journal article·2020-03

High-velocity impact onto a high-frictional fabric treated with adhesive spray coating and shear thickening fluid impregnation

YunHo Kim, Sarath Kumar Sathish Kumar, Yurim Park, Hyunseok Kwon, Chun-Gon Kim

Publisher page

Abstract

Abstract The ballistic performance of a bullet-proof fabric can be increased by an increment in the friction between fibres. For enhancement of this performance, numerous studies on the shear thickening fluid (STF)-impregnated fabric have been conducted. The STF as a fluid, however, has inherent shortcomings. Our research aim is to understand and compare experimentally two different bullet-proof fabrics treated with a simple spray coating and STF impregnation. In this study, 71 single yarn pull-out and 90 high-velocity impact experiments were carried out. It was remarkable that the newly proposed Heracron fabric coated with a commercial coating spray increased by more than 90% the energy absorption before penetration, with only less than 15% of add-on weight. It was found that the polymeric anchors created on the fibre produce an exceptionally high level of friction between fibres, according to a microscopic morphological analysis and the single-yarn pull-out experiment. This study revealed the physical explanation of this coating method, showed its feasibility, and considered its effectiveness with excellent results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Textile materials and evaluations · Adhesion, Friction, and Surface Interactions · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Ballistic impact mechanisms - a review on textiles and fibre-reinforced composites impact responses10.1016/j.compstruct.2019.110966 ↗
2. The ballistic impact characteristics of aramid fabrics: the influence of interface friction10.1016/0043-1648(92)90041-6 ↗
3. A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact
4. Structure induced effectiveness of shear thickening fluid for modulating impact resistance of UHMWPE fabrics10.1016/j.compstruct.2018.11.028 ↗
5. Comparative study of P-aramid based soft and stiff composite panels for protective application10.1007/s12221-019-8733-2 ↗
6. Influence of yarn gripping on the ballistic performance of woven fabrics from ultra-high molecular weight polyethylene fibre10.1016/j.compositesb.2014.02.022 ↗
7. Modelling inter-yarn friction in woven fabric armour10.1002/nme.1596 ↗
8. Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabric10.1016/j.ijimpeng.2004.06.008 ↗
9. Finite element analysis of effect of inter-yarn friction on ballistic impact response of woven fabrics10.1016/j.compstruct.2015.08.099 ↗
10. Shear thickening fluids in protective applications: a review10.1016/j.progpolymsci.2017.07.003 ↗
11. Deconstructing the role of shear thickening fluid in enhancing the impact resistance of high-performance fabrics10.1016/j.compositesb.2019.107167 ↗
12. The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives10.1016/j.compositesa.2016.12.019 ↗
13. Empirical study of the high velocity impact energy absorption characteristics of shear thickening fluid (STF) impregnated Kevlar fabric10.1016/j.ijimpeng.2014.05.007 ↗
14. Numerical simulation and empirical comparison of the high velocity impact of STF impregnated Kevlar fabric using friction effects10.1016/j.compstruct.2015.02.041 ↗
15. Computational analysis of shear thickening fluid impregnated fabrics subjected to ballistic impacts10.1080/09243046.2012.690298 ↗
16. Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabric10.1016/j.ijimpeng.2004.06.008 ↗
17. Parametric study of energy absorption mechanism in Twaron fabric impregnated with a shear thickening fluid10.1016/j.ijimpeng.2015.11.016 ↗
18. Behavior of Shear Thickening Fluid (STF) impregnated fabric composite rear wall under hypervelocity impact10.1016/j.compstruct.2018.07.064 ↗
19. Shear thickening fluids in protective applications: a review10.1016/j.progpolymsci.2017.07.003 ↗
20. MMOD puncture resistance of EVA suits with shear thickening fluid (STF) - armortm absorber layers10.1016/j.proeng.2015.04.014 ↗
