journal article·2026-02-18Open access

Rheology-Driven Quantification and Mechanistic Insight into Binder-Filler Interactions in Asphalt Mastics Incorporating Raw and Calcined Oyster Shell Powders

Ruihai Wang, Xiang Liu, Yudong Dang, Xiaolong Li, Jie Chen

Coatings· Volume 16· Issue 2

Abstract

Waste oyster shell powder (OP) and calcined oyster shell powder (COP) were used as bio-fillers in asphalt mastics. Limestone powder (LP) served as the control. This study employed rheological theory to quantify filler–asphalt interactions. Dynamic shear rheometry (DSR), Black diagrams, and master curves were analyzed to determine critical volume fraction (φcrit), interaction parameter (C), and complex viscosity increment (∆η*). Results indicate that OP mastics exhibit the lowest φcrit (0.510) and highest C value (1.133), demonstrating the strongest interfacial interaction. COP shows intermediate interaction strength (φcrit = 0.542), yet both OP and COP outperform LP (φcrit = 0.617) in high-temperature deformation resistance within the 0.23–0.53 filler volume fraction range, evidenced by superior complex shear modulus (G*) master curves and pronounced ∆η* increases. Grey relational analysis identifies specific surface area and CaCO3 content as governing factors. Optical microscopy and FTIR confirm that filler–asphalt interactions are dominated by physical adsorption without chemical bond formation. These findings elucidate the performance advantages of both raw and calcined oyster shell powders and provide a theoretical basis for their application as sustainable high-performance bio-fillers in asphalt pavements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Transportation Engineering, Kunming University of Science and Technology, Kunming 650500, China

Yunnan Science & Technology Research Institute of Highway, Kunming 650051, China

Yunnan Key Laboratory of Building Structure and New Materials, Yunnan Institute of Building Research Co., Ltd., Kunming 650223, China

Yunnan Digital Technology Innovation Centre of Modern Integrated Transportation, Kunming 650051, China

Yunnan Construction Infrastructure Investment Co., Ltd., Kunming 650501, China

Funding

Yunnan Fundamental Research Projects · Yunnan Provincial Department of Transportation Technology Innovation and Demonstration Project · Yunnan Digital Technology Innovation Centre of Modern Integrated Transportation · the Scientific Research and Development Project of China Communications Construction Company Ltd. · Yunnan Innovation Team of Vehicle-Road Cooperative Control and Operation Safety · Fundamental Research Funds for the Central Universities, CHD

References (63)

