journal article·2023-06Open access

Micro-chemomechanical properties of red mud binder and its effect on concrete

Yue Liu, Yan Zhuge, Xuan Chen, Weiwei Duan, Rong Fan, Luceille Outhred, Lei Wang

Abstract

Red mud is a hazardous waste generated from alumina production, and its safe disposal is a worldwide issue. Although some previous studies have reused red mud in cement-based composites, there is still a lack of research on the nano-scale chemomechanical properties of red mud binders. In this paper, atomic force microscopy with innovative QI™ mode, quantitative backscattered electron image, and quantitative x-ray diffraction analysis are conducted to uncover that Young's modulus of the C-(A)-S-H phase was decreased due to high content of red mud. The high porosity of corresponding binders allowed C-(A)-S-H gel to grow relatively unimpededly, resulting in lower packing density and lower modulus. The incorporation of red mud promoted the formation of aluminium-bearing phases and increased both Al/Ca, Si/Ca, and Fe/Ca ratio of formed C-(A)-S-H gel, especially for calcined red mud. At a moderate replacement ratio, the unreacted red mud enhanced the skeleton of the binder matrix with a filler effect. However, in concrete block samples, the size of red mud was insufficient to transfer the stress over limestone particles to mitigate the weak zones of blocks, and the reactivity of red mud always played a critical factor. Besides, recycling red mud in concrete blocks with a dry mix method overcomes the issue of workability reduction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bauxite Residue and Utilization · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Boosting the use of bauxite residue (red mud) in cement - production of an Fe-rich calciumsulfoaluminate-ferrite clinker and characterisation of the hydration10.1016/j.cemconres.2021.106463 ↗
2. Influence of red mud on mechanical and durability performance of self-compacting concrete10.1016/j.jhazmat.2019.120802 ↗
3. Sustainable iron-rich cements: raw material sources and binder types10.1016/j.cemconres.2022.106834 ↗
4. Hydration of blended cement with high volume iron-rich slag from non-ferrous metallurgy10.1016/j.cemconres.2021.106624 ↗
5. Comprehensive utilization status of red mud in China: a critical review
6. Recent progress of utilization of activated kaolinitic clay in cementitious construction materials10.1016/j.compositesb.2021.108636 ↗
7. Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation10.1016/j.compositesb.2021.109137 ↗
8. Regional waste streams as potential raw materials for immediate implementation in cement production10.3390/ma13235456 ↗
9. Sustainable use of red mud in ultra-high performance concrete (UHPC): design and performance evaluation10.1016/j.cemconcomp.2020.103862 ↗
10. Effect of red mud (bauxite residue) as cement replacement on the properties of self-compacting concrete incorporating various fillers10.1016/j.jclepro.2019.118213 ↗
11. Utilization of red mud derived from bauxite in self-compacting concrete10.1016/j.jclepro.2015.09.049 ↗
12. Unveiling substitution preference of chromium ions in sulphoaluminate cement clinker phases10.1016/j.compositesb.2021.109092 ↗
13. Structural investigation relating to the cementitious activity of bauxite residue — red mud10.1016/j.cemconres.2011.04.004 ↗
14. Microstructure, mineralogy and environmental evaluation of cementitious composites produced with red mud waste10.1016/j.conbuildmat.2013.10.031 ↗
15. Bauxite residue as supplementary cementitious material–efforts to reduce the amount of soluble sodium10.2478/ncr-2020-0001 ↗
16. Utilization of waste from alumina industry to produce sustainable cement-based materials10.1016/j.conbuildmat.2019.116795 ↗
17. Effects of red mud on properties of self-compacting mortar10.1016/j.jclepro.2016.07.052 ↗
18. Influence behavior of phosphorus slag and fly ash on the interface transition zone in concrete prepared by cement-red mud
19. Hydration of fly ash cement10.1016/j.cemconres.2004.09.008 ↗
20. Recycling dredged sediment into fill materials, partition blocks, and paving blocks: technical and economic assessment10.1016/j.jclepro.2018.07.165 ↗
21. Properties and microstructure of concrete blocks incorporating drinking water treatment sludge exposed to early-age carbonation curing10.1016/j.jclepro.2020.121257 ↗
22. Bauxite residue as supplementary cementitious material – efforts to reduce the amount of soluble sodium10.2478/ncr-2020-0001 ↗
23. Identification and geochemical modeling of processes controlling leaching of Cr (VI) and other major elements from chromite ore processing residue10.1016/S0016-7037(02)00977-8 ↗
24. Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation10.1016/j.cemconcomp.2013.01.006 ↗
25. Impact of micromechanics on dynamic compressive behavior of ultra-high performance concrete containing limestone powder10.1016/j.compositesb.2022.110160 ↗
26. Role of nanofillers for high mechanical performance cementitious composites10.1016/j.conbuildmat.2022.126489 ↗
27. Cementitious composites containing alum sludge ash: an investigation of microstructural features by an advanced nanoindentation technology10.1016/j.conbuildmat.2021.124286 ↗
28. Effect of alum sludge ash on the high-temperature resistance of mortar10.1016/j.resconrec.2021.105958 ↗
29. Metha · 2014
30. The C-S-H gel of Portland cement mortars: Part I. The interpretation of energy-dispersive X-ray microanalyses from scanning electron microscopy, with some observations on C-S-H, AFm and AFt phase compositions10.1016/S0008-8846(03)00064-4 ↗
31. Effect of heating rate on decomposition temperature of goethite ore10.1007/s12666-019-01806-w ↗
32. Dehydroxylation of muscovite10.1038/201495a0 ↗
33. Effect of the mechanical activation of nepheline concentrate on its binding properties in mixed cements10.1134/S1070427213070045 ↗
34. The effect of temperature on the hydration rate and stability of the hydration phases of metakaolin–lime–water systems10.1016/S0008-8846(01)00642-1 ↗
35. Compatibility of hydrogarnet, Ca3Al2(SiO4)x(OH)4(3−x), with sulfate and carbonate-bearing cement phases: 5–85 °C10.1016/j.cemconres.2016.01.013 ↗
36. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗
37. Modification of microstructure and physical properties of cement-based mortar made with limestone and alum sludge
38. Sustainable lightweight engineered cementitious composites using limestone calcined clay cement (LC3)10.1016/j.compositesb.2022.110183 ↗
39. Fe-containing phases in hydrated cements10.1016/j.cemconres.2013.12.012 ↗
40. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods10.1016/j.cemconres.2004.04.014 ↗
41. Hydration characteristics of β-C2S in the presence of some pozzolanic materials10.1016/0008-8846(94)90017-5 ↗
42. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
43. Microstructure of cement paste incorporating high volume of low-grade metakaolin10.1016/j.cemconcomp.2019.103453 ↗
44. Property investigation of individual phases in cementitious composites containing silica fume and fly ash10.1016/j.cemconcomp.2014.11.011 ↗
45. The micromechanical signature of high-volume natural pozzolan concrete by combined statistical nanoindentation and SEM-EDS analyses10.1016/j.cemconres.2016.10.004 ↗
46. Modeling the linear elastic properties of Portland cement paste10.1016/j.cemconres.2005.05.001 ↗
47. Australia CaCAo · 1997