journal article·2025-06

A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes

Furkan Erhan, Lokman Gemi, Şakir Yazman, Sezer Morkavuk, Uğur Köklü

Publisher page

Abstract

In composite materials, stacking of layers at different angles and changes in stacking sequence significantly affect not only the mechanical behavior but also the machinability characteristic of the composite structure. Therefore, the variation in stacking sequence represents a recent and important research topic in fiber-reinforced plastics. The objective of this study was to investigate the mechanical properties and drilling machinability characteristics of BFRP composite pipes in three different stackings: [±30/±60/±90]3, [±60/±90/±30]3 and [±90/±30/±60]3. The experimental results demonstrate that the stacking sequence has a significant effect on the mechanical behavior and drilling-induced damage formation. It is determined that the [±90/±30/±60]3 sample provided the highest performance in terms of mechanical properties but increased the thrust force during drilling. Furthermore, it is observed that the positioning of the ±90 layer has a considerable impact on both the mechanical and machinability outputs. © 2025 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials10.1016/j.dt.2018.02.001 ↗
2. Analysis and modelling of thrust force in drilling of basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites10.1007/s40430-023-04241-7 ↗
3. Experimental investigation of screwed joints capabilities for the CFRP composite laminates10.1016/j.compositesb.2019.107142 ↗
4. Multi-scale mechanical behavior of liquid Elium® based thermoplastic matrix composites reinforced with different fiber types: insights from fiber–matrix adhesion interactions10.1007/s12221-024-00781-4 ↗
5. Impact characteristics of S2-glass fibre/FM94-epoxy composites under high and cryogenic temperatures: experimental and numerical investigation10.1016/j.compositesb.2024.111786 ↗
6. Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact10.1016/j.compstruct.2022.115395 ↗
7. Developments and industrial applications of basalt fibre reinforced composite materials10.3390/jcs6120367 ↗
8. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
9. A short review on basalt fiber reinforced polymer composites10.1016/j.compositesb.2014.12.011 ↗
10. Mechanical properties of a unidirectional basalt-fiber/epoxy composite10.3390/jcs4030101 ↗
11. An experimental assessment of hybrid bolted/bonded basalt fiber reinforced polymer composite joints' temperature-dependent mechanical performances by static and dynamic mechanical analyses10.1016/j.ijadhadh.2022.103120 ↗
12. Studies on glass/epoxy and basalt/epoxy thin-walled pressure vessels subjected to internal pressure using ultrasonic ‘C’ scan technique10.1016/j.tws.2022.110160 ↗
13. Surface treatment of Basalt fiber for use in automotive composites
14. Experimental and statistical damage analysis in milling of S2-glass fiber/epoxy and basalt fiber/epoxy composites10.1002/pc.28826 ↗
15. Experimental investigation of graphene nanoplatelets effect on the fatigue behavior of basalt/epoxy composite pressure vessels10.1016/j.tws.2021.108672 ↗
16. Mechanical properties of pultruded basalt fiber-reinforced polymer tube under axial tension and compression10.1016/j.conbuildmat.2018.05.036 ↗
17. Hydrothermal aging effect on crushing characteristics of intraply hybrid composite pipes10.1016/j.engstruct.2023.117011 ↗
18. An experimental study on intraply fiber hybridization of filament wound composite pipes subjected to quasi-static compression loading10.1016/j.polymertesting.2019.106082 ↗
19. Crashworthiness characteristics of hydrothermally aged intraply glass/basalt composite pipes10.1016/j.marstruc.2024.103656 ↗
20. Experimental investigation on multi-layered filament wound basalt/E-glass hybrid fiber composite tubes10.1088/2053-1591/ac608d ↗
21. Experimental investigation of axial compression behavior after low velocity impact of glass fiber reinforced filament wound pipes with different diameter10.1016/j.compstruct.2021.114929 ↗
22. Fatigue behavior of graphene nanoplatelets reinforced and unreinforced basalt/epoxy composite pressure vessels subjected to low-velocity impact under internal pressure10.1177/00219983211037058 ↗
23. Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure10.1016/j.compscitech.2004.10.002 ↗
24. Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure10.1016/j.matdes.2009.04.025 ↗
25. Experimental investigation of fatigue damage formation of hybrid pipes subjected to impact loading under internal pre-stress10.1016/j.compositesb.2017.03.051 ↗
26. Fatigue crack growth behavior of filament wound composite pipes in corrosive environment10.1177/0731684408094068 ↗
27. Experimental study of low velocity impact response of carbon/basalt hybrid filament wound composite pipes10.1142/S021945541850089X ↗
28. Transverse impact response of filament wound basalt composite tubes10.1016/j.compositesb.2017.01.005 ↗
29. Experimental study on the effect of graphene nanoplatelets on the low-velocity impact response of prestressed filament wound basalt-based composite pressure vessels10.1002/pc.26243 ↗
30. Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study10.1016/j.compositesb.2018.07.056 ↗
31. Impact response of filament-wound structure with polymeric liner: experimental and numerical investigation (Part-A)10.1016/j.rineng.2023.101730 ↗
32. A progressive damage model for pressurized filament-wound hybrid composite pipe under low-velocity impact10.1016/j.compstruct.2021.114520 ↗
33. Finite element analysis of impact-induced damage in pressurized hybrid composites pipes
