journal article·2021-09

Deposition of nanosilica particles on fiber surface for improving interfacial bond and tensile performances of ultra-high-performance fiber-reinforced concrete

Taekgeun Oh, Ilhwan You, Nemkumar Banthia, Doo-Yeol Yoo

Publisher page

Abstract

Abstract This study aimed to improve the interfacial bond and tensile performance of ultra-high-performance concrete (UHPC) containing steel fibers by modifying the fiber surface using an ethylenediaminetetraacetic acid (EDTA) electrolyte solution, cold gas plasma, and nanosilica (SiO2) coating. The test results indicate that the surface roughness of the steel fiber significantly increased because of the chelate effect through the EDTA electrolyte solution and the deposited nanosilica particles. The root mean square roughness, R q , of the plain fiber sample increased by approximately two and nine times owing to the EDTA treatment and nanosilica coating, respectively. The roughened surface was more effective in enhancing the pullout resistance than the increase in surface energy, and the nanosilica coating further increased chemical adhesion and frictional shear stress, significantly increasing bond strengths and pullout energy, owing to the densified interface by the pozzolanic reaction. The tensile performance of UHPC containing steel fibers could be improved by the chelating effect of the EDTA electrolyte solution and nanosilica coating. The EDTA-treated fiber sample with nanosilica coating thus provided the best tensile performance with a tensile strength of 20.3 MPa, strain capacity of 0.99%, and g -value of 159.1 kJ/m3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
2. 2013
3. 2012
4. 2004
5. 2012
6. Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers10.1016/j.compositesb.2016.09.069 ↗
7. Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar10.1016/j.compositesb.2017.02.019 ↗
8. Improvement effect of fiber alignment on resistance to elevated temperature of ultra-high performance concrete10.1016/j.compositesb.2019.107454 ↗
9. Spasojevic · 2008
10. Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading10.1016/j.cemconcomp.2008.09.001 ↗
11. The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)10.1016/j.cemconres.2011.05.009 ↗
12. Investigation of mechanical properties and shrinkage of ultra-high performance concrete: influence of steel fiber contents and shape10.1016/j.compositesb.2019.107021 ↗
13. A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete10.1007/s40069-016-0143-x ↗
14. Flexural behavior of an ultrahigh-performance concrete I-girder10.1061/(ASCE)1084-0702(2008)13:6(602) ↗
15. Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers10.1016/j.compositesb.2013.10.081 ↗
16. Effect of shrinkage-reducing admixture on biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete10.1016/j.conbuildmat.2015.04.040 ↗
17. Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete
18. Performance of deformed steel fibers embedded in ultra-high performance concrete subjected to various pullout rates10.1016/j.cemconres.2016.07.013 ↗
19. High loading-rate pullout behavior of inclined deformed steel fibers embedded in ultra-high-performance concrete10.1016/j.conbuildmat.2017.05.018 ↗
20. Pullout behavior of steel fibers with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing condition10.1016/j.conbuildmat.2019.03.274 ↗
21. Strain-hardening UHP-FRC with low fiber contents10.1617/s11527-010-9650-4 ↗
22. An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers10.1016/j.conbuildmat.2019.02.058 ↗
23. Tension-stiffening effect in steel-reinforced UHPC composites: constitutive model and effects of steel fibers, loading patterns, and rebar sizes10.1016/j.compositesb.2018.09.091 ↗
24. Dynamic pullout behavior of half-hooked and twisted steel fibers in ultra-high-performance concrete containing expansive agents10.1016/j.compositesb.2019.03.022 ↗
25. Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete10.1016/j.compositesb.2018.11.026 ↗
26. Benefits of curvilinear straight steel fibers on the rate-dependent pullout resistance of ultra-high-performance concrete10.1016/j.cemconcomp.2021.103965 ↗
27. Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix10.1016/j.conbuildmat.2010.03.009 ↗
28. Enhancing the low-velocity impact resistance of ultra-high performance concrete by an optimized layered-structure concept10.1016/j.compositesb.2020.108221 ↗
29. Functionally graded ultra-high performance cementitious composite with enhanced impact properties10.1016/j.compositesb.2019.107680 ↗
30. Chelate effect on fiber surface morphology and its benefits on pullout and tensile behaviors of ultra-high-performance concrete10.1016/j.cemconcomp.2020.103864 ↗
31. Performance of oxygen/argon plasma-treated steel fibres in cement mortar10.1016/j.cemconcomp.2018.12.015 ↗
32. Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix10.1016/j.cemconcomp.2019.04.025 ↗
33. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC10.1016/j.conbuildmat.2014.04.007 ↗
34. 2020 · 1
35. Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight steel fibers
36. Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete10.1016/j.cemconcomp.2020.103669 ↗
37. Strength development, hydration reaction and pore structure of autoclaved slag cement with added silica fume10.1016/S0008-8846(96)00196-2 ↗
38. Durability of concrete containing liquid crystal display glass powder for pavement
39. Tensile properties of cracked reactive powder concrete in corrosive environment-effects of crack width and exposure duration10.1016/j.conbuildmat.2020.121635 ↗
40. Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders10.1016/j.cemconres.2003.08.003 ↗
41. Enhancement of adhesion strength between two AISI 316 L stainless steel plates through atmospheric pressure plasma treatment10.1016/j.surfcoat.2005.06.020 ↗
42. Effects of brass coating and nano-SiO2 coating on steel fiber-matrix interfacial properties of cement-based composite10.1016/j.compositesb.2020.107904 ↗
43. Grafting SiO2 nanoparticles on polyvinyl alcohol fibers to enhance the interfacial bonding strength with cement10.1016/j.compositesb.2019.01.034 ↗
44. Fracture mechanics of interfaces10.1557/PROC-114-205 ↗
45. Fiber pullout and bond slip. I: analytical study10.1061/(ASCE)0733-9445(1991)117:9(2769) ↗
46. Liquid crystal display glass powder as a filler for enhancing steel fiber pullout resistance in ultra-high-performance concrete10.1016/j.jobe.2020.101846 ↗
47. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading10.1016/j.cemconcomp.2013.12.015 ↗
48. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC10.1016/j.conbuildmat.2014.04.007 ↗
49. Biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete with different fiber lengths and placement methods10.1016/j.cemconcomp.2015.07.011 ↗
50. Investigation of pozzolanic reaction in nanosilica-cement blended pastes based on solid-state kinetic models and 29Si MAS NMR10.3390/ma9020099 ↗
51. Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix10.1016/0010-4361(90)90005-H ↗
52. Effect of curing relative humidity on mechanical properties of engineered cementitious composites at multiple scales10.1016/j.conbuildmat.2021.122834 ↗