journal article·2026-01-12Open access

The Effect of Micro-Cutting on the Residual Height of Surface Topography in NiTi Shape Memory Alloy Using a Small-Diameter Cutter

Xinyi Wang, Zeming Li, Yansen Wang, Zelin Wang, Zhenshan Chen, Junxiang Liu, Jian Wang, Guijie Wang

Coatings· Volume 16· Issue 1

Abstract

The milled surface topography of NiTi SMA critically affects its frictional behavior, corrosion resistance, and biocompatibility, which are essential for biomedical and aerospace applications. This study combines simulation and single-factor experiments to investigate the coupling behavior among surface topography evolution, work hardening, plastic deformation, and residual stress evolution. Results showed that increasing feed per tooth led to a significant rise in surface residual height and an improvement in surface isotropy. With the increase in feed per tooth, the error between the experimental and simulated heights gradually decreased from 105.6% to 30.9%, indicating that both material properties and feed per tooth strongly affect residual profile formation in the feed direction. In addition, larger feed per tooth intensifies work hardening and plastic deformation but reduces surface residual stress, thereby increasing microhardness. These effects can mitigate material rebound and improve surface profile accuracy. The results provide a direct basis for controlling the surface integrity of NiTi SMA components through machining parameter optimization, enabling precise tailoring of functional surface characteristics, such as wear performance, chemical stability, and biological response, which is of critical importance for high-end biomedical implants and aerospace systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Nonlocal and gradient elasticity in micro/nano structures · Temporomandibular Joint Disorders

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China

Shandong Key Laboratory of Collaborative Mining Technology for Intelligent Mine Equipment, Shandong University of Science and Technology, Qingdao 266590, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Shandong Province of China · Open Fund of Shandong Key Laboratory of Advanced Engine Piston Assembly · Open Fund of Shandong Key Laboratory of CNC Machine Tool Functional Components

References (27)

Show source-provided references
1. Advances in enhancing structural and functional fatigue resistance of superelastic NiTi shape memory alloy: A Review10.1177/1045389X211023582 ↗
2. Nespoli, A., Passaretti, F., Szentmiklósi, L., Maróti, B., Placidi, E., Cassetta, M., Yada, R.Y., Farrar, D.H., and Tian, K.V. (2022). Biomedical NiTi and β-Ti alloys: From composition, microstructure and thermo-mechanics to application. Metals, 12.10.3390/met12030406 ↗
3. Sapmaz, Y., Dilibal, S., Yilmaz, O., and Sapmaz, A.R. (2021, January 11–13). Nickel-titanium SMA springs actuated bioinspired soft robot for pipeline inspections. Proceedings of the 2021 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA), Ankara, Turkey.10.1109/HORA52670.2021.9461361 ↗
4. Comparison of tool wear, surface morphology, specific cutting energy and cutting temperature in machining of titanium alloys under hybrid and green cooling strategies10.1007/s40684-023-00512-9 ↗
5. Zhang, X., Yu, T., Xu, P., and Zhao, J. (2022). An intelligent sustainability evaluation system of micro milling. Robot. Comput.-Integr. Manuf., 73.10.1016/j.rcim.2021.102239 ↗
6. Kuntoğlu, M., Gupta, K.M., Aslan, A., Salur, E., and Garcia-Collado, A. (2022). Influence of tool hardness on tool wear, surface roughness and acoustic emissions during turning of AISI 1050. Surf. Topogr. Metrol. Prop., 10.10.1088/2051-672X/ac4f38 ↗
7. Sousa, C.F.V., and Silva, G.J.F. (2020). Recent advances on coated milling tool technology—A comprehensive review. Coatings, 10.10.3390/coatings10030235 ↗
8. Surface integrity of NiTi shape memory alloy in milling with cryogenic heat treated cutting tools under different cutting conditions10.1007/s11665-021-06095-3 ↗
9. Machinability of nickel-titanium shape memory alloys under dry and chilled air cutting conditions10.1007/s00170-023-11373-6 ↗
10. Wang, H., Wang, B., Liu, Z., Li, Y., Zhang, R., and Zhao, J. (2024). Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process. Tribol. Int., 195.10.1016/j.triboint.2024.109608 ↗
11. A review on high speed micro-milling of shape memory alloy (NiTinol): Process and post perspective
12. Sheheryar, M., Khan, M.A., Jaffery, S.H.I., Alruqi, M., Khan, R., Bashir, M.N., and Petru, J. (2022). Multi-objective optimization of process parameters during micro-milling of nickel-based alloy inconel 718 using taguchi-grey relation integrated approach. Materials, 15.10.3390/ma15238296 ↗
13. Feasibility study on ultraprecision micro-milling of the additively manufactured NiTi alloy for generating microstructure arrays10.1016/j.jmrt.2023.05.214 ↗
14. Analysis of dimensional accuracy for micro-milled areal material measures with kinematic simulation10.1007/s00170-021-07629-8 ↗
15. Precision micro-milling process: State of the art10.1007/s40436-020-00323-0 ↗
16. Digital twin modeling method based on biomimicry for machining aerospace components10.1016/j.jmsy.2020.04.014 ↗
17. Single and multi-objective optimization for cutting force and surface roughness in peripheral milling of Ti6Al4V using fixed and variable helix angle tools10.1016/j.jmapro.2022.06.016 ↗
18. Wang, B., Liu, Z., and Sun, J. (2024). Characterization and correlation analysis of surface topography in ball-end milling. Surf. Topogr. Metrol. Prop., 12.10.1088/2051-672X/ad8a76 ↗
19. Sun, Q., Zhou, J., and Li, P. (2022). Simulations and experiments on the micro-milling process of a thin-walled structure of Al6061-T6. Materials, 15.10.3390/ma15103568 ↗
20. Chip formation and phase transformation in orthogonal machining of NiTi shape memory alloy: Microstructure-based modelling and experimental validation10.1016/j.cirp.2020.04.025 ↗
21. An experimental analysis of minimum chip thickness in micro-milling of two different titanium alloys10.1177/0954405420933098 ↗
22. Zhuo, Y., Han, Z., An, D., and Jin, H. (2021). Surface topography prediction in peripheral milling of thin-walled parts considering cutting vibration and material removal effect. Int. J. Mech. Sci., 211.10.1016/j.ijmecsci.2021.106797 ↗
23. Finite element simulation of surface residual stress in micro-milling Inconel 718
24. Nonlinear deformation mechanism of Ni50. 8Ti shape memory alloy at different temperatures and strain rates10.1007/s11665-023-08562-5 ↗
25. Study on Surface Integrity in milling of TC11 Titanium Impellers
26. Kowalczyk, M., and Tomczyk, K. (2024). Quality of machined surface and cutting force when milling NiTi alloys. Materials, 17.10.3390/ma17246122 ↗
27. Bertolini, R., Tucci, F., Ghiotti, A., Jawahir, I.S., and Bruschi, S. (2025). Analysis of tool wear and surface integrity in turning wrought and additively manufactured Ni50. 8Ti49. 2 shape memory alloys. Wear, 570.10.1016/j.wear.2025.205890 ↗