journal article·2026-05-04Open access

Effect of Metal Elements (Ta, Nb, V and Co) on the Mechanical Properties of Ti-Based Amorphous Composites

Xinhua Huang, Bin Chen, Chenghao Wei, Jintao Zhao, Hanjian Yang, Bohan Liu, Yuejun Ouyang

Coatings· Volume 16· Issue 5

Abstract

Four groups of Ti-based amorphous composites with a nominal composition of Ti48Zr27Cu6Be14TM5 (at.%, TM = Ta, Nb, V and Co) were prepared and investigated. They were studied to explore the effect of transition metal elements on the microstructure and mechanical properties of Ti-based amorphous composites. The results reveal that V and Nb are predominantly distributed within the crystalline phase, while Ta exhibits no obvious elemental segregation behavior. In contrast, Co is predominantly concentrated within the amorphous matrix. These alloying elements exert a remarkable influence on the mechanical properties, including strength, plasticity and hardness. The Co-doped specimen achieved the highest yield strength and compressive strength, reaching 1942 MPa and 1977 MPa, respectively. Meanwhile, its crystalline and amorphous phases achieved maximum hardness of 566.9 HV0.005 and 451.8 HV0.005, respectively. However, it delivered the lowest plasticity, with the plastic strain nearly approaching zero. The Nb-containing specimen achieved the highest plasticity, with a percent elongation of 6.3%. Furthermore, the strength of amorphous composites is strongly correlated with the characteristics of both the crystalline phase and the amorphous matrix. Their plasticity is predominantly governed by the stress concentration factor of the crystalline phase. This study demonstrates that synergistic regulation of characteristics pertaining to the crystalline phase and amorphous matrix serves as a promising strategy to simultaneously enhance the strength and plasticity of amorphous composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Material, Electricity and Intelligent Manufacturing, Huaihua University, Huaihua 418000, China

Hunan Renewable Aluminum Innovation Research Center, Huaihua University, Huaihua 418000, China

Key Laboratory of Intelligent Control Technology for Wuling-Mountain Ecological Agriculture in Hunan Province, Huaihua University, Huaihua 418000, China

Funding

Science Research Excellent Youth Project of Hunan Educational Department · Key Program of Hunan Provincial Natural Science Foundation · Huaihua University Double First Class initiative Applied Characteristic Discipline of Control Science and Engineering · Social Science Foundation of Hunan Province

References (47)

