journal article·2026-02Open access

An experimental study and analysis of the geometrical properties of mesoscopic buckle defects

C.O. Ndukwe, S. Allaoui, J. Paux, W. Zouari, M. Assarar

Abstract

This study investigates the shape and other geometrical features of out-of-plane buckle defects in woven-glass fabrics. A dedicated laboratory device, operated according to a specific protocol, was developed to create calibrated buckle defects under optimal conditions. Several plain-woven fabric samples were prepared by gradually adjusting the device to deform glass fabric specimens, increasing the shear angle in the lateral regions of the buckling defect zone to generate different buckle amplitudes. The geometry of the deformed specimens was extensively characterised at the mesoscopic level using 3D surface scanning and 3D X-ray tomography. To this end, comprehensive data on the geometric properties of the yarns on both sides of the deformed reinforcements were extracted and analysed. The results reveal significant changes in yarn geometry, such as changes in the ellipticity parameters, with decreases up to 30 % in the major axis and increases up to 28 % in the minor axis and decreases up to 10 % in the yarn cross-sectional area. Additionally, the variation in geometric properties emphasises that tooling contact plays a crucial role in shaping the buckled yarn and deciding its out-of-plane rotation, which ultimately influences the performance of the composite.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Greb C, Lenz C, Lengersdorf M, Gries T. 18 - Fabrics for reinforcement of engineering composites. In: Miao M, Xin JH, editors. Engineering of High-Performance Textiles, Woodhead Publishing; 2018, p. 489–512. Doi: 10.1016/B978-0-08-101273-4.00019-6.10.1016/B978-0-08-101273-4.00019-6 ↗
2. An experimental study of mechanisms behind wrinkle development during forming of composite laminates10.1016/j.compositesa.2013.03.013 ↗
3. Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear, and bending stiffnesses10.1016/j.compscitech.2011.01.011 ↗
4. Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming10.1016/j.compositesa.2020.106248 ↗
5. Composite preforming defects: a review and a classification10.1007/s12289-021-01643-7 ↗
6. Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures10.1016/j.compositesa.2008.04.016 ↗
7. Damage progression and defect sensitivity: an experimental study of representative wrinkles in tension10.1016/j.compositesb.2012.05.021 ↗
8. Davidson P, Waas A, Yerramalli C, Chandraseker K, Faidi W. Effect of waviness on the compressive strength of unidirectional carbon composites. 2012. Doi: 10.2514/6.2012-1422.10.2514/6.2012-1422 ↗
9. The effect of face sheet wrinkle defects on the strength of FRP sandwich structures10.1177/1099636207069250 ↗
10. Influences of in-plane and out-of-plane waviness on the mechanical properties of carbon composite laminate10.1177/0731684418765981 ↗
11. Compression testing of continuous reinforced polymer composites with out-of-plane waviness and circular notches10.1016/j.polymertesting.2014.02.004 ↗
12. Influences of wrinkles induced by tows’ offset in automated placement on the bending properties of composites10.1016/j.compstruct.2022.115964 ↗
13. Effect of reinforcement shear and mesoscopic defects on the low velocity impact of a GFRP10.1007/s12289-019-01521-3 ↗
14. Effect of mesoscopic out-of-plane defect on the fatigue of a GFRP10.1016/j.mechmat.2017.11.008 ↗
15. Development of an experimental bench to reproduce the tow buckling defect appearing during the complex shape forming of structural woven composite reinforcements10.1016/j.compositesa.2015.10.011 ↗
16. Complex shape forming of flax woven fabrics: design of specific blank-holder shapes to prevent defects10.1016/j.compositesb.2014.02.007 ↗
17. Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignment defect10.1016/j.compositesa.2013.03.017 ↗
18. Experimental, analytical and numerical investigation to prevent the tow buckling defect during fabric forming10.1016/j.compositesa.2019.105567 ↗
19. Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement10.1007/s12289-012-1116-5 ↗
20. Different experimental ways to minimise the preforming defects of multi-layered interlock dry fabric10.1007/s12289-018-1407-6 ↗
21. Effect of sliding on the quality of multilayer interlock dry fabric preforms10.1016/j.compositesa.2014.10.017 ↗
22. Development and implementation of an experimental machine to study woven fabric preforming defects
23. Shanwan A. Experimental study of woven fabrics forming defects. 2023. Doi: 10.21741/9781644902479-41.10.21741/9781644902479-41 ↗
24. Experimental investigation of vegetal and synthetic fabrics cohesion in order to prevent the tow sliding defect via frictional and pull-out test10.1016/j.compositesa.2020.106083 ↗
25. The relation between in-plane waviness severity and first ply failure in thermoplastic composite laminates10.1016/j.compstruct.2022.115374 ↗
26. Defects in woven preforms: Formation mechanisms and the effects of laminate design and layup protocol10.1016/j.compositesa.2013.04.004 ↗
27. Coupled meso-macro simulation of woven fabric local deformation during draping10.1016/j.compositesa.2019.01.004 ↗
28. An experimental study of in-plane large shear deformation of woven fabric composite10.1016/j.compscitech.2006.08.011 ↗
29. Unit-cell geometry in plain-weave fabrics during shear deformations10.1016/S0266-3538(96)00136-4 ↗
30. Ivanov DS, Vangestel C, Lomov SV, Verpoest I. In-situ measurements of fabric thickness evolution during draping and compressibility of sheared fabrics, 2011, p. 924–9.10.1063/1.3589634 ↗
31. Experimental and numerical analysis of wrinkling during forming of multi-layered textile composites10.1016/j.compstruct.2018.10.018 ↗
32. Softonic International S. A. ImageJ v1.8.0 [software], 2024. https://imagej.net/ij/download.html n.d.