journal article·2010-06

The water absorption behaviour of all-polypropylene composites and its effect on mechanical properties

H. Deng, C.T. Reynolds, N.O. Cabrera, N.-M. Barkoula, B. Alcock, T. Peijs

Composites Part B: Engineering· Volume 41· Issue 4
Publisher page

Abstract

Abstract Woven fabric based self-reinforced polypropylene (SRPP) or all-polypropylene (all-PP) composite laminates based on co-extruded tapes were analysed for water uptake and the effect that this had on mechanical properties. Comparisons were made to a commercial glass mat reinforced PP (GMT) and natural fibre mat reinforced PP (NMT). Although the all-PP composites described in this paper can show significant water uptake through the presence of voids between tapes in the crimp region, the amount of which depends on the fabric architecture and level of consolidation, and their mechanical properties are seen to be largely unaffected by water absorption, even after freezing and thawing. Conversely, the NMT used in this investigation demonstrated significant mechanical degradation with increasing water uptake.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. The hot compaction of polypropylene fibres10.1007/BF00353094 ↗
2. The hot compaction of woven polypropylene tapes10.1023/A:1017540530295 ↗
3. Morphological investigation of polypropylene single-fibre reinforced polypropylene model composites10.1016/S0032-3861(00)00660-1 ↗
4. Processing of single polymer composites using the concept of constrained fibers10.1002/pc.20082 ↗
5. The science and technology of hot compaction10.1016/j.polymer.2003.11.050 ↗
6. Cabrera N, Alcock B, Loos J, Peijs T. Processing of all-polypropylene composites for ultimate recyclability. In: Proceedings of the institute of mechanical engineers. J Mater: Des Appl 2004; 218(Part L2): 145–56.10.1177/146442070421800208 ↗
7. On consolidation of self-reinforced polypropylene composites10.1179/174328906X128234 ↗
8. Hot consolidated all-PP composites from textile fabrics composed of isotactic PP filaments with different degrees of orientation10.3144/expresspolymlett.2007.109 ↗
9. Investigation of strain-rate effects in self-reinforced polypropylene composites10.1177/0021998307084173 ↗
10. Flexural creep of all-polypropylene composites: model analysis10.1002/pen.21041 ↗
11. Optimum consolidation of self-reinforced polypropylene composite and its time-dependent deformation behavior10.1016/j.compositesa.2008.06.005 ↗
12. The concept of one polymer composites modelled with high density polyethylenes10.1007/BF00554928 ↗
13. The preparation and tensile properties of polyethylene composites10.1002/app.1978.070221119 ↗
14. Influence of processing conditions on the tensile properties of unidirectional UHMPE fibre/LDPE composites10.1016/0010-4361(94)90029-9 ↗
15. The hot compaction of high modulus melt-spun polyethylene fibres10.1007/BF00357801 ↗
16. Wet powder impregnation for polyethylene composites: preparation and mechanical properties10.1016/S1359-835X(98)00085-2 ↗
17. Flexural and interlaminar mechanical properties of unidirectional liquid crystalline single-polymer composites10.1016/j.compscitech.2006.01.015 ↗
18. Preparation and tensile mechanical properties of unidirectional liquid crystalline single-polymer composites10.1016/j.compscitech.2006.01.012 ↗
19. Dynamic mechanical thermal analysis of all-PP composites based on a and ß polymorphic forms10.1007/s10853-008-2593-2 ↗
20. All-poly(ethylene terephthalate) composites by film stacking of oriented tapes10.1016/j.compositesa.2009.08.008 ↗
21. Impact resistance of all-polypropylene composites composed of alpha and beta modifications10.1016/j.polymertesting.2008.11.011 ↗
22. The hot compaction of polyethylene terephthalate10.1007/BF00356319 ↗
23. Hot compacted polypropylene sheet
24. Hot compaction of polyethylene naphthalate10.1002/app.20517 ↗
25. Hot compaction of woven nylon 6, 6 multifilaments10.1002/app.22771 ↗
26. The mechanical properties of unidirectional all-polypropylene composites10.1016/j.compositesa.2005.07.002 ↗
27. The mechanical properties of woven tape all-polypropylene composites10.1016/j.compositesa.2006.01.003 ↗
28. The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and all-polypropylene composites10.1016/j.compscitech.2006.11.012 ↗
29. The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites10.1016/j.compositesb.2007.03.003 ↗
30. Fatigue properties of highly oriented polypropylene tapes and all-polypropylene composites
31. Filament winding of co-extruded polypropylene tapes for fully recyclable all-polypropylene composite products10.1007/s10443-008-9055-5 ↗
32. Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all-polypropylene composites10.1002/app.24588 ↗
33. Non-isothermal stamp forming of continuous tape reinforced all-polypropylene composite sheet10.1016/j.compositesa.2008.05.014 ↗
34. Direct forming of all-polypropylene composites products from fabrics made of co-extruded tapes10.1007/s10443-009-9081-y ↗
35. Design and manufacture of all-PP sandwich panels based on co-extruded polypropylene tapes10.1016/j.compositesb.2008.03.010 ↗
36. Natural-fibre-mat-reinforced thermoplastic composites based on flax fibres and polypropylene
37. Environmental durability of flax fibres and their composites based on polypropylene matrix10.1023/A:1026581922221 ↗
38. Natural fiber based composites10.1080/10667857.2000.11752892 ↗
39. Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene10.1023/A:1026590124038 ↗
40. Effects of environmental conditions on mechanical and physical properties of flax fibers10.1016/S1359-835X(01)00032-X ↗
41. Low velocity impact performance of recyclable all-polypropylene composites10.1016/j.compscitech.2005.11.010 ↗
42. On the overdrawing of melt-spun isotactic polypropylene tapes10.1002/app.25128 ↗
43. The effect of processing conditions on the mechanical properties and thermal stability of highly oriented PP tapes10.1016/j.eurpolymj.2009.06.025 ↗
44. Springer GS, editor. Environmental effects on composite materials; 1981.
45. Remediation of floating, open water oil-spills-comparative efficacy of commercially available polypropylene sorbent booms10.1007/BF01701571 ↗
46. Needlepunched cotton nonwovens and other natural fibers as oil cleanup sorbents
47. Sea water effects on the fatigue response of polymeric composites
48. Water sorption characteristics of epoxy resin–UHMPE fibers composites10.1002/(SICI)1097-4628(19981024)70:4<747::AID-APP14>3.0.CO;2-U ↗
49. Environmental effects on the mechanical properties of glass–fiber epoxy composite tubular specimens10.1016/j.compscitech.2004.01.017 ↗
50. Schimanski T. High-performance polypropylene structures for eco-friendly, fully recyclable composites, Netherlands: Technische Universiteit Eindhoven. Ph.D. Thesis; 2002.