Show source-provided references
1. Structures and functional properties of amorphous alloys10.1002/sstr.202000057 ↗
2. Feng, Z.Y., Geng, H.S., Zhuang, Y.Z., and Li, P.W. (2024). Progress, applications, and challenges of amorphous alloys: A critical review. Inorganics, 12.10.3390/inorganics12090232 ↗
3. High-strength and high-ductility nanostructured and amorphous metallic materials10.1002/adma.201401595 ↗
4. Substantially enhanced homogeneous plastic flow in hierarchically nanodomained amorphous alloys10.1038/s41467-023-39296-6 ↗
5. Deformation mechanism and hardening behavior of gradient heterostructured magnesium alloys prepared by severe shear deformation10.1016/j.jallcom.2024.174099 ↗
6. A synergistic design of composite metamaterial with drastically tailorable thermal expansion and Poisson’s ratio10.1016/j.compstruct.2021.114446 ↗
7. Microstructure, tensile properties and deformation behaviors of aluminium metal matrix composites co-reinforced by ex-situ carbon nanotubes and in-situ alumina nanoparticles10.1016/j.msea.2020.139930 ↗
8. In situ mechanical crystallization of amorphous alloys10.1016/j.jallcom.2023.171032 ↗
9. The synthesis and application of crystalline-amorphous hybrid materials10.1039/D3CS00860F ↗
10. In situ indentation and high cycle tapping deformation responses in a nanolaminate crystalline/amorphous metal composite10.1016/j.msea.2020.140074 ↗
11. Tailoring the strength-conductivity combination in Cu matrix composites via in-situ TiB2 synthesis10.1016/j.jmrt.2025.07.192 ↗
12. Microstructure evolution and wear resistance of in-situ nanoparticles reinforcing Fe-based amorphous composite coatings10.1016/j.surfin.2020.100652 ↗
13. Yang, W.B., Zhan, L., Liu, L., Meng, F.X., Zhang, R., Tuerxun, K., Zhao, X.R., Dong, B.X., Shu, S.L., and Jiang, Q.C. (2025). The Microstructure Regulation Mechanism and Future Application of Aluminum Alloys Manipulated by Nanocrystalline Structures Formed by In Situ Amorphous Crystallization. Materials, 18.10.3390/ma18174206 ↗
14. Wet chemical synthesis of amorphous nanomaterials with well-defined morphologies10.1021/accountsmr.1c00104 ↗
15. General modification strategy on amorphous materials to boost catalytic performance10.1002/adfm.202405867 ↗
16. Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder10.1016/j.msea.2015.10.048 ↗
17. Ti-based composite materials with enhanced thermal and mechanical properties10.1016/j.ceramint.2020.08.207 ↗
18. Glass-forming ability and competitive crystalline phases for lightweight TieBe-Based alloys10.1007/s11661-009-0122-9 ↗
19. A review of in situ observations of deformation-induced β↔α ″martensite transformations in metastable β Ti alloys10.1002/adem.202200281 ↗
20. High tensile ductility of Ti-based amorphous matrix composites modified from conventional Ti-6Al-4V titanium alloy10.1016/j.actamat.2013.01.061 ↗
21. Enthalpy of mixing of liquid Cu-Ni-Ti alloys at 1873 K10.1134/S003602950606005X ↗
22. Thermodynamic properties of the glass-forming ternary (Fe, Co, Ni, Cu)–Ti–Zr liquid alloys I. mixing enthalpies of liquid alloys10.1007/s11106-024-00422-8 ↗
23. Calorimetric investigation of the mixing enthalpy of liquid Co–Cu–Ti alloys at 1873 K10.1080/00319104.2017.1376058 ↗
24. Effect of transition metal elements (Cu, Ni, Co and Fe) on the mechanical properties of Ti-based bulk metallic glass composites10.1016/j.jallcom.2016.09.280 ↗
25. Huang, X.H., Wang, G., Chen, B., Wei, C.H., Zhao, J.T., Wu, L.G., and Ouyang, Y.J. (2025). Analysis of the regulatory effect of semi-solid isothermal treatment time on crystallization and plasticity of amorphous composites. Metals, 15.10.3390/met15121363 ↗
26. Designing advanced amorphous/nanocrystalline alloys by controlling the energy state10.1002/adma.202311406 ↗
27. Development of tough, low-density titanium based bulk metallic glass matrix composites with tensile ductility10.1073/pnas.0809000106 ↗
28. A strategy for designing Ti-based in-situ bulk metallic glass composites with tailored structural metastability using conventional titanium alloys10.1016/j.jmrt.2024.08.208 ↗
29. (2023). Metallic Materials—Vickers Hardness Test—Part 1: Test Method (Standard No. ISO 6507-1:2023).
30. Correlations between hardness and atomic bond parameters of pure metals and semi-metals after processing by high-pressure torsion10.1016/j.scriptamat.2010.09.034 ↗
31. First-principles study on structural stability, electronic structure and mechanical properties of VB group transition metal tungsten alloys W-TM (TM = V, Nb, Ta)10.1016/j.mtcomm.2023.107920 ↗
32. Effect of binder compositions on microstructure, hardness and magnetic properties of (Ta, Nb) C–Co and (Ta, Nb) C–Ni cemented carbides10.1016/j.ijrmhm.2008.10.017 ↗
33. Microstructure and mechanical properties of Zr-based metallic glass composites with size-variable tungsten reinforcements10.1016/j.jallcom.2024.177721 ↗
34. A real-time TEM study of the deformation mechanisms in β-Ti reinforced bulk metallic glass composites10.1016/j.msea.2021.141427 ↗
35. Tension-compression asymmetry of shear band stability in bulk metallic glasses10.1016/j.mtla.2025.102408 ↗
36. Microstructure evolution of Ti48Zr27Cu6Nb5Be14 amorphous alloy after semi-solid isothermal treatment10.1007/s41230-024-3051-8 ↗
37. Molecular dynamics study of fracture and plastic deformation of Cu/Cu64Zr36 crystalline/amorphous composites with a pre-existing void10.1016/j.jnoncrysol.2022.121556 ↗
38. Effects of void shape and location on the fracture and plastic deformation of Cu (crystalline)/Cu64Zr36 (amorphous) composites10.1016/j.jmrt.2023.04.057 ↗
39. The roles of loading rate and temperature during shear-band-to-crack transition (SCT) in bulk metallic glasses: A study of quasi-static and dynamic shearing performances at ambient and cryogenic temperatures10.1016/j.intermet.2024.108467 ↗
40. Microstructure and mechanical properties of Nb-reinforced bulk metallic glass composites prepared by laser powder bed fusion10.1007/s11223-025-00755-8 ↗
41. Microstructural het-erogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗
42. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions10.1103/PhysRevLett.84.2901 ↗
43. A micromechanical model of toughening behavior in the dual phase composite10.1016/j.ijplas.2010.01.005 ↗
44. Plasticity improvement for dendrite/metallic glass matrix composites by pre-deformation10.1016/j.matdes.2015.07.109 ↗
45. Effect of tungsten-particle size on the room temperature compressive deformation behaviour of Zr55Cu30Al10Ni5 amorphous alloy10.1016/j.jallcom.2024.176730 ↗
46. High mechanical strength and good plasticity of ZrAlNiCu bulk glassy alloys containing icosahedral or bcc β-Zr plus hexagonal ω-Zr phases prepared by annealing10.1016/j.msea.2025.148217 ↗
47. Internal structural evolution and enhanced tensile plasticity of Ti-based bulk metallic glass and composite via cold rolling10.1016/j.jallcom.2014.01.075 ↗