Surface characterization of a silicone hydrogel contact lens having bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer layer in hydrated state
Source abstract
Abstract
A silicone hydrogel contact lens material, with a unique chemical and physical structure has been designed for long-term ocular performance. Enhancement of this silicone hydrogel contact lens material was achieved through surface modification using a cross-linkable bioinspired 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which creates a soft surface gel layer on the silicone hydrogel base material. The surface properties of this MPC polymer-modified lens were characterized under hydrated condition revealing, inter alia, its unique polymer structure, excellent hydrophilicity, lubricity, and flexibility. Analysis of the MPC polymer layer in a hydrated state was performed using a combination of a high-resolution environmental scanning electron microscopy and atomic force microscopy. Compared to the silicone hydrogel base material, this surface had a higher captive bubble contact angle, which corresponds to higher hydrophilicity of the surface. In addition, the hydrated MPC polymer layer exhibited an extremely soft surface and reduced the coefficient of friction by more than 80 %. These characteristics were attributed to the hydration state of the MPC polymer layer on the surface of the silicone hydrogel base material. Also, interaction force of protein deposition was lowered on the surface. Such superior surface properties are anticipated to contribute to excellent ocular performance.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ocular Surface and Contact Lens · Polymer Surface Interaction Studies · Retinal and Macular Surgery
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Contact lens materials: a materials science perspective10.3390/ma12020261 ↗
2. West KP. PMMA: an essential material in medicine and dentistry10.1615/JLongTermEffMedImplants.v15.i6.60 ↗
3. Hydrogels in ophthalmic applications10.1016/j.ejpb.2015.05.016 ↗
4. Biocompatibility in the development of silicone-hydrogel lenses10.1097/ICL.0b013e31827dbb00 ↗
5. Uptake and release phenomena in contact lens care by silicone hydrogel lenses10.1097/ICL.0b013e31827d4f25 ↗
6. Contact lens technology: from fundamentals to applications10.1002/adhm.201900368 ↗
7. Soft contact lens polymers: an evolution10.1016/S0142-9612(01)00165-X ↗
8. Mechanical properties of contact lenses: the contribution of measurement techniques and clinical feedback to 50 years of materials development10.1016/j.clae.2016.11.005 ↗
9. Deposition on silicone hydrogel lenses10.1097/ICL.0b013e318275305b ↗
10. Lipid deposition on hydrogel contact lenses: how history can help us today10.1097/OPX.0b013e3180485d4b ↗
11. Silicone hydrogel contact lenses and the ocular surface10.1016/S1542-0124(12)70262-8 ↗
12. Soft contact lens biomaterials from bioinspired phospholipid polymers10.1586/17434440.3.2.167 ↗
13. Revolutionary advances in 2-methacryloyloxyethyl phosphorylcholine polymers as biomaterials10.1002/jbm.a.36635 ↗
14. Six month clinical evaluation of a biomimetic hydrogel contact lens
15. Omafilcon A (Proclear) soft contact lenses in a dry eye population
16. The on-eye dehydration of proclear compatibles lenses
17. Super-hydrophilic silicone hydrogels with interpenetrating poly(2-methacryloyloxyethyl phosphorylcholine) networks10.1016/j.biomaterials.2010.01.026 ↗
18. Antifouling silicone hydrogel contact lenses via densely grafted phosphorylcholine polymers10.1116/6.0000366 ↗
19. Qiu, Y.; Pruitt, J.D.; Thekveli, S.J.; Tucker, R.C.; Nelson, J. Silicone hydrogel lenses with water-rich surfaces. U.S. Patent 8,939,577, Jan. 27, 2015.
20. Ruthenium tetraoxide staining of polymers for electron-microscopy10.1021/ma00238a021 ↗
21. Interfacial staining of a phase-separated block copolymer with ruthenium tetroxide10.1021/ma061914u ↗
22. Enhanced visualization of microbial biofilms by staining and environmental scanning electron microscopy10.1016/j.mimet.2006.10.018 ↗
23. Force-distance curves by atomic force microscopy10.1016/S0167-5729(99)00003-5 ↗
24. Force measurements with the atomic force microscope: technique, interpretation and applications10.1016/j.surfrep.2005.08.003 ↗
25. Determination of elastic moduli of thin layers of soft material using the atomic force microscope
26. Atomic force microscopy of polymer brushes: colloidal versus sharp tips10.1021/la9047374 ↗
27. Method for quantitative measurements of the elastic modulus of biological cells in AFM indentation experiments10.1016/j.ymeth.2013.03.037 ↗
28. Mapping micromechanical properties of soft polymer contact lenses10.1016/j.polymer.2014.09.053 ↗
29. Recent advances in micromechanical characterization of polymer, biomaterial, and cell surfaces with atomic force microscopy10.7567/JJAP.54.08LA02 ↗
30. Molecular interaction forces generated during protein adsorption to well-defined polymer brush surfaces10.1021/acs.langmuir.5b00351 ↗
31. Quantitative evaluation of interaction force between functional groups in protein and polymer brush surfaces10.1021/la404981k ↗
32. Effects of molecular interactions at various polymer brush surfaces on fibronectin adsorption induced cell adhesion10.1016/j.colsurfb.2020.111205 ↗
33. Application of environmental scanning electron microscopy to determine biological surface structure10.1111/j.1365-2818.2009.03111.x ↗
34. Electron microscopy of specimens in liquid10.1038/nnano.2011.161 ↗
35. Electron microscopy of whole cells in liquid with nanometer resolution10.1073/pnas.0809567106 ↗
36. Recent advances in electron imaging, image interpretation and applications: environmental scanning electron microscopy10.1098/rsta.2003.1279 ↗
37. Electron microscopy of cells and tissues10.1097/00000441-197007000-00024 ↗
38. Investigation of micromechanical properties of hard sphere filled composite hydrogels by atomic force microscopy and finite element simulations10.1016/j.jmbbm.2017.10.035 ↗
39. Probing elastic properties of soft materials with AFM: data analysis for different tip geometries10.1016/j.polymer.2016.02.020 ↗
40. The unique hydration state of poly(2-methacryloyloxyethyl phosphorylcholine)10.1080/09205063.2017.1298278 ↗
41. Blood-compatible surfaces with phosphorylcholine-based polymers for cardiovascular medical devices10.1021/acs.langmuir.8b01565 ↗
42. Quantitative analysis of the viscoelastic properties of thin regions of fibroblasts using atomic force microscopy10.1016/S0006-3495(04)74245-9 ↗
43. Indenting polymer brushes of varying grafting density in a viscous fluid: a gradient approach to understanding fluid confinement10.1016/j.polymer.2019.02.040 ↗
44. A two-step method for rate-dependent nano-indentation of hydrogels10.1016/j.polymer.2018.01.017 ↗
45. Space-resolved quantitative mechanical measurements of soft and supersoft materials by atomic force microscopy10.1038/am.2016.170 ↗
46. Measuring the mechanical properties of living cells using atomic force microscopy
47. Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy10.1021/bm900520n ↗
48. Lubricity of surface hydrogel layers10.1007/s11249-012-0076-8 ↗
49. Friction measurements on contact lenses in their operating environment10.1007/s11249-011-9856-9 ↗
50. Friction coefficient of soft contact lenses: measurements and modeling10.1007/s11249-005-3610-0 ↗
51. Hydrated phospholipid polymer gel-like layer for increased durability of orthopedic bearing surfaces10.1021/acs.langmuir.8b01494 ↗
52. Surface grafting of artificial joints with a biocompatible polymer for preventing periprosthetic osteolysis10.1038/nmat1233 ↗