Multifunctional epoxy composites with highly flame retardant and effective electromagnetic interference shielding performances
Source abstract
Abstract
Abstract Multifunctional epoxy composites with low flammability, high ablation resistance, superior electrical conductivity and outstanding electromagnetic interference (EMI) shielding performances are prepared by a two-step procedure. The first step involves pyrolysis of lignin-resorcinol-glyoxal pre-polymer into carbon foams, while the second step is infiltrating flame retardant epoxy resins (FREP) into the highly porous carbon foams. SEM images show that the three-dimensional network microstructure of carbon foams is integrally preserved during infiltration by the epoxy resins, which could serve as an effective pathway for electron transport. For the flame-retardant carbon foam/epoxy (FREP-CF) composite, a UL-94 V-0 classification is achieved. In the cone calorimeter measurement, the peak heat release rate and the total heat release of the FREP-CF composite are reduced by 64% and 37%, respectively, compared to those of the original epoxy resin. The FREP-CF composite can resist approximately 1000 °C flame for 10 min with the temperature on the back side lower than 200 °C, which is much better than the EP-CF composite. Additionally, a notable electrical conductivity of 216 S/m and a superior EMI shielding effectiveness of 33.5 dB are achieved for the FREP-CF composite. This multifunctional epoxy composite enables it a promising candidate for electronics, aerospace and transportation applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Flame retardant materials and properties · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Hierarchical polyphosphazene@molybdenum disulfide hybrid structure for enhancing the flame retardancy and mechanical property of epoxy resins10.1021/acsami.7b08878 ↗
2. Flame retardancy and thermal degradation mechanism of epoxy resin composites based on a DOPO substituted organophosphorus oligomer10.1016/j.polymer.2010.03.053 ↗
3. Synthesis and characterization of a DOPO-substitued organophosphorus oligomer and its application in flame retardant epoxy resins10.1016/j.porgcoat.2010.12.013 ↗
4. Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through layered copper phenylphosphate10.1016/j.compscitech.2017.10.013 ↗
5. Facile construction of one-component intrinsic flame-retardant epoxy resin system with fast curing ability using imidazole-blocked bismaleimide10.1016/j.compositesb.2019.107380 ↗
6. Benzimidazolyl-substituted cyclotriphosphazene derivative as latent flame-retardant curing agent for one-component epoxy resin system with excellent comprehensive performance10.1016/j.compositesb.2019.107440 ↗
7. Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation10.1016/j.eurpolymj.2011.02.008 ↗
8. Synthesis of a phosphorus/nitrogen-containing compound based on maleimide and cyclotriphosphazene and its flame-retardant mechanism on epoxy resin10.1016/j.polymdegradstab.2016.01.011 ↗
9. Synergistic flame-retardant effect of expandable graphite and phosphorus-containing compounds for epoxy resin: strong bonding of different carbon residues10.1016/j.polymdegradstab.2016.03.017 ↗
10. Synthesis of a novel flame retardant containing phosphorus, nitrogen and boron and its application in flame-retardant epoxy resin10.1016/j.polymdegradstab.2016.09.023 ↗
11. Effect of a triazine ring-containing charring agent on fire retardancy and thermal degradation of intumescent flame retardant epoxy resins10.1002/pat.1788 ↗
12. Modification of epoxy resin through the self-assembly of a surfactant-like multi-element flame retardant10.1039/C5TA07115A ↗
13. Synthesis of novel boron-containing epoxy–novolac resins and properties of cured products10.1002/pola.21726 ↗
14. Improved flame resistance and thermo-mechanical properties of epoxy resin nanocomposites from functionalized graphene oxide via self-assembly in water10.1016/j.compositesb.2019.01.086 ↗
15. Cardanol derived benzoxazine in combination with boron-doped graphene toward simultaneously improved toughening and flame retardant epoxy composites10.1016/j.compositesa.2018.10.010 ↗
16. Carbon-family materials for flame retardant polymeric materials10.1016/j.progpolymsci.2017.02.001 ↗
17. Multifunctional intercalation in layered double hydroxide: toward multifunctional nanohybrids for epoxy resin10.1039/C5TA09482H ↗
18. Simultaneously improving the fire safety and mechanical properties of epoxy resin with Fe-CNTs via large-scale preparation10.1039/C7TA10961J ↗
19. Highly thermally conductive flame retardant epoxy nanocomposites with multifunctional ionic liquid flame retardant-functionalized boron nitride nanosheets10.1039/C8TA08008A ↗
20. Thermal exfoliation of hexagonal boron nitride for effective enhancements on thermal stability, flame retardancy and smoke suppression of epoxy resin nanocomposites via sol–gel process10.1039/C6TA01565D ↗
21. Two-dimensional cardanol-derived zirconium phosphate hybrid as flame retardant and smoke suppressant for epoxy resin10.1016/j.polymdegradstab.2018.03.006 ↗
22. Self-assembly of Ni–Fe layered double hydroxide/graphene hybrids for reducing fire hazard in epoxy composites10.1039/c3ta00035d ↗
23. The influence of single-walled carbon nanotube structure on the electromagnetic interference shielding efficiency of its epoxy composites10.1016/j.carbon.2007.04.016 ↗
24. Electromagnetic interference shielding MWCNT-Fe3O4@Ag/epoxy nanocomposites with satisfactory thermal conductivity and high thermal stability10.1016/j.carbon.2018.10.003 ↗
25. Flexible graphene/polymer composite films in sandwich structures for effective electromagnetic interference shielding10.1016/j.carbon.2013.08.043 ↗
