Past, present and future prospective of global carbon fibre composite developments and applications
Source abstract
Abstract
Carbon fibre and carbon fibre reinforced polymer matrix composites (CFRPs) are important lightweight materials for aerospace, automotive, rail transport, infrastructure, and renewable energy applications. This paper provides a comprehensive review on the history of carbon fibres and carbon fibre composites, the current global CFRPs consumption, and trends for future developments in the aerospace, wind turbine, automotive, pressure vessels, sports and leisure, and construction sectors. The history of carbon fibres and CFRPs is discussed over four representative periods including their early development (1950–60's), growth of carbon fibre composites industry (1970–80's), major adoption of carbon fibre composites (the first wave, 1990–2000's), and expanded use of carbon fibre composites (the second wave, 2010's and beyond). Despite a 37% decline of carbon fibre consumption in the aerospace industry in 2021 caused by COVID-19, the global CFRP demand was around 181 kt which more than doubled its value in 2014. There is tangible projected increase over the next five years and the demand for CFRPs is expected to reach 285 kt in 2025, mainly attributed from the fast expansion of non-aerospace industries such as the wind energy sector. Lower cost carbon fibres (e.g., large tow) and associated manufacturing technologies are continually evolving. Finally, the implications of emerging materials and manufacturing methods in conjunction with recycling and reuse for carbon fibre composites are discussed. © 2022 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Graphene research and applications · Graphite, nuclear technology, radiation studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Goddard · 2021
2. Volkova · 2020
3. Lin · 2021
4. Watt · 1966
5. Carbon fibres of high strength and high breaking strain10.1038/213690a0 ↗
6. 2022
7. Mitsubishi Materials. Changing the world with new materials. A half-century history of CFRP.
8. Engels · 2014
9. Characterisation of composites for wind turbine blades10.1016/S0034-3617(12)70111-X ↗
10. 2020
11. Malnati · 2021
12. Ennis · 2019 · 1
13. Current status of carbon fibre and carbon fibre composites recycling10.1016/j.compositesb.2020.108053 ↗
14. Continuous manufacturing of CFRP sheets by rolling for rapid fabrication of long CFRP products10.1016/j.compositesb.2020.107896 ↗
15. Lin · 2022
16. Fibre reinforced composites in aircraft construction10.1016/j.paerosci.2005.02.004 ↗
17. Marino · 2014
18. Leading the way in thermoplastic composites10.1016/j.repl.2015.08.067 ↗
19. Using composite materials in aircraft10.1063/1.5133186 ↗
20. Eco-efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry10.1016/j.ast.2018.06.020 ↗
21. Composite materials and their damage detection using AI techniques for aerospace application: a brief review10.1016/j.matpr.2020.11.005 ↗
22. Advances in composite manufacturing of helicopter parts
23. Bouchard · 2020
24. Shama Rao · 2018 · 1
25. Spreading of heavy tow carbon fibers for the use in aircraft structures
26. Study on the resin infusion process based on automated fiber placement fabricated dry fiber preform10.1038/s41598-019-43982-1 ↗
27. Placement suitability criteria of composite tape for mould surface in automated tape placement10.1016/j.cja.2015.06.002 ↗
28. Impregnation quality diagnosis in resin transfer moulding by machine learning10.1016/j.compositesb.2021.108973 ↗
29. A highly interpretable materials informatics approach for predicting microstructure-property relationship in fabric composites10.1016/j.compscitech.2021.109080 ↗
30. Evolution laws of fiber-matrix interface cracks in machining of carbon fiber reinforced polymer
31. Optimal filler content for cotton fiber/PP composite based on mechanical properties using artificial neural network10.1016/j.compstruct.2020.112654 ↗
32. Optimum stacking sequences of thick laminated composite plates for maximizing buckling load using FE-GAs-PSO10.1016/j.compstruct.2016.09.085 ↗
33. Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies10.1016/j.carbon.2018.10.028 ↗
34. The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties10.1016/j.jmatprotec.2007.06.052 ↗
35. Effect of thermal characteristics of commercial and special polyacrylonitrile fibres on the fabrication of carbon fibres10.1179/174328406X129887 ↗
36. Dikici · 2016
37. Manufacturing carbon fibres from pitch and polyethylene blend precursors: a review10.1016/j.jmrt.2020.05.037 ↗
38. Preparation and characterization of mesophase pitch via co-carbonization of waste polyethylene/petroleum pitch10.1016/j.jmst.2015.07.010 ↗
39. Recent progress in fabrication, structure, and properties of carbon fibers10.1080/15583724.2012.705410 ↗
40. Microstructure of mesophase pitch-based carbon fiber and its control10.1016/0008-6223(95)00172-7 ↗
41. Narrow-porous pitch-based carbon fibers of superior capacitance properties in aqueous electrolytes10.1016/j.electacta.2015.03.153 ↗
42. Flexural strengthening of steel bridges with high modulus CFRP Strips10.1061/(ASCE)1084-0702(2008)13:2(192) ↗
43. A revolution in low-cost carbon fiber production10.1016/j.repl.2017.11.003 ↗