21. Flexible hypervelocity impact shield by dragon skin bumper and hybrid fabric rear wall
22. Improving the impact resistance of textile structures by using shear thickening fluids: a review10.1080/10408436.2011.613493 ↗
23. Improving the impact resistance performance of Kevlar fabrics using silica based shear thickening fluid10.1016/j.msea.2011.09.021 ↗
24. An investigation on composite laminates including shear thickening fluid under stab condition10.1177/0021998318796158 ↗
25. The effect of graphene on the yarn pull-out force and ballistic performance of Kevlar fabrics impregnated with shear thickening fluids10.1088/1361-665X/aaca4b ↗
26. Improving the impact resistance of p-aramid fabrics by sequential impregnation with shear thickening fluid10.1007/s12221-016-5839-7 ↗
27. Impact resistance of shear thickening fluid/Kevlar composite treated with shear-stiffening gel10.1016/j.compositesa.2017.12.019 ↗
28. The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids10.1016/j.polymertesting.2017.11.003 ↗
29. Engineering enhanced cut and puncture resistance into the thermal micrometeoroid garment (TMG) using shear thickening fluid (STF) - ArmorTM absorber layers10.1016/j.compscitech.2016.06.001 ↗
30. Ballistic performance of p-aramid fabrics impregnated with shear thickening fluid; Part II – effect of fabric count and shot location10.1177/0040517511420765 ↗
31. Development of soft composite materials with improved impact resistance using Kevlar fabric and nano-silica based shear thickening fluid10.1016/j.matdes.2013.07.086 ↗
32. Ballistic performance of p-aramid fabrics impregnated with shear thickening fluid; Part I – effect of laminating sequence10.1177/0040517511420753 ↗
33. Low-velocity impact behaviour of a shear thickening fluid (STF) and STF-filled sandwich composite panels10.1016/j.compscitech.2018.06.013 ↗
34. Empirical study of the high velocity impact energy absorption characteristics of shear thickening fluid (STF) impregnated Kevlar fabric10.1016/j.ijimpeng.2014.05.007 ↗
35. Anti-impact behavior of a novel soft body armor based on shear thickening gel (STG) impregnated Kevlar fabrics
36. Development of oxygen-plasma-surface-treated UHMWPE fabric coated with a mixture of SiC/polyurethane for protection against puncture and needle threats10.3390/fib7050046 ↗
37. Ballistic performance of Kevlar fabric impregnated with nanosilica/PEG shear thickening fluid10.1016/j.compositesb.2018.12.121 ↗
38. Soft body armour development by silica particle based shear thickening fluid coated p-aramid fabrics
39. Effect of a carbon nanotube coating on friction and impact performance of Kevlar10.1007/s10853-015-9088-8 ↗
40. Harpell · 1999
41. Dischler · 2001
42. Hogenboom EHM, Bruinink P. Combinations of polymer filaments or yarns having a low coefficient of friction and filaments or yarns having a high coefficient of friction, and use therefore, US Patent, Editor. Stamicarbon, BV, [Geleen].
43. Catechol and epoxy functionalized ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved surface activity and interfacial adhesion10.1016/j.compscitech.2015.03.017 ↗
44. Multi layered natural rubber coated woven P-aramid and UHMWPE fabric composites for soft body armor application10.1002/pc.24391 ↗
45. Ballistic impact resistance of flexible composites
46. Comparative study of P-aramid based soft and stiff composite panels for protective application10.1007/s12221-019-8733-2 ↗
47. High velocity impact behavior of Kevlar/rubber and Kevlar/epoxy composites: a comparative study10.1016/j.compstruct.2019.02.080 ↗
48. reportHeracron technical report Version 5.0-140924.
49. 2010
50. 2011
51. Testing and modeling of yarn pull-out in plain woven Kevlar fabrics10.1016/j.compositesa.2009.04.019 ↗
52. High-velocity impact performance of shear-thickening fluid/kevlar composites made by the padding process
53. The ballistic impact characteristics of Kevlar woven fabrics impregnated with a colloidal shear thickening fluid10.1023/A:1024424200221 ↗
54. Stacking order effect of hybrid bumper against high-velocity impact