26. Effect of electrophoretic condition on the electromagnetic interference shielding performance of reduced graphene oxide-carbon fiber/epoxy resin composites10.1016/j.compositesb.2016.08.042 ↗
27. Phenolic resin-based composite sheets filled with mixtures of reduced graphene oxide, γ-Fe2O3 and carbon fibers for excellent electromagnetic interference shielding in the X-band10.1016/j.carbon.2012.04.030 ↗
28. High-performance epoxy nanocomposites reinforced with three-dimensional carbon nanotube sponge for electromagnetic interference shielding10.1002/adfm.201503782 ↗
29. Carbon materials and their composites for electromagnetic interference shielding effectiveness in X-band10.1016/j.carbon.2019.06.002 ↗
30. Lignin-derived advanced carbon materials10.1002/cssc.201500692 ↗
31. Carbon foams produced from lignin-phenol-formaldehyde resin for oil/water separation10.1016/S1872-5805(17)60109-4 ↗
32. Phenolic resin-enhanced three-dimensional graphene aerogels and their epoxy nanocomposites with high mechanical and electromagnetic interference shielding performances10.1016/j.compscitech.2017.09.022 ↗
33. Highly conductive and fracture-resistant epoxy composite based on non-oxidized graphene flake aerogel10.1021/acsami.8b13415 ↗
34. Lightweight and flexible graphene foam composites for high-performance electromagnetic interference shielding10.1002/adma.201204196 ↗
35. Lightweight and anisotropic porous MWCNT/WPU composites for ultrahigh performance electromagnetic interference shielding10.1002/adfm.201503579 ↗
36. Iminophosphorane–phosphines: versatile ligands for homogeneous catalysis10.1016/j.jorganchem.2013.07.009 ↗
37. Progress in the Raman spectra analysis of covalently functionalized multiwalled carbon nanotubes: unraveling disorder in graphitic materials10.1039/C5CP06519D ↗
38. Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites10.1039/c2jm35479a ↗
39. Heat release and structural collapse of flexible polyurethane foam10.1016/j.polymdegradstab.2010.02.019 ↗
40. Surface-coating engineering for flame retardant flexible polyurethane foams: a critical review10.1016/j.compositesb.2019.107185 ↗
41. Eco-friendly flame retardant and electromagnetic interference shielding cotton fabrics with multi-layered coatings10.1016/j.cej.2019.05.012 ↗
42. Engineering nanostructures by decorating magnetic nanoparticles onto graphene oxide sheets to shield electromagnetic radiations10.1021/acsami.5b02703 ↗
43. Electromagnetic interference shielding performance of epoxy composites filled with multiwalled carbon nanotubes/manganese zinc ferrite hybrid fillers10.1016/j.jmmm.2015.10.067 ↗
44. Electromagnetic interference shielding of graphene/epoxy composites10.1016/j.carbon.2008.12.038 ↗
45. New antistatic charge and electromagnetic shielding effectiveness from conductive epoxy resin/plasticized carbon black composites10.1002/pc.20334 ↗
46. Magnetic and electrically conductive epoxy/graphene/carbonyl iron nanocomposites for efficient electromagnetic interference shielding10.1016/j.compscitech.2015.08.023 ↗
47. Superior electromagnetic interference shielding 3D graphene nanoplatelets/reduced graphene oxide foam/epoxy nanocomposites with high thermal conductivity10.1039/C8TC05955A ↗
48. Modified carbon fiber/magnetic graphene/epoxy composites with synergistic effect for electromagnetic interference shielding over broad frequency band10.1016/j.jcis.2017.07.020 ↗
49. Electrical conductivity and electromagnetic interference shielding of epoxy nanocomposite foams containing functionalized multi-wall carbon nanotubes10.1016/j.apsusc.2017.08.234 ↗
50. Electrified single-walled carbon nanotube/epoxy nanocomposite via vacuum shock technique: effect of alignment on electrical conductivity and electromagnetic interference shielding10.1002/pc.24632 ↗
51. Interface decoration of exfoliated MXene ultra-thin nanosheets for fire and smoke suppressions of thermoplastic polyurethane elastomer10.1016/j.jhazmat.2019.04.026 ↗
52. MXene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions10.1016/j.jhazmat.2019.120952 ↗
53. Black phosphorous nanosheets: a novel solar vapor generator10.1002/solr.201900537 ↗
54. Renewable cardanol-based surfactant modified layered double hydroxide as a flame retardant for epoxy resin10.1021/acssuschemeng.5b00871 ↗
55. Renewable cardanol-based phosphate as a flame retardant toughening agent for epoxy resins10.1021/acssuschemeng.7b00062 ↗
56. Design of reduced graphene oxide decorated with DOPO-phosphanomidate for enhanced fire safety of epoxy resin10.1016/j.jcis.2018.02.054 ↗
57. Self-assembly followed by radical polymerization of ionic liquid for interfacial engineering of black phosphorus nanosheets: enhancing flame retardancy, toxic gas suppression and mechanical performance of polyurethane10.1016/j.jcis.2019.11.114 ↗
58. Construction of multifunctional boron nitride nanosheet towards reducing toxic volatiles (CO and HCN) generation and fire hazard of thermoplastic polyurethane10.1016/j.jhazmat.2018.09.009 ↗
59. Construction of multifunctional MoSe2 hybrid towards the simultaneous improvements in fire safety and mechanical property of polymer10.1016/j.jhazmat.2018.03.003 ↗
60. Strengthening, toughing and thermally stable ultra-thin MXene nanosheets/polypropylene nanocomposites via nanoconfinement10.1016/j.cej.2019.122267 ↗
61. A liquid phosphorus-containing imidazole derivative as flame-retardant curing agent for epoxy resin with enhanced thermal latency, mechanical, and flame-retardant performances10.1016/j.jhazmat.2019.121984 ↗
62. A bio-based ionic complex with different oxidation states of phosphorus for reducing flammability and smoke release of epoxy resins10.1016/j.coco.2019.11.011 ↗