journal article·2019-10

Durability of glass FRCM systems: Effects of different environments on mechanical properties

Jacopo Donnini

Publisher page

Abstract

Abstract Composite systems consisting of fibers in the form of open fabrics embedded within inorganic matrices (Fabric Reinforced Cementitious Matrix, FRCM) have become a well-established technique for strengthening interventions on masonry and concrete structures. In particular, the use of fabrics made of glass fibers coupled with inorganic matrices showed to be very promising, thanks to the high mechanical properties of the fibers, low cost of the raw materials and good compatibility with the substrate, especially in the case of masonry structures. However, the durability of FRCM systems, such as the resistance to salt attack, alkaline environments or moisture, is an issue that hasn't be thoroughly investigated yet. In this study, the effect of saline and 100% Relative Humidity (RH) environments on the mechanical behavior of FRCM systems reinforced with glass fabrics has been investigated. The glass FRCM systems have been studied and characterized considering both the constituent materials (hydraulic mortar and glass fabric) and the substrate (fired clay brick) on which they were applied. Mechanical characterization tests on mortars and fabrics have been performed before and after exposure to different aging conditioning protocols. The same protocols have been adopted for specimens constituted by FRCM strips applied on clay brick substrates, to study the effect of different environments on the shear bond behavior of the composite system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Strengthening of concrete structures with textile reinforced mortars: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000882 ↗
2. FRCM strengthening e a new tool in the concrete and masonry repair toolbox
3. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
4. Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading10.1617/s11527-007-9226-0 ↗
5. Experimental study of adhesion between FRCM and masonry support10.4028/www.scientific.net/KEM.624.189 ↗
6. Bond between TRM versus FRP composites and concrete at high temperatures10.1016/j.compositesb.2017.05.064 ↗
7. A comparison between the use of FRP, FRCM and HPM for concrete confinement10.1016/j.compositesb.2018.12.111 ↗
8. Experimental analysis on bond between PBO-FRCM strengthening materials and concrete10.1016/j.compositesb.2012.03.011 ↗
9. On the effect of curing time and environmental exposure on impregnated Carbon Fabric Reinforced Cementitious Matrix (CFRCM) composite with design considerations10.1016/j.compositesb.2016.12.022 ↗
10. Fabric-reinforced cementitious matrix behavior at high-temperature: experimental and numerical results10.1016/j.compositesb.2016.10.004 ↗
11. TRM versus FRP in flexural strengthening of RC beams: behaviour at high temperatures10.1016/j.conbuildmat.2017.07.195 ↗
12. ACI 549.4 R-13 · 2013
13. Mechanical characterization of different FRCM systems for structural reinforcement10.1016/j.conbuildmat.2017.04.051 ↗
14. Basalt-based fiber-reinforced materials and structural applications in civil engineering10.1016/j.compstruct.2019.02.002 ↗
15. Matrix-fiber bond behavior in PBO FRCM composites: a fracture mechanics approach10.1016/j.engfracmech.2014.01.011 ↗
16. Mechanical characterization of textile reinforced inorganic-matrix composites10.1016/j.compositesb.2017.02.034 ↗
17. Tensile behaviour of glass FRCM systems with fabrics' overlap: experimental results and numerical modeling10.1016/j.compstruct.2019.01.053 ↗
18. Different FRCM systems for shear strengthening of reinforced concrete beams10.1016/j.conbuildmat.2017.07.132 ↗
19. Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets10.1007/s11527-005-9034-3 ↗
20. Experimental investigation on masonry arches strengthened with PBO-FRCM composite10.1016/j.compositesb.2016.05.063 ↗
21. Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes10.1016/j.conbuildmat.2015.04.014 ↗
22. Residual tensile strength of dry and impregnated reinforcement fibres after exposure to alkaline environments10.1016/j.compositesb.2017.03.005 ↗
23. Durability assessment of impregnated Glass Fabric Reinforced Cementitious Matrix (GFRCM) composites in the alkaline and saline environments10.1016/j.conbuildmat.2015.12.173 ↗
24. Durability of fabric reinforced cementitious matrix (FRCM) composites
25. Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: towards an accelerated laboratory test method10.1016/j.conbuildmat.2018.04.164 ↗
26. AC 434-13 · 2013
27. Linea Guida per la identificazione · 2018 · 1
28. Failure modes in FRCM systems with dry and pre-impregnated carbon yarns: experiments and modelling10.1016/j.compositesb.2017.12.024 ↗
29. Silica coating for interphase bond enhancement of carbon and AR-glass Textile Reinforced Mortar (TRM)10.1016/j.compositesb.2017.12.045 ↗
30. Mechanical properties of FRCM using carbon fabrics with different coating treatments10.1016/j.compositesb.2015.11.012 ↗
31. Bond behavior of FRCM carbon yarns embedded in a cementitious matrix: experimental and numerical results10.4028/www.scientific.net/KEM.747.305 ↗
32. Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition10.1617/s11527-010-9586-8 ↗
33. Effect of salt crystallisation on the shear behaviour of masonry walls: an experimental study10.1016/j.conbuildmat.2012.07.086 ↗
34. Durability of steel FRCM-masonry joints: effect of water and salt crystallization10.1617/s11527-017-1070-2 ↗
35. Influence of salt crystallization on composites-to-masonry bond evaluated on site by pull-off tests10.4028/www.scientific.net/KEM.624.338 ↗
36. CNR-DT 215 · 2018
37. 2015 · 1
38. UNI EN 1015-11 · 2007
39. EN 12504-4 · 2004 · 14
40. American Society for Testing and Materials (ASTM) · 1998
41. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
42. 2012
43. Salts in the deterioration of porous materials: an overview10.1179/019713600806113176 ↗
44. Study of the mechanical behavior of masonry repair hydraulic mortars cured and exposed under different conditions10.1016/j.cemconres.2005.12.003 ↗
45. Experimental testing of the durability of hydraulic mortars used for rendering historic buildings10.1016/j.conbuildmat.2011.10.059 ↗
46. Long-term tensile properties of natural fibre-reinforced polymer composites: comparison of flax and glass fibres10.1016/j.compositesb.2016.03.079 ↗
47. RILEM Technical Committee 250-CSM (Gianmarco De Felice) · 2012