A Comparative Study of Microstructure and Tribological Properties of Electroless Ni-P, Ni-W-P, and Ni-Ce-P Coatings on 6061 Aluminum Alloy: The Role of Heat Treatment
Source abstract
Abstract
This study conducts a systematic comparison of binary Ni-P, ternary Ni-W-P, and ternary Ni-Ce-P electroless coatings on 6061-T6 aluminum alloy, focusing on the effects of post-plating heat treatment at 300, 350, and 400 °C. The originality of this work lies in its direct comparison of W and Ce doping under identical conditions and its identification of a critical brittle transition that decouples hardness from wear resistance. All coatings achieved peak hardness at 350 °C, with Ni-W-P reaching approximately 1691 ± 45 HV0.1 due to Ni3P precipitation and solid-solution strengthening. However, a key finding is the severe embrittlement of the Ni-P coating at 300 °C, where its wear rate increased by over 50 times despite a hardness increase. Treatment at 400 °C degraded wear performance across all systems, likely due to precipitate coarsening and substrate over-aging. The best overall performance within the tested window was achieved with the Ni-Ce-P coating heat-treated at 350 °C for 1 h, which exhibited a fine nodular structure and reduced the wear rate by 98.9% compared to the bare substrate. These results highlight the importance of balancing hardness and toughness, identifying an optimized processing window for enhancing the tribological performance of lightweight aluminum components.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Innovation and Entrepreneurship College, Xi’an Traffic Engineering University, Xi’an 710306, China
Funding
Scientific Research Program Funded by the Education Department of Shaanxi Provincial Government
References (22)
Show source-provided references
1. Effects of heat treatment on the corrosion behavior and mechanical properties of aluminum alloy 202410.1016/j.jmrt.2023.05.278 ↗
2. Zhu, D. (2024). Effects of Activation Methods on the Preparation and Properties of High-Phosphorus Ni-P Coatings via Chemical Deposition on Aluminum Alloy Surfaces. [Master’s Thesis, Changchun University of Technology].
3. Nickel electroplating of 6061-T6 aluminum alloy using anodizing process as the pretreatment10.1016/j.jmrt.2023.10.285 ↗
4. Anticorrosion performance of TiN coating with electroless nickel-phosphorus interlayer on Al 6061 alloy10.1016/j.matchemphys.2022.127170 ↗
5. Effect of heat treatment on the microstructure and corrosion performance of 2219 Al alloy cold sprayed coatings10.1016/j.corsci.2024.112526 ↗
6. Microstructure and wear-resistant behaviors of Al2O3-TiO2 reinforced Ni-based composite coating plasma-sprayed on 6061 aluminum alloy10.1016/j.surfcoat.2024.131032 ↗
7. Evaluation of microstructural effects on corrosion behavior of AZ31B magnesium alloy with a MAO coating and electroless Ni-P plating10.1016/j.jmrt.2020.09.099 ↗
8. Mihoob, M.M., Albarody, T.M.B., Ahmad, F., and Alnarabiji, M.S. (2023). Optimizing the Thermal Spray Parameters for Producing High-Performance Mo/ZrB2 Metal Matrix Composites Using the Taguchi Method. Coatings, 13.10.3390/coatings13091620 ↗
9. Development of electroless Ni-P/nano-WC composite coatings and investigation on its properties10.1016/j.surfcoat.2015.07.011 ↗
10. Corrosion and Wear Characteristics of Electroless Ni-P, Ni-P-W and Composite Ni-P-W/Al2O3 Coatings on AZ91 Sheet10.1007/s12540-018-0199-z ↗
11. Gao, J., Cui, K.F., Li, S.Q., Zhong, L., Dai, J.X., Yang, Z.G., and Qiang, R.M. (2024). A New Process of Chemical Plating Ni-P Electromagnetic Induction Heating Activation on the Surface of Aluminium Alloy Base Material. Coatings, 14.10.3390/coatings14091221 ↗
12. High corrosion and wear resistant electroless Ni-P gradient coatings on aviation aluminum alloy parts10.1007/s12613-023-2689-3 ↗
13. Tailoring electroless Ni-W-P polyalloy coatings: Unveiling the synergistic impact of cerium addition and annealing on surface functional properties10.1016/j.surfcoat.2024.130874 ↗
14. Ren, L., Cheng, Y.H., Yang, J.Y., and Wang, Q.G. (2020). Study on Heat Transfer Performance and Anti-Fouling Mechanism of Ternary Ni-W-P Coating. Appl. Sci., 10.10.3390/app10113905 ↗
15. Mechanical Properties and Electrochemical Behavior of Electroless Ni-P-AlN Nanocomposite Coating10.1007/s12540-021-00994-9 ↗
16. Investigation of the tribological behavior of electroless Ni-W-P coating pre and post phase transformation regime10.1088/2053-1591/ab33bd ↗
17. Phase transformation behavior of nanocrystalline Ni-W-P alloys containing various W and P contents10.1016/j.surfcoat.2011.11.024 ↗
18. Microstructure analysis of element W in improving the Ni-P deposit thermal stability10.1016/j.jmrt.2020.03.073 ↗
19. Ni-P-TiO2 nanocomposite coatings with uniformly dispersed Ni3Ti intermetallics: Effects of current density and post heat treatment10.1016/j.surfcoat.2019.05.058 ↗
20. Tribological Behaviors of Electroless Nickel-Boron Coating on Titanium Alloy Surface10.1186/s10033-024-00990-1 ↗
21. Effect of vacuum and air heat treatments on the properties of the electroless Ni-P coating on magnesium alloy10.1088/2053-1591/ade11b ↗
22. Tribological characterization of heat-treated Ni-P and Ni-P-Al2O3 composite coatings by reciprocating sliding tests