solid biofuel energy source. Appl. Sci., 10.
10.3390/app10238706 ↗30. In vitro biocompatibility and antimicrobial activities of zinc oxide nanoparticles (ZnO NPs) prepared by chemical and green synthetic route—A comparative study
10.1007/s12668-019-00698-w ↗31. Green synthesis and characterization of zinc oxide nanoparticles using bashful (Mimosa pudica) leaf extract: A precursor for organic electronics applications
33. Sorption mechanism, hygroscopic agents, and application of passive water evaporative cooling technology—A review
10.1016/j.ctta.2025.100166 ↗34. Comparative study on compressive strength of coated particles prepared in a Wurster fluidized bed using different coating materials
10.1016/j.powtec.2025.120928 ↗