journal article·2019-01

Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing

Bandar AlMangour, Young-Kyun Kim, Dariusz Grzesiak, Kee-Ahn Lee

Publisher page

Abstract

Abstract Selective laser melting (SLM) is an emerging additive manufacturing process for fabricating multifunctional parts by locally melting and consolidating powders in a layer-by-layer manner. Its flexibility enables the development of new alloys and metal matrix composites with unique, fine microstructures and complex-shaped components that are all difficult to realize with traditional manufacturing processes. This study investigates how TiB2 nanoparticle reinforcements affect the microstructure and high-temperature deformation behavior of a 316L stainless steel matrix. In SLM-processed pure stainless steel, fully directional columnar grains were observed, whereas TiB2 nanoparticles added to the steel matrix significantly reduced the sizes of the molten pools and grains and disrupted the directional structures. A chemical analysis revealed no compositional difference between the boundary and interior of the molten pool areas of the SLM-processed TiB2/316L nanocomposites, suggesting that elements did not segregate macroscopically. However, for higher TiB2 contents, alloying elements microsegregated at the boundaries of cellular structures due to the particle accumulation structure mechanism. Transmission electron microscopy confirmed the existence of mostly cube-like TiB2 nanoparticles both at the boundaries and in the interiors of the cellular structures. The nanocomposites exhibited high compressive yield strength and ductility at room and high temperatures, except at 600 °C, where embrittlement was observed. Observing the microstructure and flow stress of nanocomposites deformed at 700 and 800 °C shed light on the dynamic recovery and dynamic recrystallization phenomena. However, several conventional strengthening mechanisms could not predict the entire yield strength increase. Thus, a novel microsegregation strengthening mechanism was presented to explain the effect of TiB2 on the refined microstructure, and the novel microsegregation phenomenon and the enhanced mechanical properties were correlated. Hence, the SLM process shows high potential for fabricating new materials with outstanding properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Effect of thermal oxidation conditions on tribological behaviour of titanium films on 316L stainless steel10.1016/j.surfcoat.2004.10.102 ↗
2. Direct laser cladding of SiC dispersed AISI 316L stainless steel10.1016/j.triboint.2008.10.016 ↗
3. Sliding wear of stainless steel matrix composite reinforced with TiB 2 particles10.1016/S0167-577X(99)00123-8 ↗
4. Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties10.1002/adem.200700106 ↗
5. Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting10.1016/j.jallcom.2016.04.156 ↗
6. Chawla · 2006
7. Gibson · 2014
8. Additive manufacturing technologies–Rapid prototyping to direct digital manufacturing10.1108/aa.2012.03332baa.010 ↗
9. Campanelli · 2010
10. A review of additive manufacturing10.5402/2012/208760 ↗
11. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
12. Defining the tensile properties of Al-12Si parts produced by selective laser melting10.1016/j.actamat.2016.12.044 ↗
13. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
14. Strategy of fabrication of complex shape parts based on the stability of single laser melted track
15. Microstructure and tensile properties of iron parts fabricated by selective laser melting10.1016/j.optlastec.2013.09.017 ↗
16. Enhancing strength and ductility of magnesium by integrating it with aluminum nanoparticles10.1016/j.actamat.2007.07.039 ↗
17. Metal matrix composites reinforced by nano-particles—a review10.3390/met4010065 ↗
18. Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting10.1016/j.matdes.2017.10.039 ↗
19. Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting10.1016/j.scriptamat.2014.10.011 ↗
20. Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments
21. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
22. Selective laser melting additive manufacturing of Ti-based nanocomposites: the role of nanopowder10.1007/s11661-013-1968-4 ↗
23. Rapid in situ fabrication of Fe/SiC bulk nanocomposites by selective laser melting directly from a mixed powder of microsized Fe and SiC10.1016/j.scriptamat.2013.11.031 ↗
24. Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting10.1016/j.jallcom.2013.06.087 ↗
25. Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: microstructure, element distribution, crack and mechanical properties10.1016/j.jmatprotec.2015.02.010 ↗
26. Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development10.1016/j.jmatprotec.2009.06.012 ↗
27. Selective laser melting of TiB2/316L stainless steel composites: the roles of powder preparation and hot isostatic pressing post-treatment10.1016/j.powtec.2016.12.073 ↗
28. Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites10.1016/j.jallcom.2017.08.022 ↗
29. Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: influence of starting TiC particle size and volume content10.1016/j.matdes.2016.05.018 ↗
30. Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting10.1016/j.msea.2017.11.126 ↗
31. Instability of scan tracks of selective laser sintering of high speed steel powder10.1016/S1359-6462(99)00276-6 ↗
32. A Multiscale understanding of the thermodynamic and kinetic mechanisms of laser additive manufacturing10.1016/J.ENG.2017.05.011 ↗
33. Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: experimental and simulation methods10.1016/j.jmatprotec.2018.01.028 ↗
34. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
35. Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: simulation and experiments10.1016/j.matdes.2013.10.006 ↗
36. Effect of TiB2 particles on the tribological properties of stainless steel matrix composites10.1007/s40195-013-0002-6 ↗
37. Effects of rare earth metals on steel microstructures10.3390/ma9060417 ↗
38. Additive manufacturing of a 316L steel matrix composite reinforced with CeO2 particles: process optimization by adjusting the laser scanning speed10.3390/technologies6010025 ↗
39. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
40. Humphreys · 2012
41. The effects of turbulence on molten pool transport during melting and solidification processes in continuous conduction mode laser welding of copper–nickel dissimilar couple10.1016/j.applthermaleng.2009.06.018 ↗
42. Solidification microstructures and solid-state parallels: recent developments, future directions10.1016/j.actamat.2008.10.020 ↗
43. Saeidi · 2016
44. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
45. The role of microstructure and surface finish on the corrosion of selective laser melted 304L10.1149/2.0431805jes ↗
46. Saeidi · 2018 · vol. 5 · 172394
47. Peckner · 1977
48. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
49. Calmunger · 2014 · 49
50. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
51. Flow behavior and microstructural evolution during hot deformation of AISI Type 316 L (N) austenitic stainless steel10.1016/j.msea.2011.08.012 ↗
52. Annealing behavior of the ODS nickel-based superalloy PM 100010.1016/j.msea.2003.11.052 ↗
53. Hary · 2017
54. Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility10.1016/j.actamat.2017.02.062 ↗
55. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect10.1016/j.msea.2011.10.043 ↗
56. Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates10.1016/j.jallcom.2007.05.038 ↗
57. Hall-Petch strengthening in nanocrystalline metals10.1016/0921-5093(93)90319-A ↗
58. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
59. Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel10.1016/j.matlet.2014.07.188 ↗
60. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