34. Experimental investigation of the effect of diameter upon low velocity impact response of glass fiber reinforced composite pipes10.1016/j.compstruct.2021.114428 ↗
35. Mechanical characterization of basalt and glass fiber epoxy composite tube10.1590/1980-5373-mr-2017-0324 ↗
36. The influence of fiber orientation angle on hoop tensile characteristics of basalt fiber reinforced composite pipes
37. Investigation of mechanical properties and damage development of filament wound GFRP composite pipes by ring tensile test
38. Influence of winding angles on hoop stress in composite pressure vessels: finite element analysis10.1016/j.rineng.2023.101667 ↗
39. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review10.1016/j.compositesa.2019.105552 ↗
40. A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites10.1016/j.compositesb.2023.110589 ↗
41. Delamination formation, evaluation and suppression during drilling of composite laminates: a review10.1016/j.compstruct.2019.02.099 ↗
42. An experimental investigation on the influence of different surface curvatures in drilling machinability of carbon fiber reinforced plastic10.1177/09544062221110466 ↗
43. An experimental comprehensive analysis of drilling carbon fiber reinforced plastic tubes and comparison with carbon fiber reinforced plastic plate10.1177/07316844221122041 ↗
44. Dynamic behavior of screwed joints for CFRP composite laminate structures under impact loading10.1016/j.jmapro.2022.01.016 ↗
45. Evaluation of drilling by induced delamination of hybrid biocomposites reinforced with natural fibers: a statistical analysis by RSM10.1177/00219983241271035 ↗
46. The effects of support plate thickness on the drilling machinability of CFRP10.1177/07316844231218942 ↗
47. A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions10.1016/j.compstruct.2022.115913 ↗
48. Carbon fiber reinforced polymer in drilling: from damage mechanisms to suppression10.1016/j.compstruct.2022.115232 ↗
49. The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes10.1016/j.compositesa.2024.108005 ↗
50. Quasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: effect of recycled polystyrene nanofiber interleaving10.1016/j.compstruct.2023.117445 ↗
51. Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: drilling tests and damage analysis10.1016/j.compositesa.2024.108486 ↗
52. Study on the machinability of SMC composites during hole milling: influence of tool geometry and machining parameters10.1007/s13369-019-03865-z ↗
53. Evaluation of boron nitride nanoparticles on delamination in drilling carbon fiber epoxy nanocomposite materials10.1177/0021998319860245 ↗
54. A novelty optimization approach for drilling of CFRP nanocomposite laminates10.1007/s00170-018-2873-1 ↗
55. Delamination reduction in drilling composite materials by active backup force10.1016/j.cirp.2012.03.036 ↗
56. Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material10.1007/s00170-015-7284-y ↗
57. A new method to reduce delaminations during drilling of FRP laminates by feed rate control10.1016/j.compstruct.2017.12.005 ↗
58. The effects of back-up on drilling machinability of filament wound GFRP composite pipes: mechanical characterization and drilling tests10.1016/j.jmapro.2021.06.054 ↗
59. The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests10.1016/j.compositesb.2020.107787 ↗
60. An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation10.1016/j.compositesb.2019.05.023 ↗
61. The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality10.1016/j.compstruct.2019.111737 ↗
62. Reducing drilling-induced delamination in composite tube by magnetic colloid back-up10.1016/j.cirp.2014.03.070 ↗
63. Research on reducing drilling damage of CFRP pipe based on plastic pipe auxiliary support10.1007/s40684-024-00605-z ↗
64. Determination of the optimal feed rate for step drill bit drilling CFRP pipe based on exit damage analysis10.1016/j.jmapro.2022.09.002 ↗
65. Drilling of filament wound hybrid composite tubes: an experimental study10.1016/j.compstruct.2023.116686 ↗
66. Damage mechanism of carbon fiber reinforced plastic pipe based on reverse and forward curvature drilling
67. FRP rupture strains in the split-disk test10.1016/j.compositesb.2010.12.015 ↗
68. An extended Greszczuk’s analytical method for stress analysis of unsymmetrical laminated composite plates with a circular hole under axial, biaxial, and shear loads10.1016/j.istruc.2024.108169 ↗
69. Hole quality assessment in drilling process of basalt/epoxy composite laminate subjected to the magnetic field10.1051/meca/2019063 ↗
70. Delamination assessment in drilling basalt/carbon fiber reinforced epoxy composite material10.1016/j.jmrt.2020.05.001 ↗
71. Analysis of drilling-induced geometrical damages in basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites10.1007/s00170-022-10173-8 ↗
72. Investigations on drilling of hybrid basalt/glass polyester composites10.1080/14484846.2020.1784560 ↗
73. Assessment of thrust force, delamination and temperature during drilling of basalt fiber-reinforced composite with different drill geometries10.1088/2053-1591/ad2807 ↗
74. Enhancing drilling performance in hybrid basalt/E-glass fiber epoxy modified with MWCNTs + SiO2 nanocomposites10.1007/s00170-024-14049-x ↗
75. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates10.1016/S0890-6955(96)00095-8 ↗
76. Utilizing internal icing force to reduce delamination in drilling composite tubes10.1016/j.compstruct.2015.11.043 ↗
77. Parametric study on drilling of GFRP composite pipe produced by filament winding process in different backup condition10.1016/j.compstruct.2019.111661 ↗