44. Facile method to fabricate carbon fibers from textile-grade polyacrylonitrile fibers based on electron-beam irradiation and its effect on the subsequent thermal stabilization process10.1016/j.carbon.2017.03.039 ↗
45. Low cost textile-grade carbon-fiber epoxy composites for automotive and wind energy applications10.1016/j.compositesb.2020.108156 ↗
46. LeMond to develop new carbon fibre production facility after successful tests
47. Lee · 2021
48. Hill · 2021
49. GE unveils Haliade-X: the world's largest offshore wind turbine, powered by 107-meter-long LM blades
50. Aeroservoelastic design definition of a 20 MW common research wind turbine model10.1002/we.1970 ↗
51. Downwind pre-aligned rotors for extreme-scale wind turbines10.1002/we.2092 ↗
52. Fichaux · 2011
53. Wetzel · 2011
54. 2015
55. Trends in the design, manufacture and evaluation of wind turbine blades10.1002/we.90 ↗
56. Development of a compressive failure model for carbon fiber composites and associated uncertainties10.1016/j.compscitech.2021.108855 ↗
57. 2020
58. Optimization of composite material tower for offshore wind turbine structures10.1016/j.renene.2019.03.101 ↗
59. Tension-tension fatigue performances of a pultruded carbon fiber reinforced epoxy plate at elevated temperatures10.1016/j.compstruct.2019.02.062 ↗
60. 2021
61. Murray · 2017
62. Office of Energy Efficiency & Renewable Energy · 2021
63. Overview of CFRP (carbon fiber reinforced plastics) application to future automobiles
64. Overview of automotive structural composites technology developments in Japan10.1016/j.compscitech.2017.09.015 ↗
65. Application of carbon fiber reinforced plastics in automotive industry: a review
66. Quasi-static and dynamic characterization of unidirectional non-crimp carbon fiber fabric composites processed by HP-RTM10.1016/j.polymertesting.2019.03.036 ↗
67. Valdes-Dapena · 2021
68. Biggest hurdles for automotive composites
69. A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks10.1016/j.ijhydene.2019.08.001 ↗
70. Design of a 70 MPa type IV hydrogen storage vessel using accurate modeling techniques for dome thickness prediction10.1016/j.compstruct.2020.111915 ↗
71. The markets: pressure vessels (2021)
72. Yamashita · 2015
73. Development of high pressure gaseous hydrogen storage technologies10.1016/j.ijhydene.2011.02.125 ↗
74. Application of filament winding technology in composite pressure vessels and challenges: a review10.1016/j.est.2021.103468 ↗
75. Progress in research on composite cryogenic propellant tank for large aerospace vehicles10.1016/j.compositesa.2021.106297 ↗
76. Performance of fiber reinforced materials under cryogenic conditions—a review10.1016/j.compositesa.2020.106226 ↗
77. Technological implementation of a toroidal composite pressure vessel for hydrogen storage
78. A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage10.1016/j.ijhydene.2016.10.039 ↗
79. Fitzer · 1985 · 251
80. Strengthening methods for reinforced concrete infrastructure using FRP composites in Korea10.1680/jstbu.17.00057 ↗
81. Flexural experiment and capacity investigation of CFRP repaired RC beams under heavy pre-damaged level10.1016/j.conbuildmat.2019.117030 ↗
82. Retrofitting seismically damaged steel sections encased concrete composite walls using externally bonded CFRP strips10.1016/j.compstruct.2020.111927 ↗
83. Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridges10.1016/j.compstruct.2010.01.023 ↗
84. Properties and applications of FRP cable on long-span cable-supported bridges: a review10.1016/j.compositesb.2020.107934 ↗
85. Chapter 7 - types of composites10.1016/B978-0-12-375049-5.00007-4 ↗
86. Thermal management of a Li-ion battery using carbon fiber-PCM composites10.1016/j.applthermaleng.2015.02.068 ↗
87. Improving thermal conductivity in the through-thickness direction of carbon fibre/SiC composites by growing vertically aligned carbon nanotubes10.1016/j.carbon.2017.01.103 ↗
88. Continuous and rapid stabilization of polyacrylonitrile fiber bundles assisted by atmospheric pressure plasma for fabricating large-tow carbon fibers10.1016/j.carbon.2015.07.012 ↗
89. A comprehensive chemical model for the preliminary steps of the thermal stabilization process in a carbon fibre manufacturing line10.1039/C8RE00164B ↗
90. Effects of drawing process on the structure and tensile properties of textile-grade PAN fiber and its carbon fiber10.1515/epoly-2013-0080 ↗
91. Effects of ultraviolet irradiation on stabilization of textile-grade polyacrylonitrile fibers without photo-initiator for preparing carbon fibers10.1016/j.carbon.2018.12.012 ↗
92. Carbon composites continue to find new markets10.1016/j.repl.2016.12.060 ↗
93. First study on using heavy tow fibers for textile preform processes in the aerospace industry
94. Numerical and experimental study of internal flow field for a carbon fiber tow pneumatic spreader10.1007/s11663-001-0056-0 ↗
95. The spread of spread tow
96. Lateral spreading of a fiber bundle via mechanical means10.1177/0021998311424624 ↗
97. Biron · 2018
98. Thermoplastic polymer composites production by automated fiber placement method10.4028/www.scientific.net/KEM.836.78 ↗
99. Investigation on the thermo-oxidative stability of carbon fiber sizings for application in thermoplastic composites10.1016/j.polymdegradstab.2015.12.016 ↗
100. Recent advances in carbon-fiber-reinforced thermoplastic composites: a review10.1016/j.compositesb.2017.12.007 ↗