journal article·2022-08

Platen parallelism significance and control in single fiber transverse compression tests

Jason Govilas, Violaine Guicheret-Retel, Fabien Amiot, Johnny Beaugrand, Vincent Placet, Cédric Clévy

Publisher page

Abstract

Transverse compression tests are the established way to identify the transverse mechanical properties of singlefibers. However, to the authors knowledge, the influence of an angle between the two compression platens hasnever been studied or quantified. In this paper, the importance of platen parallelism is studied for the first timethrough: numerical simulation and experimental investigation. A sensitivity analysis complements these studiesby highlighting the importance of contact geometry in the analytical model, used in the inverse identification ofthe fiber’s apparent transverse elastic modulus ET . Experimental results show that a misalignment of 1◦ betweenthe platens produces a variation of more than 35% on the identified ET , compared to a compression with parallelplatens. Given the importance of platen misalignment angle an experimental setup and protocol are designed inorder to maintain this angle below 0.1◦, thus keeping the error on ET below 5%
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Vibration and Dynamic Analysis · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Ballistic impact mechanisms – a review on textiles and fibre-reinforced composites impact responses10.1016/j.compstruct.2019.110966 ↗
2. Towards the design of high-performance plant fibre composites10.1016/j.pmatsci.2018.05.005 ↗
3. Unidirectional compression of fibre reinforcements. part 1: a non-linear elastic-plastic behaviour10.1016/j.compscitech.2006.08.017 ↗
4. The transverse compression of anisotropic fibre monofilaments
5. 39—the determination of the lateral-compression modulus of fibres10.1080/00405006808660016 ↗
6. The transverse compression of oriented nylon and polyethylene extrudates10.1007/BF00553190 ↗
7. Transverse compressive moduli and yield behavior of some orthotropic, high-modulus filaments10.1177/004051757404401203 ↗
8. Measurement of the transverse mechanical properties of high-performance fibres10.1080/00405009008658721 ↗
9. Experimental investigation of the transverse mechanical properties of a single Kevlar® KM2 fiber10.1016/j.ijsolstr.2004.05.016 ↗
10. Experimental study of the transverse mechanical properties of polyamide 6.6 monofilaments10.1007/s10853-006-0655-x ↗
11. The measurement of transverse mechanical properties of polymer fibres10.1007/BF00349946 ↗
12. Transverse compression of PPTA fibers. part I. fiber transverse structure10.1023/A:1004716108638 ↗
13. Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing10.1002/polb.23763 ↗
14. Transverse compression behavior of Kevlar KM2 single fiber10.1016/j.compositesa.2015.11.032 ↗
15. On the transverse compression response of Kevlar KM2 using fiber-level finite element model10.1016/j.ijsolstr.2014.03.020 ↗
16. New test method for evaluating internal stress due to compression of concrete (the splitting tension test)(part 1)
17. Carneiro F. A new method to determine the tensile strength of concrete. Pap Present 5th Meet Brazilian Assoc Tech Rules 1943.
18. The brazilian disc test for rock mechanics applications: review and new insights10.1007/s00603-012-0257-7 ↗
19. Suggested methods for determining tensile strength of rock materials - 1. suggested method for determining direct tensile strength10.1016/0148-9062(78)90003-7 ↗
20. Uniaxial compression tests and the validity of indirect tensile strength10.1007/BF03372161 ↗
21. An analysis of the factors influencing the data derived from a plug type three-dimensional strain rosette under compression and torsion10.1111/j.1475-1305.2005.00230.x ↗
22. The lateral deformation of cross-linkable PPXTA fibres10.1023/A:1018672400459 ↗
23. Transverse compressive properties of polyacrylonitrile (PAN)-based and pitch-based single carbon fibers10.1016/j.carbon.2017.03.031 ↗
24. Transverse compression of two high-performance ballistic fibers10.1177/0040517515592814 ↗
25. The mechanics of rigid irregular particles subject to uniaxial compression10.1680/geot.10.P.102 ↗
26. Continuous mechanical indexing of single-cell spheroids10.1109/LRA.2019.2923976 ↗
27. Compression test system for a single submicrometer particle10.1063/1.2038187 ↗
28. Transverse compression of PPTA fibers. part II. fiber transverse structure10.1023/A:1004716108638 ↗
29. Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates10.1016/S0378-4754(00)00270-6 ↗
30. Transverse compressive properties of natural fibers determined using micro mechatronic systems and 2D full-field measurements10.1016/j.matpr.2020.01.383 ↗
31. Design of large-displacement compliant joints10.1115/1.1900149 ↗
32. Hull R. Properties of Crystalline Silicontle. London : INSPEC, the Institution of Electrical Engineers; n.d.
33. 2D visual micro-position measurement based on intertwined twin-scale patterns10.1016/j.sna.2016.08.002 ↗
34. Mathematical contributions to the theovy of evolution.—III. heredity, and panmixia10.1098/rsta.1896.0007 ↗
35. Huitson A, Dunn OJ, Clark VA. Applied Statistics: Analysis of Variance and Regression. vol. 25. New York: Wiley; 1976. Doi: 10.2307/2987845.10.2307/2987845 ↗