journal article·2010-06

Biaxial experimental determination of in-plane matrix fracture envelope of unidirectional composite

L. Greve, C. Bisagni, C.L. Walters

Publisher page

Abstract

Abstract A test procedure for the determination of the in-plane fracture envelope of unidirectional fibre reinforced polymers (FRP) is presented. In particular, the determined fracture envelope covers combined in-plane shear and transverse (perpendicular to the fibre direction) matrix strength. The proposed test procedure allows the manufacture of specimens for material fracture characterisation in the same way that real composite structures are usually produced for the automotive industry. The biaxial testing is performed using a custom-made dual actuator test machine and keeping the ratio of transverse and shear load constant until fracture. The experimentally obtained transverse–shear strength relation can be well represented by the matrix fracture model by Puck. It is shown that the stress concentrations in the gauge section of the flat biaxial specimens can be avoided by the introduction of a thickness reduction, whereas the stress concentrations within biaxial specimens without such a thickness reduction lead to significantly lower strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Puck A, Schürmann H. Die Zug/Druck-Torsionsprüfung an rohrförmigen Probekörpern. 18 Öffentliche Jahrestagung der Arbeitsgemeinschaft Verstärkte Kunststoffe e.V., Freuden-stadt, 5-7.10.1982. Sonderdruck der Zeitschrift Kunststoffe 1982;72(9):554–61 [in German].
2. Kopp JW. Zur Spannungs- und Festigkeitsanalyse von unidirektionalen Faserverbundkunststoffen. IKV Berichte aus der Kunststoffverarbeitung, Band 99;2000. ISBN 3-89653-438-6 [in German].
3. Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data10.1016/S0266-3538(02)00093-3 ↗
4. A method to produce uniform plane stress states with applications to fibre reinforced materials10.1007/BF02324146 ↗
5. Greve L. Damage and failure modelling of carbon/epoxy non crimp fabric composites. PhD Thesis, Cranfield University; 2005.
6. A new experimental technique for the multi-axial testing of advanced high strength steel sheets10.1007/s11340-007-9053-9 ↗
7. Bai Y. Effect of loading history on necking and fracture. PhD Thesis, Massachusetts Institute of Technology; 2008.
8. Experimental investigation of the damage propagation in composite specimens under biaxial loading10.1016/j.compstruct.2007.10.029 ↗
9. Failure analysis of FRP laminates by means of physically based phenomenological models10.1016/S0266-3538(01)00208-1 ↗
10. Daniel IM, Ishai O. Engineering mechanics of composite materials. Oxford University Press, Inc.; 1994. ISBN 0-19-507506-4.
11. Walters CL. Development of a punching technique for ductile fracture testing over a wide range of stress states and strain rates. PhD Thesis, MIT; 2009.
12. Virtual Performance Solutions. Explicit solver reference and notes manuals (PAM-CRASH), ESI Group. .
13. Advances in two-dimensional and three-dimensional computer vision, photomechanics10.1007/3-540-48800-6_10 ↗