journal article·2020-10

Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites

Zhaohan Jiang, Fanmengjing Wang, Jialiang Yin, Shen Gong, Zixiang Dai, Yongjie Pang, Yin Xiong, Zhenghong Zhu, Zhou Li

Publisher page

Abstract

Abstract A novel CuAlMn/polymer/carbon nanomaterials multi-scale composite with damping capability was successfully prepared. These composite materials composed of a CuAlMn memory alloy foam skeleton and a polymer matrix, which was in turn reinforced with different carbon nanomaterials. Experiment results show that the loss factor of CuAlMn/polymer/CNT composite is above 0.1, while the loss factor of CuAlMn/polymer/(Au@CNT + CNF + GNS) composite is higher than 0.12 over the entire temperature range, with the highest value reaching about 0.15. Also, it can be seen that the storage modulus of CuAlMn/polymer composite is above 3500 MPa, while CuAlMn/polymer/(Au@CNT + CNF + GNS) composite is about 1000 MPa. The loss factor for CuAlMn/polymer/(Au@CNT + CNF + GNS) composite is highest, and the storage modulus of it is lowest. A three-phase model was introduced to analyze the damping mechanism of the composite. The results indicate that the damping performance of the prepared composites is mainly affected by interfacial loss, which can be effectively improved by increasing the mismatch of elastic modulus near the interface and/or increasing the interfacial area. On these bases, the optimal performance of the composite material was predicted by calculation and simulation. This multi-scale composite offers a tremendously promising future, which needs further thorough exploration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Dielectric materials and actuators · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. A study on the effect of low-cost eggshell reinforcement on the immersion, damping and mechanical properties of magnesium-zinc alloy10.1016/j.compositesb.2019.107650 ↗
2. CNT-volume-fraction-dependent aggregation and waviness considerations in viscoelasticity-induced damping characterization of percolated-CNT reinforced nanocomposites10.1016/j.compositesb.2019.05.071 ↗
3. Dynamic response of Carbon-Nanotube-Reinforced-Polymer materials based on multiscale finite element analysis10.1016/j.compositesb.2019.02.039 ↗
4. Materials for vibration damping10.1023/A:1012999616049 ↗
5. High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material10.1016/j.compositesb.2019.03.029 ↗
6. Large amplitude vibration of fractionally damped viscoelastic CNTs/fiber/polymer multiscale composite beams10.1016/j.compstruct.2015.06.038 ↗
7. Influence of seawater absorption on the vibration damping characteristics and fracture behaviors of basalt/CNT/epoxy multiscale composites10.1016/j.compositesb.2014.03.010 ↗
8. Fabrication and experimental evaluation of vibration and damping in multiscale graphene/fiberglass/epoxy composites10.1177/0021998318822708 ↗
9. Processing, manufacturing, and characterization of vibration damping in epoxy composites modified with graphene nanoplatelets10.1002/pc.25251 ↗
10. Influence of composition and heat treatment on damping and magnetostrictive properties of Fe–18%(Ga+ Al) alloys10.1016/j.actamat.2014.05.044 ↗
11. Ultrahigh superelastic damping at the nano-scale: a robust phenomenon to improve smart MEMS devices10.1016/j.actamat.2018.12.043 ↗
12. Crystallographic orientation and stress-amplitude dependence of damping in the martensite phase in textured Ti–Nb–Al shape memory alloy10.1016/j.actamat.2009.12.040 ↗
13. Investigation of the martensitic transformation and the damping behavior of a superelastic Ti–Ta–Nb alloy10.1016/j.actamat.2012.09.065 ↗
14. Frequency-dependent mechanical damping in alloys10.1103/PhysRevB.95.214112 ↗
15. Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites: considered in terms of the particle packing model10.1016/j.actamat.2006.03.026 ↗
16. Preparation and damping properties of medium-temperature co-cured phenolic resin matrix composite structures10.1016/j.compstruct.2019.03.034 ↗
17. Research and applications of viscoelastic vibration damping materials: a review10.1016/j.compstruct.2015.10.014 ↗
18. Fabrication and damping behaviors of novel polyurethane/TiNiCu composites
19. Improving damping property of carbon-fiber reinforced epoxy composite through novel hybrid epoxy-polyurea interfacial reaction10.1016/j.compositesb.2019.01.064 ↗
20. Damping characteristics of Al matrix composite foams reinforced by in-situ grown carbon nanotubes10.1016/j.matlet.2017.07.126 ↗
21. Damping in composite materials: properties and models10.1016/j.compositesb.2015.03.081 ↗
22. Investigation of the time elapsed effect on residual stress measurement in a composite plate by DIC method10.1016/j.optlaseng.2020.106002 ↗
23. Nonlinear high-order dynamic stability of AL-foam flexible cored sandwich beam with variable mechanical properties and carbon nanotubes-reinforced composite face sheets in thermal environment10.1177/1099636217738908 ↗
24. Nonlinear analysis of viscoelastic micro-composite beam with geometrical imperfection using FEM: MSGT electro-magneto-elastic bending, buckling and vibration solutions
25. Active control of micro Reddy beam integrated with functionally graded nanocomposite sensor and actuator based on linear quadratic regulator method10.1016/j.euromechsol.2018.12.008 ↗
26. Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanical properties of nanocomposite
27. Nonlinear static and vibration analysis of Euler-Bernoulli composite beam model reinforced by FG-SWCNT with initial geometrical imperfection using FEM10.12989/sem.2016.59.3.431 ↗
