journal article·2026-07-17Open access

Grain Refinement and Property Trade-Offs in Laser Cladded Ni60-WC Coating Induced by 2% ZrO2 Addition

Xianglin Wu, Jingquan Wu, Dianlong Chen

Coatings· Volume 16· Issue 7

Abstract

To improve the surface properties of Q235 steel, two types of composite coatings were prepared using laser cladding technology: a 25% WC + 75% Ni60 coating (Group NO) and a 25% WC + 73% Ni60 coating with 2% ZrO2 added (Group 2). Through XRD, SEM, microhardness testing, friction and wear testing, and electrochemical testing, the effects of ZrO2 on the phase composition, microstructure, mechanical properties, and corrosion resistance of the coatings were systematically investigated. The results indicate that upon the addition of ZrO2, Zr atoms solid-solve into the γ-Ni lattice, causing the grain size to refine from 17.36 nm to 10.84 nm, and the carbides to transform from coarse cuboidal particles (average 4.00 μm) into fine, irregularly shaped, dispersed particles (average 2.93 μm); the average hardness of the coating decreased from 901.51 HV0.2 to 576.20 HV0.2, but the uniformity of the hardness distribution improved significantly (standard deviation decreased from 142.75 to 29.74); the coefficient of friction increased from 0.71 to 0.85, and the wear volume increased from 0.04 mm3 to 0.38 mm3, indicating a decline in wear resistance; in a 3.5% NaCl solution, the corrosion potential shifted positively by 38 mV, and the corrosion rate decreased from 0.7234 mm·a−1 to 0.7071 mm·a−1, indicating a slight improvement in corrosion resistance. In summary, the addition of 2% ZrO2 achieves grain refinement, carbide homogenization, and improved corrosion resistance, but reduces hardness and wear resistance. It is suitable for operating conditions where corrosion resistance and microstructural uniformity are the primary considerations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Guangdong Ocean University, Zhanjiang 524088, China

Guangdong Engineering Technology Research Center of Ocean Equipment and Manufacturing, Zhanjiang 524088, China

Funding

Zhanjiang Science and Technology Plan Project · Laser Processing Team Project of Guangdong Ocean University · Zhanjiang Science and Technology Program · Guangdong Ocean University Education Reform Project · Ministry of Education Industry-Academia Cooperation and Collaborative Education Project

References (44)

