journal article·2014-12

Effects of carbon nanotubes and carbon fiber reinforcements on thermal conductivity and ablation properties of carbon/phenolic composites

Joung-Man Park, Dong-Jun Kwon, Zuo-Jia Wang, Jeong-U Roh, Woo-Il Lee, Jong-Kyoo Park, K. Lawrence DeVries

Publisher page

Abstract

Abstract The ablation properties and thermal conductivity of carbon nanotube (CNT) and carbon fiber (CF)/phenolic composites were evaluated for different filler types and structures. It was found that the mechanical and thermal properties of phenolic-polymer matrix composites were improved significantly by the addition of carbon materials as reinforcement. The concentrations of CF and CNT reinforcing materials used in this study were 30 vol% and 0.5 wt%, respectively. The thermal conductivity and thermal diffusion of the different composites were observed during ablation testing, using an oxygen–kerosene (1:1) flame torch. The thermal conductivity of CF mat/phenolic composites was higher than that of random CF/phenolic composites. Both CF mat and CNT/phenolic composites exhibited much better thermal conductivity and ablation properties than did neat phenolic resin. The more conductive carbon materials significantly enhanced the heat conduction and dissipation from the flame location, thereby minimizing local thermal damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Flame retardant materials and properties · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Ankush B, Subrata R, Ryan G. Pyrolysis gas flow in thermally ablating media using time-implicit discontinuous Galerkin methods. In: 49th American Institute of Aeronautics and Astronautics Aerospace Sciences Meeting & Exhibit, Jan. 2011.
2. Ahn HK, Park C, Sawada K. Dynamics of pyrolysis gas in charring materials ablation. In: 36th Aerospace Sciences Meeting & Exhibit, Jan. 1998.10.2514/6.1998-165 ↗
3. Response of heatshield material at stagnation point of pioneer-venus probes10.2514/2.6697 ↗
4. Modelling of carbon–carbon composite ablation in rocket nozzles10.1016/j.compscitech.2010.04.002 ↗
5. Effect of combustion gas mass flow rate on carbon/carbon composite nozzle ablation in a solid rocket motor10.1016/j.carbon.2011.11.034 ↗
6. Microstructural interpretation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites10.1016/S0266-3538(00)00212-8 ↗
7. Ablation properties of C/C–Sic composites tested on an arc heater10.1016/j.solidstatesciences.2011.09.010 ↗
8. Investigation of laser pulse fatigue effect on unpainted and painted CFRP structures10.1016/j.compositesb.2013.10.051 ↗
9. Analysis of laser ablation of CFRP by ultra short laser pulses with short wavelength10.1016/j.phpro.2011.03.071 ↗
10. Effect of density and fibre orientation on the ablation behavior of carbon–carbon composites10.1016/S1872-5805(09)60023-8 ↗
11. Enhancement of ablative and interfacial bonding properties of EPDM composites by incorporating epoxy phenolic resin10.1016/j.compositesb.2013.05.005 ↗
12. Ablation, mechanical and thermal conductivity properties of vapor grown carbon fiber/phenolic matrix composites10.1016/S1359-835X(01)00092-6 ↗
13. Ablation behavior of SiC fiber/carbon matrix composites under simulated atmospheric reentry conditions10.1016/j.compositesa.2010.10.015 ↗
14. Heat transfer mechanism of the C/SiC ceramics pyramidal lattice composites10.1016/j.compositesb.2014.03.015 ↗
15. Microstructure and ablation performances of dual-matrix carbon/carbon composites10.1016/j.carbon.2006.01.017 ↗
16. Ablative properties of carbon black and MWNT/phenolic composites: a comparative study10.1016/j.compositesa.2011.10.006 ↗
17. Carbon nanotubes as structural material and their application in composites10.1016/j.compositesb.2011.05.011 ↗
18. Effect of ablation at different regions in three-dimensional orthogonal C/SiC composites ablated by oxyacetylene torch at 180°C10.1016/j.jmatprotec.2008.08.002 ↗
19. Texture structure and ablation behavior of TaC coating on carbon/carbon composites10.1016/j.apsusc.2010.07.064 ↗
20. Novel phenolic impregnated 3-D fine-woven pierced carbon fabric composite: microstructure and ablation behavior10.1016/j.compositesb.2011.12.001 ↗
21. Ablation of carbon based materials: multiescale roughness modelling10.1016/j.compscitech.2008.09.019 ↗
22. High strain rate behavior and failure mechanism of tree-dimensional five-directional carbon/phenolic braided composites under transverse compression10.1016/j.compositesb.2010.11.011 ↗
23. Optimum dispersion conditions and interfacial modification of carbon fiber and CNT–phenolic composites by atmospheric pressure plasma treatment10.1016/j.compositesb.2012.01.025 ↗
24. Thermal and ablative properties of low temperature carbon fiber-phenol formaldehyde resin composites10.1016/S0008-6223(02)00063-5 ↗