Assessing strain fields in unbalanced unidirectional non-crimp fabrics
Source abstract
Abstract
Abstract Automation of fabric preforming for resin transfer moulded composite parts motivates the need to characterize the response of dry fabric, which is required for the development of simulation models to predict potential draping defects. In this study, the in-plane tensile-shear response of a heavy-tow unidirectional non-crimp fabric (UD-NCF) subjected to bias tensile loading was investigated. Challenges associated with fabric surface texturization and associated strain measurement through digital image correlation was addressed by using a mixture of oil-based paint and mineral spirits to create a suitable speckle pattern. Custom clamps were also designed to prevent the test specimen from damaging or sliding from the grips. Strain maps revealed that the off-axis extension tests induced combined shear, tensile and compressive strains in the fabric test specimens. The fabric deformation response and proposed methods are relevant aspects for characterizing unbalanced UD-NCFs and calibrating corresponding draping simulation models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Finite element forming simulation of locally stitched non-crimp fabrics10.1016/j.compositesa.2014.02.020 ↗
2. Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming10.1007/s12289-009-0646-y ↗
3. Impact of HP-RTM process parameters on mechanical properties using epoxy and polyurethane
4. Haanappel S. Forming of UD fibre reinforced thermoplastics. PhD thesis. University of Twente, 2013. https://doi.org/10.3990/1.9789036535014.10.3990/1.9789036535014 ↗
5. A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF)10.1016/j.compositesa.2017.08.009 ↗
6. Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern10.1016/j.compositesa.2016.09.016 ↗
7. Modelling the development of defects during composite reinforcements and prepreg forming
8. Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments10.1016/j.compscitech.2003.10.015 ↗
9. Full-field strain measurements in textile deformability studies10.1016/j.compositesa.2007.09.014 ↗
10. Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF)10.1016/j.compositesa.2015.10.004 ↗
11. Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results10.1016/j.compositesa.2008.02.016 ↗
12. Numerical modelling of the mechanical behaviour of tetraxial technical textiles10.1007/s10853-018-3084-8 ↗
13. Experimental measurements and numerical modelling of the mechanical behaviour of a glass plain weave composite reinforcement10.1177/0731684419868846 ↗
14. Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation10.1016/j.compositesa.2005.01.007 ↗
15. Boisse P. Advances in composites manufacturing and process design. Cambridge: Woodhead Publishing; 2015. https://doi.org/10.1016/C2014-0-02644-5.10.1016/C2014-0-02644-5 ↗
16. Analyses of the deformation mechanisms of non-crimp fabric composite reinforcements during preforming10.1007/s10443-011-9207-x ↗
17. Mouritz AP. Introduction to aerospace materials. 1st ed. Cambridge: Woodhead Publishing; 2012. https://doi.org/10.1533/9780857095152.10.1533/9780857095152 ↗
18. Laurenzi S, Marchetti M. Advanced composite materials by Resin transfer molding for aerospace applications. In: Hu N, editor. Compos their prop, 1st ed., Rijeka: Intech; 2012. p. 197–226. https://doi.org/10.5772/48172.10.5772/48172 ↗
19. The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review10.1007/s12289-016-1294-7 ↗
20. Bending of unidirectional non-crimp-fabrics: experimental characterization, constitutive modeling and application in finite element simulation10.1007/s11740-014-0568-5 ↗
21. Mechanical characterisation of glass- and carbon-fibre-reinforced composites made with non-crimp fabrics10.1016/S0266-3538(97)00053-5 ↗
22. Experimental measurement of wrinkle formation during draping of non-crimp fabric10.1016/j.compositesa.2015.12.011 ↗
23. Lomov SV, Truong Chi T, Verpoest I. Mechanical properties of non-crimp fabric (NCF) based composites: Stiffness and strength. In: Lomov SV, editor. Non-crimp fabr compos manuf prop appl, 1st ed., Cambridge: Woodhead Publishing Limited; 2011, p. 1–523. https://doi.org/10.1533/9780857092533.10.1533/9780857092533.3.263 ↗
24. Schneider M. Automated analysis of defects in non-crimp fabrics for composites. In: Lomov SV., editor. Non-crimp fabr compos, 1st ed., Cambridge: Woodhead Publishing Limited; 2011, p. 103–14. https://doi.org/10.1533/9780857092533.4.461.10.1533/9780857092533.1.103 ↗
25. A multi-step biaxial bias extension test for wrinkling/de-wrinkling characterization of woven fabrics: towards optimum forming design guidelines10.1016/j.matdes.2018.02.075 ↗
26. Mechanical characterization of tetraxial textiles10.1177/1528083717721920 ↗
27. A mesoscopic analytical model to predict the onset of wrinkling in plain woven preforms under bias extension shear deformation10.3390/ma10101184 ↗
28. Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests10.1016/j.compstruct.2017.11.033 ↗
29. A continuum constitutive model for the mechanical behavior of woven fabrics10.1016/j.ijsolstr.2004.10.030 ↗
30. Xiao S, Wang P, Soulat D, Legrand X, Gao H. Studies of in-plane shear behaviour of braided composite reinforcements. In: AIP conf proceedings. London; April 23, 2018. https://doi.org/10.1063/1.5034840.10.1063/1.5034840 ↗
31. Analysis of the in-plane shear behaviour of non-orthogonally textile reinforcements: application to braided fabrics10.1016/j.compositesb.2018.07.040 ↗
32. A modular modeling approach for describing the in-plane forming behavior of unidirectional non-crimp-fabrics10.1007/s11740-014-0561-z ↗
33. Surface topography and contact mechanics of dry and wet human skin10.3762/bjnano.5.147 ↗
34. Application of Digital Image Correlation to composite reinforcements testing10.1016/j.compstruct.2016.10.096 ↗
35. Improving the accuracy of the uniaxial bias extension test on engineering fabrics using a simple wrinkle mitigation technique10.1016/j.compositesa.2018.02.025 ↗
36. Two-way approach for deformation analysis of non-crimp fabrics in uniaxial bias extension tests based on pure and simple shear assumption10.1007/s12289-019-01481-8 ↗
37. Correlated Solutions. Vic-2D V6 manual; 2009.
38. Schreier H, Orteu J-J, Sutton MA. Image correlation for shape, motion and deformation measurements. Boston, MA: Springer US; 2009. https://doi.org/10.1007/978-0-387-78747-3.10.1007/978-0-387-78747-3 ↗
39. Li J, Zeng D, Zhu X, Xu W, Zhang B, Yang L. Property and fiber orientation determination for carbon fiber composite. SAE tech pap 2018; 2018-April:1–7. https://doi.org/10.4271/2018-01-1216.10.4271/2018-01-1216 ↗
40. Characterization of stress–strain behavior of composites using digital image correlation and finite element analysis10.1016/j.compstruct.2015.12.018 ↗