Show source-provided references
1. Wu, X., Chen, J., Huang, J., Shi, W., Wang, Q., An, F., and Wu, J. (2024). Laser-Melted Wc/Ni-Based Coating Remelting Study on Q235 Steel Surface. Coatings, 14.10.3390/coatings14091172 ↗
2. Cao, Y., Yan, K., Shi, W., Zhou, R., Li, B., and Qin, J. (2024). Experimental Study on the Microstructure and Tribological Properties of Laser-Clad Ni60-WC Composite Coatings. Materials, 17.10.3390/ma17184638 ↗
3. Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding10.1016/j.jallcom.2015.04.136 ↗
4. Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings10.1016/j.matdes.2015.12.121 ↗
5. Microstructure characteristics of Ni/WC composite cladding coatings10.1007/s12613-016-1226-z ↗
6. Effect of WC content on microstructure and properties of WC/Ni60 laser cladding layer
7. Effect of nano-ZrO2 protective layer on the microstructure and surface property strengthening mechanism of underwater wet laser Fe-based cladding layer10.1016/j.matchar.2023.113392 ↗
8. High-temperature and interfacial oxidation of MAX phase-reinforced composite coatings deposited by laser cladding on Zr alloy substrates10.1016/j.ceramint.2023.09.200 ↗
9. Synergistic regulation of microstructure evolution and wear/corrosion resistance performance of Ni-based/WC coatings by CeO2 and ZrO2
10. Influence of ZrO2 Nanoparticles on Microstructure and Properties of Additive Manufactured Magnesium Alloys10.1016/j.jallcom.2025.185017 ↗
11. Investigation of the zirconium forms in nickel melts containing exogenous refractory oxide nanophases10.1134/S2075113318030036 ↗
12. Zhang, P., Liu, C., and Pang, Y. (2024). Effects of ZrW2O8 Content on the Microstructures and Properties of Composite Coatings Produced by Laser Cladding. Coatings, 14.10.3390/coatings14050649 ↗
13. Wu, J., Zhang, J., Chen, D., Huang, J., Shi, W., An, F., and Wu, X. (2025). Study on the Effect of CeO2 on the Performance of WC + Ni60 Laser Cladding Coating. Lubricants, 13.10.3390/lubricants13010024 ↗
14. Effect of laser remelting on the organization and properties of WC/Ni-based coatings generated in situ by laser cladding10.1016/j.jmapro.2023.07.075 ↗
15. Effect of different zirconium contents on the corrosion resistance of ZrO2-TiO2 film-coated stainless steel10.1007/s11665-018-3639-5 ↗
16. Fabrication of Ni-ZrO2 nanocomposites through a new electroforming bath and Assessment of their morphology, wear, and corrosion resistance10.1016/j.heliyon.2024.e35779 ↗
17. Influence of ultrasonic assistance on the microstructure and friction properties of laser cladded Ni60/WC composite coatings10.1016/j.jallcom.2024.177149 ↗
18. Microstructure and Tribological Properties of In Situ-Synthesized WC-Reinforced Ni60 Coatings Prepared by Laser Cladding with Different Scanning Rates10.1007/s11666-024-01781-9 ↗
19. Effect of laser remelting on internal defects and properties of Ni-based coatings reinforced by multi-channel WC in situ10.1016/j.mtcomm.2024.108375 ↗
20. Roles of Zr and Y in cast microstructure of M951 nickel-based superalloy10.1016/S1003-6326(11)61361-7 ↗
21. A comprehensive review on the rare earth elements improving microstructure and properties of laser cladded coatings10.1016/j.jallcom.2025.181761 ↗
22. Size-driven phase transformation and microstructure evolution of ZrO2 nanocrystallites associated with thermal treatments10.1016/j.jeurceramsoc.2021.04.058 ↗
23. Elemental partitioning and corrosion resistance of Ni–Cr alloys revealed by accurate ab-initio thermodynamic and electrochemical calculations10.1038/s41529-023-00414-w ↗
24. Synthesis of Ni–Fe and Ni–Fe/ZrO2 composite coating and evaluation of its structural and corrosion resistance10.1016/j.matchemphys.2019.122595 ↗
25. Electrochemical and structural evaluation of Poly (VTZ-co-GMA)/ZrO2 nanocomposite coatings for corrosion protection of mild steel10.1007/s11696-025-04505-7 ↗
26. Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating10.1016/j.optlastec.2022.108449 ↗
27. Multifunctional Properties of Electrodeposited Nickel Composite Coating Containing Nanosized Monoclinic Zirconia Particles
28. Improving corrosion resistance associated with martensite in austenitic stainless steel by modulating variant selection10.1016/j.corsci.2026.113792 ↗
29. Water-lubricated Ni-based composite (Ni–Al2O3, Ni–SiC and Ni–ZrO2) thin film coatings for industrial applications10.1007/s40195-015-0354-1 ↗
30. Electrodeposition and tribocorrosion behaviour of ZrO2–Ni composite coatings10.1007/s10800-009-9859-5 ↗
31. Microstructure and wear behavior of Ni alloy/ZrO2/Ni@ MoS2 composite coating produced by laser cladding technology on titanium alloy10.1016/j.jmapro.2025.10.045 ↗
32. Effects of WC Particles on Microstructure and Wear Behavior of Laser Cladding Ni60 Composite Coatings10.1016/j.optlastec.2023.109425 ↗
33. Laser cladded Ni60WC coatings: Structure evolution, atomic model and electrochemical corrosion10.1016/j.jmrt.2025.07.224 ↗
34. Effect of large-size micro-convex surface on tribological performance of spherical Ti-6Al-4V/Al-7Si-0.3 Mg composite10.1016/j.triboint.2025.111316 ↗
35. Dry Friction Behavior during Plastic Deformation of a 6063 Al Alloy at Micro–mesoscopic Scale10.1007/s11665-025-12007-6 ↗
36. Huang, X., Chen, Y., Jiang, J., Lian, G., and Chen, C. (2023). The Influences of Ultrasonic Vibrations on Laser Cladding Ni60/WC-TiO2+La2O3 Composite Coating. Materials, 16.10.3390/ma16196356 ↗
37. Friction and wear behavior of copper metal matrix composites at temperatures up to 800 C10.1016/j.jmrt.2022.05.192 ↗
38. Microstructure, wear and corrosion resistance of Ni-based composite coating by multi-layer laser cladding10.1016/j.mtcomm.2024.110369 ↗
39. Microstructural, mechanical and corrosion characterization of electroless Ni-P composite coatings modified with ZrO2 reinforcing nanoparticles10.1016/j.surfcoat.2023.129981 ↗
40. The effect of co-electrodeposited ZrO2 particles on the microstructure and corrosion resistance of Ni coatings10.1007/s10008-010-1229-z ↗
41. Molecular probes reveal deviations from Amontons’ law in multi-asperity frictional contacts10.1038/s41467-018-02981-y ↗
42. Surface engineering design on alleviating fretting wear: A review10.1007/s44251-023-00003-8 ↗
43. Microstructural Evolution and Tribocorrosion Performance of Novel Laser Clad Ti-Ni-ZrO2 Composite Coatings in 3.5% NaCl Solution
44. Preparation of nickel-based composite coatings by laser cladding technology: A review