journal article·2020-11

Effects of loading rates on mode I interlaminar fracture toughness of carbon/epoxy composite toughened by carbon nanotube films

Zhouyi Li, Yu Wang, Junchao Cao, Xianghao Meng, Raza Muhammad Aamir, Weibang Lu, Tao Suo

Publisher page

Abstract

Abstract Carbon fiber reinforced resin matrix composites were toughened by the continuous and randomly distributed carbon nanotubes (CNTs), which were fabricated by floating catalytic chemical vapor deposition (FCCVD) method. Toughening was achieved by deploying CNT film of different areal density as interleaves in the carbon fiber reinforced composites. Double cantilever beam (DCB) specimens were adopted in both quasi-static and dynamic fracture tests. The electromagnetic Hopkinson bar was applied to achieve pure type I fracture mode at high loading speeds of 15 m/s and 24 m/s. The effects of CNTs and loading rates on the Mode I fracture toughness of the composites are investigated. It is shown that fracture toughness approaches a maximum value of 626 J/m2 under quasi-static loading, only if a 2-layered CNT film is being applied as an interleave, which is twice that of the neat composite (without CNT interleaves). Under dynamic loading, all the specimens either with or without CNTs show increases in the fracture toughness with the increase in loading rate. Different from the results of quasi-static tests, under dynamic loading conditions, the fracture toughness increases monotonously and approaches to a maximum value of 1380 J/m2 when 40-layered CNT film was applied, which is a remarkable increase of 140% if compared with that of the neat specimen. A detailed analysis of mechanisms responsible for the ameliorating effects of CNTs interleaves is carried out. It is believed that strengthening of interfaces between carbon fibers and matrix, deformation of resin and detachment of CNTs from the matrix are the main factors responsible for this effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Mechanical Behavior of Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Strategic considerations for development of advanced composite technology for large commercial aircraft in China
2. A study on interleaved composites
3. Energy dissipation of stitched and unstitched woven composite materials during dynamic compression test10.1016/j.compositesb.2019.03.023 ↗
4. Pull-out performance of rectangular z-pins in hot-cured carbon fiber reinforced laminates10.1016/j.compstruct.2017.11.080 ↗
5. Analysis of the in-plane shear behaviour of non-orthogonally textile reinforcements: application to braided fabrics10.1016/j.compositesb.2018.07.040 ↗
6. Improvement of the mode I interlaminar fracture toughness of carbon fiber composite reinforced with electrospun nylon nanofiber10.1016/j.compositesb.2019.01.065 ↗
7. Mode II delamination and damage resistance of carbon/epoxy composite laminates interleaved with thermoplastic particles10.1177/0021998306063356 ↗
8. Impact and post-impact properties of multiscale carbon fiber composites interleaved with carbon nanotube sheets10.1016/j.compositesb.2019.107711 ↗
9. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
10. Hybrid carbon fiber-carbon nanotubes reinforced polymer composites: a review10.1016/j.compositesb.2019.107313 ↗
11. Enhanced fracture properties of carbon reinforced composites by the addition of multi-wall carbon nanotubes10.1177/0021998308097735 ↗
12. Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes10.1016/j.matdes.2018.01.051 ↗
13. Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer composites10.1016/j.ijmecsci.2017.06.016 ↗
14. Mode I interlaminar fracture behavior and mechanical properties of CFRPs with nanoclay-filled epoxy matrix10.1016/j.compositesa.2006.03.001 ↗
15. Enhanced dielectric and mechanical properties in chlorine-doped continuous CNT sheet reinforced sandwich polyvinylidene fluoride film10.1016/j.carbon.2016.05.068 ↗
16. Mechanical and electrical properties of laminated composites containing continuous carbon nanotube film interleaves10.1016/j.compscitech.2016.02.032 ↗
17. Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils10.1016/j.compositesa.2019.105477 ↗
18. 2013
19. Effect of the loading rate on mode I interlaminar fracture toughness of laminated composites10.1016/j.engfracmech.2006.05.019 ↗
20. The fracture behavior of structural adhesives under high rates of testing10.1016/j.engfracmech.2009.07.013 ↗
21. Rate dependence of mode I fracture behavior in carbon-fibre/epoxy composite laminates10.1016/S0266-3538(97)00176-0 ↗
22. Determining the toughness of plastically deforming joints10.1023/A:1004370318709 ↗
23. A versatile split Hopkinson pressure bar using electromagnetic loading10.1016/j.ijimpeng.2018.02.002 ↗
24. Loading rate dependency of Mode I interlaminar fracture toughness for unidirectional composite laminates10.1016/j.compscitech.2018.07.040 ↗
25. Symmetric split Hopkinson compression and tension tests using synchronized electromagnetic stress pulse generators10.1016/j.ijimpeng.2018.08.004 ↗
26. Evaluation of a finite element based crack-closure method for calculating static and dynamic strain energy release rates10.1016/0013-7944(90)90043-G ↗
27. Interface enhancement of carbon fiber reinforced methylphenylsilicone resin composites modified with silanized carbon nanotubes10.1016/j.matdes.2015.10.016 ↗
28. Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers10.1016/j.carbon.2012.07.011 ↗
29. On the improvement of toughness of CFRPs with resin doped with CNF and PZT particles10.1016/j.compositesa.2006.04.016 ↗
30. Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils10.1016/j.compscitech.2015.06.021 ↗
31. Quasi-static and dynamic flexural behavior of annealed and chemically strengthened aluminosilicate glass with notch defects10.1016/j.jnoncrysol.2019.119479 ↗
32. Visualization of impact damage in annealed and chemically strengthen aluminosilicate glass10.1016/j.ceramint.2019.06.099 ↗
33. Effects of strain rate on mechanical properties of nanosilica/epoxy10.1016/j.compositesb.2016.04.008 ↗
34. A review of dynamic experimental techniques and mechanical behaviour of rock materials10.1007/s00603-013-0463-y ↗
35. Mode I delamination behaviour of carbon/epoxy composite at different displacement rates10.1016/j.compositesb.2019.107293 ↗