Recycling polymer composite granulate/regrind using big area additive manufacturing
Source abstract
Abstract
Carbon fiber filled acrylonitrile butadiene styrene (CF-ABS) is an emerging 3-D printable, recyclable thermoplastic composite. A popular application for CF-ABS is printed molds using large scale additive manufacturing (AM) processes produced for a variety of composites end-users. Other applications have not been fully realized as CF-ABS currently has a higher cost than other polymer composite feedstocks. The cost of CF-ABS could be greatly reduced if recycled CF-ABS material was accepted and utilized industrially, which would further expand its application space. The impacts of mechanical recycling on the properties and performance of CF-ABS after AM or other processes are not yet fully understood. As such, most AM CF-ABS is discarded as waste after use. In this work, AM CF-ABS molds used for concrete castings were recycled using an industrial shredder/granulator system. The granulate was then used as feedstock for large area AM to print test specimens. The elastic moduli in the printing direction and transverse to printing direction after mechanical recycling were found to decrease by 25% and 10%, respectively, most likely caused by reductions in the fiber content and polymer molecular weight. It was found that a significant portion of carbon fiber is lost during mechanical recycling through dust generation, while the thermomechanical extrusion during printing caused the polymer degradation. Although the mechanical performance of CF-ABS was reduced after recycling, the recycled feedstock retained properties for reuse as printed molds using large area AM or another suitable application.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Polymer composite materials: a comprehensive review
2. Egbo · 2020
3. Rehabilitation of the infrastructure using composite materials: overview and applications10.1016/S1018-3639(18)30777-3 ↗
4. Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocity10.1016/j.compositesb.2023.110577 ↗
5. Past, present and future prospective of global carbon fibre composite developments and applications10.1016/j.compositesb.2022.110463 ↗
6. A review of Type V composite pressure vessels and automated fibre placement based manufacturing10.1016/j.compositesb.2023.110573 ↗
7. Rodriguez Lorenzana · 2019
8. Recycling of carbon fiber-reinforced thermoplastic composite wastes from the aerospace industry10.1177/0021998316671796 ↗
9. Mechanical properties of CFRP and CFRTP after recycling
10. Precast concrete molds fabricated with big area additive manufacturing
11. Hassen · 2016
12. Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing10.1016/j.compositesb.2021.109122 ↗
13. Enhanced tensile strength of acrylonitrile butadiene styrene composite specimens fabricated by overheat fused filament fabrication printing10.1016/j.compositesb.2022.109783 ↗
14. Simpson · 2018
15. Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing10.1016/j.compositesb.2020.108175 ↗
16. Effects of carbon fibre reinforcement on the geometric properties of PETG-based filament using FFF additive manufacturing10.1016/j.compositesb.2022.109766 ↗
17. Developments in construction- scale additive manufacturing processes10.1016/j.autcon.2011.06.010 ↗
18. Review of emerging additive manufacturing technologies in 3D printing of cementitious materials in the construction industry10.3389/fbuil.2018.00085 ↗
19. 3D printing for polymer/particle-based processing: a review10.1016/j.compositesb.2021.109102 ↗
20. Material and energy loss due to human and machine error in commercial FDM printers10.1016/j.jclepro.2017.01.171 ↗
21. Additive manufacturing for enhanced performance of molds10.1016/j.procir.2016.05.074 ↗
22. Composite material recycling technology—state-of-the-art and sustainable development for the 2020s10.3390/jcs5010028 ↗
23. Plastic waste management: a review of existing life cycle assessment studies10.3390/su13105340 ↗
24. Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach10.1016/j.wasman.2020.12.020 ↗
25. Plastic recycling in additive manufacturing: a systematic literature review and opportunities for the circular economy10.1016/j.jclepro.2020.121602 ↗
26. In technical evaluation of mechanical recycling of PLA 3D printing wastes
27. Recycling and valorization of glass fibre thermoset composite waste by cold incorporation into a sustainable inorganic polymer matrix10.1016/j.compositesb.2021.109120 ↗
28. A review on pyrolysis of plastic wastes10.1016/j.enconman.2016.02.037 ↗
29. Coughlin · 2021 · 1
30. The pyrolysis of end-of-life wind turbine blades under different atmospheres and their effects on the recovered glass fibers10.1016/j.compositesb.2022.110493 ↗