Show source-provided references
1. Wang, S., Wang, Z., Yu, A., Yu, H., He, Z., Meng, X., Gong, Z., Guan, D., and Zhang, F. (2025). Characterizing the Interaction Between Asphalt and Mineral Fillers in Hot Mix Asphalt Mixtures: A Micromechanical Approach. Appl. Sci., 15.10.3390/app15052735 ↗
2. Mechanically activated shell powder modified asphalt and its aging resistance enhancement
3. Micromechanics approach to calculate the adsorbed asphalt film thickness on mineral fillers and evaluate physiochemical interactions10.1080/10298436.2024.2303670 ↗
4. Influence of mineral filler characteristics on the filler–asphalt interfacial behavior10.1016/j.apt.2024.104636 ↗
5. A review of asphalt-filler interaction: Mechanisms, evaluation methods, and influencing factors10.1016/j.conbuildmat.2021.124279 ↗
6. Nciri, N., Shin, T., Lee, H., and Cho, N. (2018). Potential of Waste Oyster Shells as a Novel Biofiller for Hot-Mix Asphalt. Appl. Sci., 8.10.3390/app8030415 ↗
7. Utilization of molybdenum tailings as an alternative mineral filler in asphalt mastic: Rheological performance and environmental aspects
8. Novel Sustainable Pavement Material: Recycling of Waste Shells as the Filler of Asphalt Mastic10.1021/acssuschemeng.4c01179 ↗
9. Kowalski, K., Król, J., Bańkowski, W., Radziszewski, P., and Sarnowski, M. (2017). Thermal and Fatigue Evaluation of Asphalt Mixtures Containing RAP Treated with a Bio-Agent. Appl. Sci., 7.10.3390/app7030216 ↗
10. Król, J., Niczke, Ł., and Kowalski, K. (2017). Towards Understanding the Polymerization Process in Bitumen Bio-Fluxes. Materials, 10.10.3390/ma10091058 ↗
11. Self-sensing capabilities in steel fiber-reinforced concrete for shrinkage resistance and structural health monitoring10.1038/s41598-025-30185-0 ↗
12. Potential of recycled fine aggregates powder as filler in asphalt mixture10.1016/j.conbuildmat.2011.04.022 ↗
13. Performance analysis and prediction of asphalt pavement containing municipal solid waste incineration bottom ash aggregate based on MEPDG10.1038/s41598-025-91686-6 ↗
14. Study on the effect of limestone replacement by steel slag on the interface interaction between asphalt and aggregate10.1016/j.conbuildmat.2025.140709 ↗
15. Ni, N., Tang, J., Li, M., Zhang, L., and Yuan, H. (2024). Study of the Rheological Properties of Rubberized Asphalt Mortar: Mechanisms of Action of Rubber Powder and Filler–Binder Ratio. Buildings, 15.10.3390/buildings15010107 ↗
16. Effect of various aging conditions and treatment methods on thermal degradation of coffee waste/epoxy composites10.1016/j.indcrop.2024.119115 ↗
17. Fan, G., Liu, H., Liu, C., Xue, Y., Ju, Z., Ding, S., Zhang, Y., and Li, Y. (2022). Analysis of the Influence of Waste Seashell as Modified Materials on Asphalt Pavement Performance. Materials, 15.10.3390/ma15196788 ↗
18. Potential application of waste bivalve shells as recycled filler in porous asphalt concrete through rheo-mechanical analysis10.1016/j.resconrec.2024.107830 ↗
19. Experimental investigation of seashells used as filler in hot mix asphalt10.1080/10298436.2014.943132 ↗
20. Improvements on high-temperature stability, rheology, and stiffness of asphalt binder modified with waste crayfish shell powder10.1016/j.jclepro.2020.121745 ↗
21. Preliminary study on the application of waste bivalve shells as biofiller for the production of asphalt concrete10.1016/j.clet.2024.100743 ↗
22. Comprehensive quality evaluation for oysters of geographical indication from Rushan in China: Characteristic profile of nutrition and flavor components10.1016/j.fochx.2025.102320 ↗
23. Study on the effect and mechanism of oyster shell powder on asphalt10.1080/10298436.2023.2176496 ↗
24. Study on fire resistance and mechanical properties of modified recycled waste oyster powder in asphalt binder10.1002/app.55504 ↗
25. Influence of the usage of waste oyster shell powder on mechanical properties and durability of mortar10.1016/j.apt.2022.103503 ↗
26. Sustainable mixtures using waste oyster shell powder and slag instead of cement: Performance and multi-objective optimization design10.1016/j.conbuildmat.2022.128642 ↗
27. Zhou, B. (2023). Study on Pavement Performance of Asphalt Mixture Based on Oyster Shell Solid Waste Utilization. [Master’s Thesis, Chongqing Jiaotong University].
28. Effect of seashell powder on the road performance of asphalt and asphalt mixture
29. A novel environmentally-friendly filler of the asphalt mastic: Organic modified waste shells10.1016/j.jclepro.2024.143333 ↗
30. Effect of filler on thermodynamic and mechanical behaviour of asphalt mastic: A MD simulation study10.1080/10298436.2018.1535120 ↗