28. Damping of thermoset and thermoplastic flax fibre composites10.1016/j.compositesa.2014.04.016 ↗
29. Damping and sound absorption properties of particle reinforced Al matrix composite foams10.1016/S0266-3538(02)00215-4 ↗
30. New type of piezo-damping epoxy-matrix composites with multi-walled carbon nanotubes and lead zirconate titanate10.1016/j.matlet.2008.05.003 ↗
31. Mechanical damping in porous Ti3SiC210.1016/j.actamat.2006.06.052 ↗
32. Vapor phase dealloying: a versatile approach for fabricating 3D porous materials10.1016/j.actamat.2018.10.012 ↗
33. Near-ideal compressive strength of nanoporous silver composed of nanowires10.1016/j.actamat.2019.05.011 ↗
34. Microstructure evolution and superelasticity of layer-like NiTiNb porous metal prepared by eutectic reaction10.1016/j.actamat.2017.10.021 ↗
35. Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution10.1016/j.actamat.2019.10.030 ↗
36. Self-assembled porous metal-intermetallic nanocomposites via liquid metal dealloying10.1016/j.actamat.2018.10.057 ↗
37. Permeability of porous ceramics by X-ray CT image analysis10.1016/j.actamat.2019.04.053 ↗
38. A novel approach to composite preparation by direct synthesis of carbon nanomaterial on matrix or filler particles10.1016/j.actamat.2012.12.007 ↗
39. The formation of highly ordered graphitic interphase around embedded CNTs controls the mechanics of ultra-strong carbonized nanofibers10.1016/j.actamat.2018.09.047 ↗
40. Micromechanical modeling of material damping in discontinuous fiber three-phase polymer composites10.1016/0961-9526(91)90025-N ↗
41. Fabrication, microstructure and property of cellular CuAlMn shape memory alloys produced by sintering–evaporation process10.1016/j.jallcom.2010.11.157 ↗
42. Damping and mechanical properties of polyol cross-linked polyurethane/epoxy interpenetrating polymer networks10.1177/0954008313508421 ↗
43. Freeze-drying synthesis of three-dimensional porous LiFePO4 modified with well-dispersed nitrogen-doped carbon nanotubes for high-performance lithium-ion batteries10.1016/j.apsusc.2016.12.220 ↗
44. Preparation of continuous carbon nanotube networks in carbon fiber/epoxy composite10.1016/j.compositesa.2013.10.016 ↗
45. Damping behavior during martensitic transformation in shape memory alloys10.1016/S0925-8388(03)00277-9 ↗
46. Effect of chain length of polyisobutylene oligomers on the molecular motion modes of butyl rubber: damping property10.1016/j.polymer.2018.03.009 ↗
47. Kim · 1998
48. Interfacial slip and damping in fibre reinforced composites10.1007/BF00808058 ↗
49. The concept of boundary interphase in composite mechanics10.1007/BF01784402 ↗
50. The effect of the boundary interphase on the thermomechanical behaviour of composites reinforced with short fibres10.1016/0015-0568(79)90016-2 ↗
51. Composite interphase characterization
52. Surface, interphase and composite property relations in fibre-reinforced polymers10.1016/0010-4361(94)90209-7 ↗
53. Kinetic and thermodynamic considerations regarding interphase formation in thermosetting composite systems10.1080/00218469408026615 ↗
54. Effect of an interphase region on debonding of a CNT reinforced polymer composite10.1016/j.compscitech.2010.09.002 ↗
55. Molecular dynamics simulations of vinyl ester resin monomer interactions with a pristine vapor-grown carbon nanofiber and their implications for composite interphase formation10.1016/j.carbon.2011.03.047 ↗
56. The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy10.1016/j.actamat.2018.10.005 ↗
57. Study of the TiC1-x–TiO2 reactive interface10.1016/j.actamat.2017.12.055 ↗
58. Tzeng · 1989
59. The elasticity and strength of paper and other fibrous materials10.1088/0508-3443/3/3/302 ↗
60. Loss factors of viscoelastic systems in terms of energy concepts10.1121/1.1918227 ↗
61. An extended Mori-Tanaka model for the elastic moduli of porous materials of finite size10.1016/j.actamat.2011.07.041 ↗
62. A parametric study of material damping in fibre-reinforced plastics10.1016/0010-4361(95)90415-V ↗
63. Effect of interphase properties on the damping response of polymer nano-composites10.1016/j.mechrescom.2007.08.005 ↗
64. Damping behavior of porous CuAlMn shape memory alloy10.1016/j.matlet.2006.10.007 ↗
65. Atomistic simulations of vibration and damping in three-dimensional graphene honeycomb nanomechanical resonators10.1016/j.spmi.2020.106420 ↗
66. A tunable carbon nanotube electromechanical oscillator10.1038/nature02905 ↗
67. Qian · 2011 · 259
68. Vibration-based identification of interphase properties in long fiber reinforced composites10.1016/j.compstruct.2017.04.018 ↗
69. Effect of fibre shape and interphase on the anisotropic viscoelastic response of fibre composites10.1016/j.compstruct.2016.11.046 ↗
70. Simulation of Young's modulus of single-walled carbon nanotubes by molecular dynamics10.1016/j.physb.2004.07.005 ↗
71. Effective elastic mechanical properties of single layer graphene sheets10.1088/0957-4484/20/6/065709 ↗
72. Research on the mechanical damping properties of metallic foams
73. Strain relaxation in low-mismatched GaAs/GaAs1-xSbx/GaAs heterostructures10.1016/j.actamat.2018.09.042 ↗
74. Strong metal–metal interaction and bonding nature in metal/oxide interfaces with large mismatches10.1016/j.actamat.2019.08.018 ↗
75. Prediction of fiber-matrix interphase effects on damping of composites using a micromechanical strain energy/finite element approach10.1016/0961-9526(93)90005-5 ↗
76. Damping characteristics of composite materials and structures10.1007/BF02650027 ↗