Simulating and Predicting the Part Warping in Fused Deposition Modeling by Thermal–Structural Coupling Analysis
Source abstract
Abstract
As the most commonly used additive manufacturing technology, fused deposition modeling (FDM) still faces some technical issues caused by temperature change-induced unsteady thermal stress and warping. These issues can further lead to the deformation of printed parts and even terminate the printing process. In response to these issues, this article established a numerical model of temperature field and thermal stress field for FDM by finite element modeling and “birth–death element” technique to predict the deformation of the part. What makes sense in this process is that the logic of elements sort based on ANSYS Parametric Design Language (APDL) was proposed to sort the meshed elements, which was aimed to perform FDM simulation quickly on the model. In this work, the effects of the sheets shape and infill line directions (ILDs) on the distortion during FDM were simulated and verified. From the analysis of stress field and deformation nephogram, the simulation results indicated that ILD had greater effects on the distortion. Moreover, the sheet warping became most serious when the ILD was aligned with the diagonal of the sheet. The simulation results matched well with the experimental results. Thus, the proposed method in this work can be used to optimize the printing parameters for FDM process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory for Biobased Materials and Energy of Ministry of Education, Guangzhou, China.
Research Center of Biomass 3D Printing Materials, College of Materials and Energy, South China Agricultural University, Guangzhou, China.
Mechanical Engineering Department, University of Nevada Reno, Reno, Nevada, USA.
College of Engineering, South China Agricultural University, Guangzhou, China.
References (42)
Show source-provided references
1. 10.1002/adfm.20200306210.1002/adfm.202003062 ↗
2. 10.1108/RPJ-08-2018-019210.1108/RPJ-08-2018-0192 ↗
3. 10.1016/j.dental.2015.09.01810.1016/j.dental.2015.09.018 ↗
4. Zhou J, , Tian Z, , Tian QY, et al. 3D bioprinting of a biomimetic meniscal scaffold for application in tissue engineering. Bioact Mater, 2021; 6:1711–1726.
5. 10.1002/adhm.20200072410.1002/adhm.202000724 ↗
6. 10.3390/polym1209194610.3390/polym12091946 ↗
7. 10.1016/j.autcon.2020.10326810.1016/j.autcon.2020.103268 ↗
8. 10.1109/JPROC.2016.262509810.1109/JPROC.2016.2625098 ↗
9. 10.1016/j.compositesb.2020.10833610.1016/j.compositesb.2020.108336 ↗
10. 10.1016/j.pmatsci.2020.10063810.1016/j.pmatsci.2020.100638 ↗
11. 10.1007/s12289-019-01523-110.1007/s12289-019-01523-1 ↗
12. 10.1016/j.addma.2017.11.00210.1016/j.addma.2017.11.002 ↗
13. 10.1155/2016/904308610.1155/2016/9043086 ↗
14. 10.1016/S0141-3910(02)00045-910.1016/S0141-3910(02)00045-9 ↗
15. 10.1016/j.polymdegradstab.2006.03.01910.1016/j.polymdegradstab.2006.03.019 ↗
16. 10.1016/j.polymer.2017.07.04210.1016/j.polymer.2017.07.042 ↗
17. Yang FW, , Ye XL, , Chen GG, et al. Novel AIE luminescent tetraphenylethene-doped poly (lactic acid) composites for fused deposition modeling and their application in fluorescent analysis of 3D printed products. Compos Part B Eng, 2021; 219.
18. 10.1002/app.4903810.1002/app.49038 ↗
19. 10.1007/s00170-006-0556-910.1007/s00170-006-0556-9 ↗
20. 10.1108/RPJ-01-2013-001210.1108/RPJ-01-2013-0012 ↗
21. 10.1108/RPJ-02-2013-001710.1108/RPJ-02-2013-0017 ↗
22. 10.1080/10426914.2019.159425210.1080/10426914.2019.1594252 ↗
23. 10.1016/j.proeng.2015.12.48810.1016/j.proeng.2015.12.488 ↗
24. Sardinha M, , Vicente CMS, , Frutuoso N, et al. Effect of the ironing process on ABS parts produced by FDM. Mater Des Process Commun, 2020; 3:e151.
25. 10.3390/ma1411290710.3390/ma14112907 ↗
26. 10.1115/1.404162610.1115/1.4041626 ↗
27. Compton BG, , Post BK, , Duty CE, et al. Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites. Addit Manuf, 2017; 17:77–86.
28. 10.1243/09544054JEM99010.1243/09544054JEM990 ↗
29. 10.1243/09544054JEM57210.1243/09544054JEM572 ↗
30. 10.1016/j.ijfatigue.2019.10545510.1016/j.ijfatigue.2019.105455 ↗
31. 10.1007/s42243-021-00559-510.1007/s42243-021-00559-5 ↗
32. 10.1088/2053-1591/ab23cf10.1088/2053-1591/ab23cf ↗
33. 10.1007/s11666-017-0538-510.1007/s11666-017-0538-5 ↗
34. 10.1243/09544054JEM162410.1243/09544054JEM1624 ↗
35. 10.1016/j.matdes.2019.10840910.1016/j.matdes.2019.108409 ↗
36. Ni XY, , Zhang YH, , Pan CW. The degradable performance of bile-duct stent based on a continuum damage model: A finite element analysis. Int J Numer Meth Bio, 2020; 36:e3370.
37. 10.1002/pen.2542310.1002/pen.25423 ↗
38. Zhou XF Hsieh SJ. Thermal analysis of fused deposition modeling process using infrared thermography imaging and finite element modeling. Proc. SPIE 10214. 9–13 April 2017. Anaheim California United States. Thermosense: Thermal Infrared Applications XXXIX; 2017. 1021409.10.1117/12.2262796 ↗
39. 10.1007/s12206-018-0636-410.1007/s12206-018-0636-4 ↗
40. Cerda-Avila SN, , Medellín-Castillo HI, , de Lange DF. Analysis and numerical simulation of the structural performance of fused deposition modeling samples with variable infill values. J Eng Mater-T Asme, 2019; 141.
41. 10.1016/j.rcim.2017.09.00710.1016/j.rcim.2017.09.007 ↗
42. 10.1016/j.ijengsci.2020.10341210.1016/j.ijengsci.2020.103412 ↗