31. Interfacial thickness and interaction between asphalt and mineral fillers10.1617/s11527-013-0083-8 ↗
32. Laboratory evaluation of the effect of rejuvenators on the interface performance of rejuvenated SBS modified bitumen mixture by surface free energy method10.1016/j.conbuildmat.2020.121866 ↗
33. Evaluation of adhesive properties of mineral-bitumen interfaces in cold asphalt mixtures10.1016/j.conbuildmat.2016.08.155 ↗
34. Adhesion characteristics of montmorillonite modified asphalt unveiled by surface free energy and AFM10.1016/j.ijadhadh.2024.103699 ↗
35. Evaluation indices of interaction ability of asphalt and aggregate based on rheological characteristics10.1007/s11595-012-0585-1 ↗
36. The interfacial interaction between asphalt binder and mineral filler: A comprehensive review on mechanisms, evaluation methods and influence factors10.1080/10298436.2021.1942468 ↗
37. Modelling of Asphalt Mastic in Terms of Filler-Bitumen Interaction10.1080/14680629.2010.9690335 ↗
38. (2025). Standard Test Methods of Asphalt and Asphalt Mixtures for Highway Engineering (Standard No. JTG 3410-2025).
39. (2004). Technical Specifications for Construction of Highway Asphalt Pavements (Standard No. JTG F40-2004).
40. (2024). Test Methods of Aggregate for Highway Engineering (Standard No. JTG 3432-2024).
41. Role of mineral filler in asphalt mixture10.1080/14680629.2020.1826351 ↗
42. Xiaoyan, M. (2019). Study on Asphalt-Filler Interaction and Prediction of Asphalt Mastic Performance. [Doctoral Thesis, Chang’an University].
43. Black curves and creep behaviour of crumb rubber modified binders containing warm mix asphalt additives10.1007/s11043-016-9300-5 ↗
44. (2023). Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Standard No. AASHTO T 350-2019).
45. Extending the Black diagram of bitumen to three dimensions10.1016/j.conbuildmat.2022.128727 ↗
46. Analysis of thermal susceptibility and rheological properties of asphalt binder modified with microwave activated crumb rubber10.1016/j.jclepro.2022.134488 ↗
47. Wang, C. (2015). Rheological Characterization on Paving Performance of Asphalt Binder. [Doctoral Thesis, Beijing University of Technology].
48. Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen10.1016/j.conbuildmat.2019.06.081 ↗
49. Taylor, R. (2007). Surface Interactions Between Bitumen and Mineral Fillers and Their Effects on the Rheology of Bitumen-Filler Mastics. [Doctoral Thesis, University of Nottingha].10.1201/9780203881200.ch42 ↗
50. Effect of Asphalt Binder Characteristics on Filler–Asphalt Interactions and Asphalt Mastic Creep Properties10.1061/(ASCE)MT.1943-5533.0002773 ↗
51. Improvement of evaluation indicator of interfacial interaction between asphalt binder and mineral fillers10.1016/j.conbuildmat.2017.05.003 ↗
52. Determination of interfacial tension of polymer melts by dynamic shear measurements10.1016/0166-6622(91)80085-3 ↗
53. Modulus reinforcement in elastomer composites. I. Inorganic fillers10.1002/app.1973.070170410 ↗
54. Guo, Y., Wang, X., Ji, G., Zhang, Y., Su, H., and Luo, Y. (2021). Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt. Sustainability, 13.10.3390/su131810271 ↗
55. Insights into the micro-modification mechanism, thermal stability, and rheological property of SBS/TB rubber crumb modified asphalt binder10.1016/j.conbuildmat.2025.141670 ↗
56. Rheological properties and effects of aging on acrylated epoxidised soybean oil monomer-modified asphalt binder10.1080/14680629.2018.1491883 ↗
57. Effect of blending protocol on the performance of SBS/sulfur/soybean-derived additive composite modified hard asphalt10.1080/10298436.2019.1698741 ↗
58. Study of the effect of filler on the fatigue behaviour of bitumen-filler mastics under DSR testing10.1016/j.conbuildmat.2017.08.066 ↗
59. Comparison of different blending combinations of virgin and RAP-extracted binder: Rheological simulations and statistical analysis10.1016/j.conbuildmat.2018.11.217 ↗
60. Understanding the temperature and loading frequency effects on physicochemical interaction ability between mineral filler and asphalt binder using molecular dynamic simulation and rheological experiments10.1016/j.conbuildmat.2020.118311 ↗
61. Interaction between asphalt and mineral fillers and its correlation to mastics’ viscoelasticity10.1080/10298436.2019.1575379 ↗
62. Yu, A. (2023). Study on Interaction of Asphalt and Filler and the Microscopic Influence Mechanism. [Master’s Thesis, Dalian Maritime University].
63. Calcination characteristics of oyster shells and their comparison with limestone from the perspective of waste recycling10.1007/s10163-019-00860-2 ↗