journal article·2026-06-01Open access

Enhancing Mechanical and Corrosion Resistance Properties of Fe-25Mn-12Cr-0.3C TWIP Steels via N Alloying and Processing Optimization

Lingxiao Hu, Xingfu Wang, Chuangzhi Jin, Yanxu Li, Juhua Liang

Coatings· Volume 16· Issue 6

Abstract

High-Mn twinning-induced plasticity (TWIP) steels are renowned for their exceptional strength-ductility synergy. However, their practical applications are severely constrained by inadequate yield strength and poor corrosion resistance. In this study, an N-alloyed TWIP steel (Fe-25Mn-12Cr-0.3C-0.3N, wt.%, designated as TWIP-2) was developed, using an N-free counterpart (Fe-25Mn-12Cr-0.3C, TWIP-1) as a reference. Both steels underwent hot forging (HF) followed by solution treatment (ST). The synergistic effects of N alloying and thermomechanical processing on the microstructural evolution, mechanical properties, and corrosion behavior were systematically investigated. Results indicate that all samples retain a single-phase FCC austenitic structure. N alloying increased the yield strength of the hot-forged TWIP steel from 488.1 MPa to 802.9 MPa while maintaining an elongation after fracture around 40%. Solution treatment markedly improved corrosion resistance, changing the corrosion mode from intergranular attack to pitting. The TWIP-2-ST specimen exhibited the lowest corrosion current density of 2.88 × 10−5 A/cm2 and demonstrated the best overall performance. This comprehensive improvement in mechanical and corrosion performance is primarily attributed to the elevated work-hardening capacity, a higher fraction of low-energy grain boundaries, and the beneficial role of interstitial N in suppressing pitting nucleation and propagation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Institute of Interdisciplinary Sciences (RISE), School of Materials Science & Engineering, Dongguan University of Technology, Dongguan 523808, China

Key Laboratory of Materials Physics, Institute of Solid State Physics, Hefei Institutes of Physical Science (HFIPS), Chinese Academy of Sciences, Hefei 230031, China

Funding

Guangdong Basic and Applied Basic Research Foundation · Anhui Provincial Key Laboratory of Special Welding Technology Open Fund · Science and Technology Innovation Tackling Plan of Anhui Province · Key R&D Program of Yunnan Province

References (38)

Show source-provided references
1. Phase transformations and mechanical properties of Fe-Mn-Si-Al TRIP-steels
2. Mechanism-controlled thermomechanical treatment of high Mn steels10.1016/j.msea.2021.142056 ↗
3. Improved yield strength-ductility synergy of a high Mn TWIP steel by grain refinement and partial recrystallization10.1016/j.msea.2024.147355 ↗
4. Study on the mechanical behavior of twinning-induced plasticity steel processed by warm forging and annealing10.1007/s10853-018-2597-5 ↗
5. Improved mechanical properties of a twinning-induced plasticity steel prepared by directional solidification10.1016/j.msea.2015.03.118 ↗
6. Microstructures and mechanical properties of additively manufactured Fe-30Mn-3Al-3Si TWIP steel using laser powder bed fusion10.1016/j.msea.2024.147087 ↗
7. Microstructures and mechanical properties of additively manufactured Fe-21Mn-0.6C TWIP steel using laser powder bed fusion
8. Kim, G.Y.K. (2021). An overview of high yield strength twinning-induced plasticity steels. Metals, 11.10.3390/met11010124 ↗
9. Design and verification of energy absorption material for the soft landing gear of the Tianwen-1 Mars probe
10. High Mn austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
11. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
12. Improvement of the anti-corrosion property of twinning-induced plasticity steel by twin-induced grain boundary engineering10.1016/j.matlet.2017.09.102 ↗
13. Effect of Cr on mechanical properties and corrosion behaviors of FeMn-C-Al-Cr-N TWIP steels10.1016/j.jmst.2017.08.004 ↗
14. Si, Y.L., Wang, X.F., Liang, J.H., and Xue, J.T. (2022). Research on Microstructures and Properties of High-Strength Anticorrosion Twinning-Induced Plasticity Steels. Metals, 12.10.3390/met12040537 ↗
15. Effect of Cr Addition on the Corrosion Behavior of Twinning-Induced Plasticity Steel
16. Development of high-strength corrosion-resistant austenitic TWIP steel
17. Mechanical properties of (20-30)Mn12Cr(0.56-0.7)CN corrosion resistant austenitic TWIP steels10.1002/srin.201100316 ↗
18. Effects of carbon and N on precipitation and tensile behavior in 15Cr-15Mn-4Ni austenitic stainless steels10.1016/j.msea.2017.11.099 ↗
19. Effect of partial replacement of carbon by nitrogen on intergranular corrosion behavior of high nitrogen martensitic stainless steels10.1016/j.jmst.2019.06.004 ↗
20. Influences of Mn in solid solution on the pitting corrosion behaviour of Fe-23 wt%Cr-based alloys10.1016/j.electacta.2016.01.118 ↗
21. Effects of Mn on the localized corrosion behavior of Fe-18Cr alloys10.1016/j.electacta.2010.01.006 ↗
22. Effect of Mn on the Growth Behavior of Pre-oxidized Film on the Heat-resistant Steel Surface10.1007/s11085-024-10242-1 ↗
23. Effect of N+Cr alloying on the microstructures and tensile properties of Hadfield steel10.1016/j.msea.2016.09.106 ↗
24. Influence of N alloying on properties of Fe-18Cr-12Mn-XN austenitic stainless steels10.1016/j.msea.2013.08.053 ↗
25. N significantly enhances corrosion resistance of 316L stainless steel in thiosulfate-chloride solution10.1016/j.corsci.2020.108792 ↗
26. Temperature effect on deformation mechanisms and mechanical properties of a high Mn C+N alloyed austenitic stainless steel10.1016/j.msea.2015.06.047 ↗
27. The influence of N and grain size on yield strength in Type AISI 316L austenitic stainless steel10.1179/msc.1977.11.6.208 ↗
28. Effects of C and N on high-temperature deformation behavior of 15Cr-15Mn-4Ni austenitic stainless steels10.1016/j.msea.2021.141463 ↗
29. First principle study on the effect of Cr, Mn and Ni on electronic structure and mechanical properties of high N steel10.1007/s00339-022-06167-8 ↗
30. Enhancing dry sliding wear resistance of high-Mn austenitic steel by adding N
31. The effects of N on the microstructures and tensile properties of Fe-15Mn-0.6C-2Cr-xN twinning-induced plasticity steels10.1016/j.actamat.2013.07.036 ↗
32. Effects of intergranular deformation incompatibility on stress state and fracture initiation at grain boundary: Experiments and crystal plasticity simulations10.1016/j.ijplas.2024.104052 ↗
33. Enhancement of yield strength by Cr/N alloying in high-Mn cryogenic steel10.1016/j.msea.2017.05.023 ↗
34. (2010). Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature (Standard No. GB/T 228.1-2010).
35. (2009). Corrosion of Metals and Alloys—Test Method for Potentiodynamic Polarization Measurement (Standard No. GB/T 24196-2009).
36. Effects of carbon and N on Hall-Petch relationship in austenitic stainless steel10.1016/j.jmrt.2022.06.052 ↗
37. Dependence of corrosion resistance on grain boundary characteristics in a high N CrMn austenitic stainless steel10.1016/j.jmst.2017.09.016 ↗
38. Effect of grain boundary engineering on electrochemical and intergranular corrosion of 316L stainless steel10.1016/j.corsci.2025.113050 ↗