Micro- and nanoparticle mineral coating for enhanced properties of carbon multifilament yarn cement-based composites
Source abstract
Abstract
Abstract The reinforcing efficiency of Textile-Reinforced Concrete (TRC) is often limited by the low penetrability of the cement products into the inner fibers of the multifilament, leading to premature failure of the composite due to low bonding strength. Usually, polymer coatings are applied to carbon yarns to improve their bond properties. However, such coatings are sensitive to elevated temperatures and, in many cases, also to moist and alkaline environments (ageing) and, consequently, the composite material does not perform according to expectations. This paper presents an investigation aimed at improving control of the bonding of carbon multifilament yarn to a cement-based matrix by means of inorganic particle coatings. A carbon multifilament yarn was impregnated by micro- and nano-silica fillers and compared to conventional epoxy-polymer-coated yarns in terms of pullout behavior and microstructure morphology. The micro-silica filler coating proved to be the most efficient, enhancing both pullout strength and toughness, well beyond the effects induced by the nano-silica and epoxy coatings. The superior performance of the micro-silica coating is attributed to the high degree of impregnation of the inter-fiber space by the particles and to the pozzolanic reactions of the silica particles, promoting the formation of beneficial nanocrystalline products within the multifilament yarn. The nano-silica did not show the same effect due to extensive agglomeration and subsequent coating segmentation during the coating's drying process. Although the epoxy polymer effectively coated the fibers, the low penetration of cement hydration products into the yarn resulted in inferior bonding strength compared to that obtained by using the micro-silica coating. It may be concluded that the coating of multifilament yarns with mineral fillers offers an efficient option for improving the performance of TRC materials. As such, it is recommended to use pozzolan particles that disperse well and effectively impregnate the yarns, filling in the bundle spaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Brameshuber · 2006
2. Fabric structure and its reinforcing efficiency in textile reinforced cement composites10.1016/S1359-835X(03)00003-4 ↗
3. Tensile behavior of fabric cement-based composites: pultruded and cast10.1061/(ASCE)0899-1561(2007)19:4(340) ↗
4. Effect of interfacial properties on the crack propagation in cementitious composites10.1016/S1065-7355(96)90078-4 ↗
5. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
6. Novel cement-based composites for the strengthening and repair of concrete structures10.1016/j.conbuildmat.2012.11.117 ↗
7. Bond between textile-reinforced mortar (TRM) and concrete substrates: experimental investigation10.1016/j.compositesb.2016.05.041 ↗
8. Experimental investigations on the durability of fibre–matrix interfaces in textile-reinforced concrete10.1016/j.cemconcomp.2009.02.005 ↗
9. Shear strengthening of full-scale RC T-beams using textile-reinforced mortar and textile-based anchors10.1016/j.compositesb.2016.03.076 ↗
10. Mechanical characterization of Engineered Cement-based Composites prepared with hybrid fibres and expansive agent10.1016/j.compositesb.2016.05.051 ↗
11. Flexural performance of cementitious composites reinforced with woven fabrics10.1061/(ASCE)0899-1561(1999)11:4(325) ↗
12. Effect of nanofillers and production methods to control the interfacial characteristics of glass bundles in textile fabric cement-based composites10.1016/j.compositesa.2012.01.022 ↗
13. Influence of bundle coating on the tensile behavior, bonding, cracking and fluid transport of fabric cement-based composites10.1016/j.cemconcomp.2013.05.005 ↗
14. Modelling of ageing effects on crack-bridging behaviour of AR-glass multifilament yarns embedded in cement-based matrix10.1016/j.cemconres.2011.01.007 ↗
15. Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I: fibre properties and durability10.1016/j.compscitech.2008.11.027 ↗
16. Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete II: water adsorption and composite interphases10.1016/j.compscitech.2008.12.020 ↗
17. Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete10.1016/j.cemconcomp.2014.01.007 ↗
18. Zamir M, Dvorkin, D. and Peled, A. Fabric cement-based composites with nanoparticles filler, interfacial characteristics. In: Proceedings of 3rd International RILEM Conference on Strain Hardening Cementitious Composites (SHCC3). Dordrecht Nederland Conference, Conference 2014. p. 171–8.
19. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
20. The critical role of nanotube shape in cement composites10.1016/j.cemconcomp.2016.05.012 ↗
21. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
22. WS2 nanotube – reinforced cement: dispersion matters10.1016/j.conbuildmat.2015.08.085 ↗
23. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
24. Reinforcing effects of graphene oxide on Portland cement paste10.1061/(ASCE)MT.1943-5533.0001125 ↗
25. The role of surfactants in dispersion of carbon nanotubes10.1016/j.cis.2006.11.007 ↗
26. Characteristics of cement mortar with nano-SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
27. Engineering of SiO2 nanoparticles for optimal performance in nano cement-based materials
28. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
29. Effectiveness of polycarboxylate superplasticizers in ultra-high strength concrete: the importance of PCE compatibility with silica fume10.3151/jact.7.5 ↗
30. Controlled telescopic reinforcement system of fabric–cement composites — durability concerns10.1016/j.cemconres.2010.06.003 ↗
31. Graphene nanoribbon – polymer composites: the critical role of edge functionalization10.1016/j.carbon.2015.12.039 ↗
32. Mindess · 2003
33. Modifying carbon rowing-cement matrix bond by inorganic coating
34. Taylor · 1997