31. Experimental feasibility and environmental impacts of compression molded discontinuous carbon fiber composites with opportunities for circular economy10.1016/j.compositesb.2022.109638 ↗
32. Substitution of virgin carbon fiber with low-cost recycled fiber in automotive grade injection molding polyamide 66 for equivalent composite mechanical performance with improved sustainability10.1016/j.compositesb.2021.109007 ↗
33. Chemical recycling to monomer for an ideal, circular polymer economy10.1038/s41578-020-0190-4 ↗
34. Chemical recycling of waste plastics for new materials production10.1038/s41570-017-0046 ↗
35. Recycling glass fibers from thermoset epoxy composites by in situ oxonium-type polyionic liquid formation and naphthalene-containing superplasticizer synthesis with the degradation solution of the epoxy resin10.1016/j.compositesb.2022.110435 ↗
36. Recent insight into enzymatic degradation of plastics prevalent in the environment: a mini - review
37. Microbial and enzymatic degradation of synthetic plastics
38. Enzymatic degradation of plant biomass and synthetic polymers10.1038/s41570-020-0163-6 ↗
39. Mechanical recycling of packaging plastics: a review10.1002/marc.202000415 ↗
40. Knauer · 2019
41. An engineered PET depolymerase to break down and recycle plastic bottles10.1038/s41586-020-2149-4 ↗
42. Korey · 2021
43. Extrusion 3D printing of polybutyrate-adipate-terephthalate-polymer composites in the pellet form10.3390/polym10080922 ↗
44. Biopolymer alternatives in pellet form for 3D printing by extrusion10.1089/3dp.2018.0152 ↗
45. Screw-assisted 3D printing with granulated materials: a systematic review
46. Design and development of an extrusion system for 3D printing biopolymer pellets10.1007/s00170-018-1843-y ↗
47. Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: a review and future perspectives10.3390/ma11050840 ↗
48. Mechanical recycling of an end-of-life automotive composite component
49. Mechanical performance and modelling of a fully recycled modified CF/PP composite10.1177/0021998311423860 ↗
50. The economic and mechanical potential of closed loop material usage and recycling of fibre-reinforced composite materials10.1016/j.jclepro.2019.03.156 ↗
51. An evaluation of life cycle assessment and its application to the closed-loop recycling of carbon fibre reinforced polymers10.1016/j.compositesb.2019.107665 ↗
52. The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers10.1002/app.42275 ↗
53. Shredding and sieving thermoplastic composite scrap: method development and analyses of the fibre length distributions10.1016/j.compositesb.2019.107197 ↗
54. Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes
55. A review on recycling of carbon fibres: methods to reinforce and expected fibre composite degradations10.3390/ma15144991 ↗
56. High-performance molded composites using additively manufactured preforms with controlled fiber and pore morphology
57. Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing
58. Materials · 2014
59. Environmental and financial performance of mechanical recycling of carbon fibre reinforced polymers and comparison with conventional disposal routes10.1016/j.jclepro.2016.03.139 ↗
60. Sheet moulding compound (SMC) from carbon fibre recyclate10.1016/j.compositesa.2010.05.005 ↗
61. Highly oriented carbon fiber–polymer composites via additive manufacturing10.1016/j.compscitech.2014.10.009 ↗
62. An investigation into 3D printing of fibre reinforced thermoplastic composites
63. Multiple closed loop recycling of carbon fibre composites with the HiPerDiF (High Performance Discontinuous Fibre) method10.1016/j.compstruct.2016.06.018 ↗
64. Additively manufactured carbon fiber-reinforced composites: state of the art and perspective
65. Studies on degradation of PET in mechanical recycling10.1002/masy.19991440142 ↗
66. Methods of recycling, properties and applications of recycled thermoplastic polymers10.3390/recycling2040024 ↗
67. Plastics recycling: challenges and opportunities10.1098/rstb.2008.0311 ↗
68. Francis · 2016
69. The thermal degradation of acrylonitrile-butadiene-styrene terpolymei as studied by TGA/FTIR10.1016/0141-3910(94)00122-O ↗
70. Porosity determination with helium pycnometry as a method to characterize waterlogged woods and the efficacy of the conservation treatments10.1111/j.1475-4754.2011.00657.x ↗
71. Investigating the effects of fiber surface treatment and alignment on mechanical properties of recycled carbon fiber composites10.1016/j.compositesa.2019.01.012 ↗
72. Effect of fiber sizing on Mechanical properties of carbon reinforced composites: a Review10.30564/opmr.v1i2.1683 ↗