journal article·2023-06Open access

Flat glass fibres: The influence of fibre cross section shape on composite micromechanics and composite strength

James L. Thomason

Abstract

Many of the fibres used in composite reinforcement have a non-circular cross section and recently non-circular glass fibre products have become commercially available. This paper explores the potential effects that such non-circular fibre shapes may have on the micro-mechanics of stress transfer at the fibre–matrix interface and the resulting changes in composite strength performance. Analytical modelling is used to show how the critical fibre length in composites with non-circular fibres is always less when compared to circular fibres with an equal cross sectional area. This can result in significant changes to the strength performance of discontinuous fibre reinforced composites. Additionally it is shown that non-circularity in fibre cross section can have important consequences for the use of single fibre micromechanical tests in the characterisation of interfacial strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Brosius D. In defense of glass fiber. Composites World May 2016. https://www.compositesworld.com/articles/in-defense-of-glass-fiber.
2. Mazumdar S, Pichler D, Benevento M, Seneviratine W, Liang R, Witten E. 2020 State of the Industry Report. Compos Manuf January 3, 2020. https://compositesmanufacturingmagazine.com/2020/01/2020-state-of-the-industry-report/.
3. Melt-spun non-circular carbon fibers10.1016/0008-6223(86)90271-X ↗
4. High resolution transmission electron microscopy study on polyacrylonitrile/carbon nanotube based carbon fibers and the effect of structure development on the thermal and electrical conductivities10.1016/j.carbon.2015.05.037 ↗
5. Micro-computed tomography-aided modeling for misaligned and noncircular fibers of unidirectional composites and validation under a transverse tensile loading10.1016/j.compscitech.2021.108879 ↗
6. Identification of the optimal carbon fiber shape for cost-specific compressive performance
7. Experimental and numerical evaluation of effects of kidney-shape carbon fiber on transverse cracking of carbon fiber reinforced plastics10.1016/j.compositesa.2021.106690 ↗
8. Effects of aspect ratios of ellipsoidal inclusions on elastic stress transfer of ceramic composites10.1111/j.1151-2916.1989.tb06132.x ↗
9. Scatter in tensile properties of flax fibre bundles: influence of determination and calculation of the cross-sectional area10.1007/s10853-016-0052-z ↗
10. Random short sisal fiber biocomposites: Optimal manufacturing process and reliable theoretical models10.1016/j.matdes.2018.03.070 ↗
11. Analysis of the morphometric variations in natural fibres by auto-mated laser scanning: towards an efficient and reliable assessment of the cross-sectional area10.1016/j.compositesa.2018.02.018 ↗
12. Influence of the anisotropy of sisal fibers on the mechanical properties of high performance unidirectional biocomposite lamina and micromechanical models
13. Modelling the influence of fibre internal structure on the measured modulus of technical natural fibres10.1016/j.compositesa.2021.106478 ↗
14. Comparison of Experimental and Calculated Tensile Properties of Flax Fibres10.3390/jcs6040100 ↗
15. Fibre cross-section determination and variability in sisal and flax and its effects on fibre characterisation10.1016/j.compscitech.2011.03.007 ↗
16. Natural fibre cross sectional area, its variability and effects on the determination of fibre proper-ties10.1166/jbmb.2012.1231 ↗
17. Modulus and strength prediction for natural fibre composites10.1179/1743284712Y.0000000022 ↗
18. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus10.1016/1359-835X(95)00065-A ↗
19. The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: Part 3 strength and strain at failure10.1016/1359-835X(96)00066-8 ↗
20. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact properties10.1016/S1359-835X(96)00127-3 ↗
21. Comparison of methods for the measurement of fibre/matrix adhesion in composites10.1016/0010-4361(92)90282-Y ↗
22. Single fibre fragmentation test for assessing adhesion in fibre reinforced composites10.1023/A:1004351606897 ↗
23. A proposal to modify the Kelly-Tyson equation to calculate the interfacial shear strength (IFSS) of composites with low aspect ratio fibers10.1016/j.compscitech.2019.107920 ↗
24. Reducing warp in thermoplastics with bilobe glass fibers
25. Huey LJ, Beuther PD. Method and apparatus for making non-circular mineral fibers. US Patent 4,636,234; 1987.
26. https://www.nittobo.co.jp/eng/business/glassfiber/frtp/hisff.htm.
27. https://www.neg.co.jp/en/product/e-flat_list/.
28. http://en.cpicfiber.com/index.php/index/listproducts/s/106/c/53.
29. Influence of fibre cross-sectional aspect ratio on mechanical properties of glass fibre/epoxy composites I. Tensile and flexure behaviour10.1016/S0266-3538(98)00168-7 ↗
30. Influence of fibre cross-sectional aspect ratio on mechanical properties of glass-fibre/epoxy composites II. Interlaminar fracture and impact behaviour10.1016/S0266-3538(99)00033-0 ↗
31. Injection Molding of Flat Glass Fiber Reinforced Thermoplastics10.1142/S0217979210065258 ↗
32. A Study on Properties of the Glass Fiber Reinforced PPS Composites for Automotive Headlight Source Module10.7234/composres.2016.29.5.293 ↗
33. Mechanical characteristics of gf/recycled PET thermoplastic composites with chopped fiber according to cross section
34. Characteristic evaluation and finite element analysis of glass fiber/recycled polyester thermoplastic composites by cross-sectional shape of glass fiber10.1016/j.compositesb.2021.109095 ↗
35. Glass fibre sizing: A review10.1016/j.compositesa.2019.105619 ↗
36. Thomason JL., Glass fibre sizing: a review of size formulation patents. Blurb Inc. 2015, ISBN 9780957381438.
37. The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene:5. Injection moulded long and short fibre pp10.1016/S1359-835X(02)00179-3 ↗
38. Tensile properties of fibre-reinforced metals10.1016/0022-5096(65)90035-9 ↗
39. Micromechanical Parameters from Macromechanical Measurements on glass reinforced polyamide 6,610.1016/S0266-3538(01)00062-8 ↗
40. Nanocomposite toughness, strength and stiffness: role of filler geometry10.1179/2055033214Y.0000000002 ↗
41. Thomason JL. The influence of fibre cross section shape and fibre surface roughness on composite micromechanics. Submitted to Micro 2023.10.3390/micro3010024 ↗
42. On the Application of Weibull Analysis to Experimentally Determined Single Fibre Strength Distributions10.1016/j.compscitech.2013.01.009 ↗
43. Glass fibre strength distribution determined by common experimental methods10.1016/S0266-3538(01)00182-8 ↗
44. The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. The properties of injection moulded long fibre PP at high fibre content10.1016/j.compositesa.2006.01.007 ↗
45. Glass-fiber reinforced resin molded articles and a method for producing the same
46. An investigation of glass-fiber reinforced polyamide 66 during conditioning in various automotive fluids10.1002/pc.21160 ↗
47. The influence of fibre length, diameter and concentration on the strength and strain to failure of glass-fibre reinforced polyamide 6,610.1016/j.compositesa.2008.07.002 ↗
48. Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection moulded glass fibre reinforced polybutylene terephthalate composites10.1016/S0014-3057(01)00033-7 ↗