journal article·2018-07

On crashing behaviors of aluminium/CFRP tubes subjected to axial and oblique loading: An experimental study

Guangyong Sun, Shunfeng Li, Guangyao Li, Qing Li

Publisher page

Abstract

Abstract Thin-walled energy-absorbing structures rarely experience in pure axial loading in real crash events, but rather a combination of axial and off-axial loads. In this perspective, it is critical to understand the oblique crushing process of thin-walled structures. To address this issue, circular aluminum and carbon fiber reinforced plastics (CFRP) tubes were experimentally investigated for characterizing their crashworthiness subject to quasi-static axial and oblique compression in this study. The tests were conducted at five different loading angles (θ) of 0°, 5°, 10°, 20° and 30° to the tubal axis. Five sets of specific fixtures were fabricated to apply the desired axial and off-axial loads onto the aluminum and CFRP specimens, respectively. The failure modes, load-displacement curves, crushing force and energy absorption of all the specimens were analyzed; and the effects of loading angle were explored. It is found from the experiments that with the increase in loading angle, aluminum tubes were more prone to collapse in an irregular diamond mode (Id) instead of axisymmetric concertina mode (Ac), while the CFRP tubes collapsed in much more complex failure modes which included splaying mode (Sp), tearing mode (Te), socking mode (So), micro-fragmentation mode (Mf) and catastrophic failure (Cf). As for the energy absorption characteristics, the loading angle (θ) ranged from 0° to 10° had little impact on the energy absorption for the both aluminum and CFRP tubes, nevertheless, the energy absorption of the CFRP tubes decreased more significant from θ = 10° to 30°, while that of aluminum tubes declined fairly steadily.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. On energy absorption of functionally graded tubes under transverse loading10.1016/j.ijmecsci.2016.06.021 ↗
2. Crashworthiness analysis and optimization of sinusoidal corrugation tube10.1016/j.tws.2016.03.029 ↗
3. Axial crushing of thin-walled high-strength steel sections10.1016/j.ijimpeng.2005.07.010 ↗
4. Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes10.1016/j.tws.2004.03.001 ↗
5. Experimental investigation of normal and oblique impacts on CFRPs by high velocity steel sphere10.1016/j.compositesb.2016.06.020 ↗
6. Lightweight design and crash analysis of composite frontal impact energy absorbing structures10.1016/j.compstruct.2011.08.005 ↗
7. Mechanical behavior of composited structure filled with tandem honeycombs10.1016/j.compositesb.2017.01.018 ↗
8. Dynamic crash responses of bio-inspired aluminum honeycomb sandwich structures with CFRP panels10.1016/j.compositesb.2017.03.030 ↗
9. Controllable energy absorption of double sided corrugated tubes under axial crushing10.1016/j.compositesb.2017.09.042 ↗
10. Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes10.1016/j.compstruct.2018.02.005 ↗
11. Classification of the axial collapse of cylindrical tubes under quasi-static loading10.1016/0020-7403(83)90076-0 ↗
12. Static and dynamic axial crushing of square thin-walled aluminium extrusions10.1016/S0734-743X(96)00025-5 ↗
13. On hierarchical honeycombs under out-of-plane crushing10.1016/j.ijsolstr.2017.08.013 ↗
14. Bending characteristics of top-hat structures through tailor rolled blank (TRB) process10.1016/j.tws.2017.10.032 ↗
15. Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures10.1007/s00158-016-1592-1 ↗
16. Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models10.1007/s00158-012-0820-6 ↗
17. Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness10.1016/j.ijmecsci.2016.09.015 ↗
18. On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental10.1016/j.compstruct.2004.07.021 ↗
19. Crush response of CFRP square tube filled with aluminum honeycomb10.1016/j.compositesb.2016.05.048 ↗
20. Lateral crushing and bending responses of CFRP square tube filled with aluminum honeycomb10.1016/j.compositesb.2017.03.021 ↗
21. Experimental study on crashworthiness of empty/aluminum foam/honeycomb–filled CFRP tubes10.1016/j.compstruct.2016.06.019 ↗
22. The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures10.1016/j.compositesb.2016.11.060 ↗
23. Axial energy absorption of CFRP truncated cones10.1016/j.compstruct.2015.04.026 ↗
24. Modeling for CFRP structures subjected to quasi-static crushing10.1016/j.compstruct.2017.09.001 ↗
25. On crushing characteristics of different configurations of metal-composites hybrid tubes10.1016/j.compstruct.2017.04.072 ↗
26. Effect of multi stitched locations on high speed crushing of composite tubular structures10.1016/j.compositesb.2016.06.068 ↗
27. Transverse impact response of filament wound basalt composite tubes10.1016/j.compositesb.2017.01.005 ↗
28. Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses10.1016/S0020-7403(02)00050-4 ↗
29. Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study10.1016/j.ijsolstr.2003.09.053 ↗
30. Off-axis crushing of GFRP tubes10.1016/S0266-3538(02)00152-5 ↗
31. Experimental testing and phenomenological modelling of the fragmentation process of braided carbon/epoxy composite tubes under axial and oblique impact10.1016/j.compositesb.2008.02.002 ↗
32. Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading10.1016/j.tws.2012.05.008 ↗
33. Multiobjective optimization for empty and foam-filled square columns under oblique impact loading10.1016/j.ijimpeng.2012.11.009 ↗
34. Topological configuration analysis and design for foam filled multi-cell tubes10.1016/j.engstruct.2017.10.063 ↗
35. Progressive failure analysis and energy-absorbing experiment of composite tubes under axial dynamic impact10.1016/j.compositesb.2015.10.016 ↗
36. Numerical simulation on windowed tubes subjected to oblique impact loading and a new method for the design of obliquely loaded tubes10.1016/j.ijimpeng.2012.11.005 ↗
37. Effect of buckling initiators on mechanical behavior of thin-walled square tubes subjected to oblique loading10.1016/j.tws.2012.03.002 ↗
38. Origami crash boxes subjected to dynamic oblique loading10.1115/1.4037160 ↗
39. Dynamic axial crushing of origami crash boxes10.1016/j.ijmecsci.2016.09.001 ↗
40. Deformation and energy absorption of aluminum foam-filled tubes subjected to oblique loading10.1016/j.ijmecsci.2011.09.006 ↗
41. Energy absorption mechanics for variable thickness thin-walled structures10.1016/j.tws.2017.04.004 ↗
42. Comparison of functionally-graded structures under multiple loading angles10.1016/j.tws.2015.04.030 ↗
43. A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading10.1016/j.ijimpeng.2014.11.003 ↗
44. Experimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
45. Investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes10.1016/j.compositesb.2016.04.027 ↗
46. Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading10.1016/j.ijmecsci.2017.11.017 ↗
47. Experimental investigation of the collapse modes and energy absorption characteristics of composite tubes10.1080/13588260902792954 ↗
48. On design optimization for structural crashworthiness and its state of the art10.1007/s00158-016-1579-y ↗
49. Parameterization of criss-cross configurations for multiobjective crashworthiness optimization10.1016/j.ijmecsci.2017.02.027 ↗
50. A new multi-objective discrete robust optimization algorithm for engineering design10.1016/j.apm.2017.08.016 ↗
51. Configurational optimization of multi-cell topologies for multiple oblique loads10.1007/s00158-017-1839-5 ↗