Mechanical behavior and failure of composite pyramidal truss core sandwich columns
Source abstract
Abstract
A series of analytical and experimental investigations is presented to study the response and failure of pyramidal truss core sandwich panels made of carbon fiber composite under axial compression. In the analytical part of the study, three failure modes: (i) Euler or core shear macro-buckling, (ii) face wrinkling, and (iii) face sheet crushing, were considered and theoretical relationships for predicting the failure load associated with each mode were presented. In the experimental part of the study, three different sets of specimens were manufactured to probe the three failure modes mentioned above. Pyramidal truss cores were fabricated using a hot-press molding technique and were bonded to composite face sheets made of fiber reinforced composite. The response of the sandwich panels under axial compression was measured up to failure. The measured peak loads obtained in the experiments showed good agreement with the analytical predictions. The experiments also provide insight into the post-failure response of the sandwich panels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Gibson · 1997
2. Ashby · 2000
3. Measurement and analysis of the structural performance of cellular metal sandwich construction10.1016/S0020-7403(00)00070-9 ↗
4. Mechanical properties of an extruded pyramidal lattice truss sandwich structure10.1016/j.scriptamat.2007.08.041 ↗
5. Lattice truss structures from expanded metal sheet10.1016/j.matdes.2005.08.013 ↗
6. Pyramidal lattice truss structures with hollow trusses10.1016/j.msea.2005.02.048 ↗
7. Experimental assessment of the ballistic response of composite pyramidal lattice truss structures10.1016/j.compositesb.2007.02.029 ↗
8. Compression strength of tube-woven Kagome truss cores
9. A parametric study on compressive characteristics of wire-woven bulk Kagome truss cores10.1016/j.compstruct.2009.08.029 ↗
10. Effective properties of the octet-truss lattice material10.1016/S0022-5096(01)00010-2 ↗
11. Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-cor truss sandwich10.1016/S0263-8223(02)00083-1 ↗
12. The compressive response of carbon fiber composite pyramidal truss sandwich cores10.3139/146.101594 ↗
13. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
14. Quasistatic deformation and failure modes of composite square honeycombs10.2140/jomms.2008.3.1315 ↗
15. Sandwich panels with Kagome lattice cores reinforced by carbon fibers10.1016/j.compstruct.2006.09.011 ↗
16. Fabrication and testing of carbon fiber reinforced truss core sandwich panels
17. Manufacturing and mechanical behavior of the sandwich structure with carbon fiber-reinforced pyramidal lattice truss cores10.1016/j.matdes.2009.11.061 ↗
18. Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures10.1016/j.compstruct.2010.03.010 ↗
19. Sandwich structures with textile-reinforced composite foldcores under impact loads10.1016/j.compstruct.2009.11.001 ↗
20. Manufacturing and testing of a CFRC sandwich cylinder with Kagome cores10.1016/j.compscitech.2009.08.012 ↗
21. Structural response of pyramidal core sandwich columns10.1016/j.ijsolstr.2006.10.004 ↗
22. End compression of sandwich columns10.1016/S1359-835X(01)00118-X ↗
23. Experimental investigation of compression failure of sandwich specimens with face/core debond10.1016/j.compositesb.2003.10.004 ↗
24. Allen · 1969
25. Jones · 1975
26. Collapse of truss core sandwich beams in 3-point bending10.1016/S0020-7683(01)00103-2 ↗
27. Herringbone buckling patterns of compressed thin films on compliant substrates10.1115/1.1756141 ↗
28. Soft matter with hard skin: from skin wrinkles to templating and material characterization10.1039/b516741h ↗
29. Compressive failure of fiber composites10.1016/S0065-2156(08)70385-5 ↗
30. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
31. Progressive fatigue damage modeling of composite materials, part I: modeling10.1177/002199830003401301 ↗
32. Review of degradation models for progressive failure analysis of fiber reinforced polymer composites10.1115/1.3013822 ↗
33. ASTM: C365/C 364M-06 standard test method for end compressive properties of sandwich cores. West Conshohocken (PA): ASTM Int; 2006.