journal article·2015-01

Effect of processing conditions and electrode characteristics on the electrical properties of structural composite capacitors

D.J. O’Brien, D.M. Baechle, O.B. Yurchak, E.D. Wetzel

Publisher page

Abstract

Abstract Structural capacitors are manufactured from glass fabric/epoxy prepreg dielectrics and metalized polymer film electrodes. The electrical breakdown strengths of these multifunctional materials are investigated across a wide range of electrode constructions and processing parameters. The results show that electrode selection and materials processing have a significant impact on the energy that the device can store. Also, this careful consideration of processing parameters and electrode construction has led to the development of a structural capacitor with an energy density exceeding 0.90 J/cm3, the highest yet reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of recent research on mechanics of multifunctional composite materials and structures10.1016/j.compstruct.2010.05.003 ↗
2. Electrochemical and mechanical behavior in mechanically robust solid polymer electrolytes for use in multifunctional structural batteries10.1021/cm070213o ↗
3. Improving multifunctional behavior in structural electrolytes through copolymerization of structure- and conductivity-promoting monomers10.1016/j.polymer.2009.07.050 ↗
4. Multifunctional structure–battery composites for marine systems10.1177/0021998312460262 ↗
5. Mechanical design and performance of composite multifunctional materials10.1016/j.actamat.2004.01.007 ↗
6. Barium titanate and barium strontium titanate coated carbon fibers for multifunctional structural capacitors10.1177/0021998312449029 ↗
7. Fabrication and characterization of thermally drawn fiber capacitors10.1063/1.4802783 ↗
8. Carbon-fiber/polymer-matrix composites as capacitors10.1016/S0266-3538(00)00166-4 ↗
9. Structural capacitor materials made from carbon fibre epoxy composites10.1016/j.compscitech.2010.02.028 ↗
10. Evaluation of commercially available carbon fibers, fabrics, and papers for potential use in multifunctional energy storage applications10.1149/1.3065070 ↗
11. Multifunctional structural supercapacitor composites based on carbon aerogel modified high performance carbon fibre fabric10.1021/am400947j ↗
12. Multifunctional structural supercapacitors for electrical energy storage applications
13. Multifunctional structural power and energy composites for US army applications
14. Metal foams as flow field and gas diffusion layer in direct methanol fuel cells10.1016/j.jpowsour.2006.12.008 ↗
15. Design and performance of multifunctional structural composite capacitors10.1177/0021998311412207 ↗
16. O’Brien · 2010
17. The effect of specimen size on the electric breakdown of unfilled and filled epoxy polymers10.1109/TEI.1976.297917 ↗
18. Tandon · 1997
19. Effect of interlayer air on performance of dry-type metalized film capacitor in DC, AC and pulsed applications10.1109/TDEI.2011.5976131 ↗
20. Influences of degree of curing and presence of inorganic fillers on the ultimate electrical properties of epoxy-based composites: experiment and simulation10.1088/0022-3727/38/1/023 ↗
21. Effect of metal–polymer interface on the breakdown electric field of poly(vinylidene fluoride–trifluoroethylene–chlorofluoroethylene) terpolymer10.1063/1.2768205 ↗
22. Experimental investigation on the role of electrodes in solid dielectric breakdown under nanosecond pulses10.1109/TDEI.2012.6259976 ↗
23. Relationship between electrode surface roughness and impulse breakdown voltage in vacuum gap of Cu and Cu–Cr electrodes10.1109/TDEI.2003.1219640 ↗
24. Garet C. Personal communication. Dayville, CT: Bollore, Inc.; 2008.
25. Bauccio · 1993
26. Baechle · 2007
27. ASTM International. ASTM standard D 792 – 00. Standard test methods for density and specific gravity (relative density) of plastics by displacement. West Conshohocken, PA; 2000.
28. Standard · 2004
29. Study on self-healing and lifetime characteristics of metallized-film capacitor under high electric field10.1109/TPS.2012.2200699 ↗
30. Summary of Properties for Kapton® Polyimide Films. DuPont Inc. Available from: http://www.dupont.com/content/dam/assets/products-and-services/membranes-films/assets/DEC-Kapton-summary-of-properties.pdf (accessed May 2014).
31. Callister · 1994
32. Rheological and thermal study of the curing process of a cycloaliphatic epoxy resin: application to the optimization of the ultimate thermomechanical and electrical properties10.1088/0022-3727/46/6/065301 ↗
33. Yurchak · 2012
34. Status quo and future prospects for metallized polypropylene energy storage capacitors10.1109/TPS.2002.805318 ↗
35. Effect of the electrode work function on the water plasma breakdown voltage10.1016/j.cap.2011.04.005 ↗
36. Wetz D, Mankowski J, McCauley D, Dickens J, Kristiansen M. The impact of water conductivity, electrode material, and electrode surface roughness on the pulsed breakdown strength of water. In: Proceedings of the 27th international power modulator symposium and 2006 high voltage workshops, 2006. p. 104–7.10.1109/MODSYM.2006.365192 ↗
37. Carter · 1991
38. Stress generation by solvent absorption and wrinkling of a cross-linked coating atop a viscous or elastic base10.1021/la060551o ↗
39. A new mechanism for the formation of ply wrinkles due to shear between plies10.1016/j.compositesa.2013.03.002 ↗
40. Mechanisms of wrinkle formation during the processing of composite laminates10.1016/S0266-3538(98)00080-3 ↗
41. Dielectric breakdown process of polymers10.1109/TEI.1980.298314 ↗
42. Polymer composite and nanocomposite dielectric materials for pulse power energy storage10.3390/ma2041697 ↗