Effect of hybrid carbon nanotube/short glass fiber reinforcement on the properties of polypropylene composites
Source abstract
Abstract
Abstract The hybrid reinforcement effect of surface treated or untreated carbon nanotube (CNT)/glass fiber (GF); on the morphology, mechanical and electrical properties of polypropylene matrix composites were investigated. Surface treatment of the CNTs was performed by using 3-Amino propyl tri ethoxy silane (APTES). Composites were prepared by means of extrusion and injection molding techniques. FT-IR analysis of the CNT samples revealed the successful surface modification of nanotubes after silane treatment. XRD results showed that chemically functionalized carbon nanotubes have the same cylinder wall and crystalline structure with untreated carbon nanotubes. Tensile and dynamic mechanical analysis (DMA) test results revealed that GF and nanotube reinforced hybrid composites exhibited better tensile strength and modulus values than only GF or CNT reinforced composites. According to all these results, it can be concluded that simultaneous usage of glass fiber and carbon nanotube in the composites increases the reinforcing ability of nanotubes in polymer composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Carbon Nanotubes in Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Impact behaviour of polypropylene filled with multi-walled carbon nanotubes10.1016/j.eurpolymj.2007.05.010 ↗
2. Effects of initial fiber length and fiber length distribution on the properties of carbon-fiber-reinforced-polypropylene composites10.1177/0731684412452678 ↗
3. Investigation of deformation mechanism in polypropylene/glass fiber composite10.1002/app.11609 ↗
4. Development of short-carbon-fiber-reinforced polypropylene composite for car bonnet10.1080/03602550801897323 ↗
5. Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic properties10.1016/j.compscitech.2008.05.023 ↗
6. Poly(ethylene terephthalate)/carbon nanotube composites prepared with chemically treated carbon nanotubes10.1002/pen.21938 ↗
7. Properties of surface-modified multiwalled carbon nanotube filled poly(ethylene terephthalate) composite films10.1002/app.27153 ↗
8. Characterization of E-glass–polypropylene interfaces using carbon nanotubes as strain sensors10.1016/j.compscitech.2004.02.004 ↗
9. Silica nanoparticles as coupling agents for polypropylene/glass composites10.1016/j.compscitech.2012.12.016 ↗
10. An efficient way to improve the mechanical properties of polypropylene/short glass fiber composites10.1002/app.21575 ↗
11. Glass fiber reinforced polypropylene mechanical properties enhancement by adhesion improvement10.3390/ma5061084 ↗
12. Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites10.1016/j.compscitech.2008.02.003 ↗
13. Carbon nanotubes-polypropylene nanocomposites for electrostatic discharge applications10.1021/ma901612w ↗
14. Preparation and properties of functionalized multiwalled carbon nanotubes/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.06.064 ↗
15. Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites10.1016/j.matdes.2012.06.025 ↗
16. Surface modification of multi-walled carbon nanotubes using 3-Amino propyl tri ethoxy silane10.1007/s10853-007-2209-2 ↗
17. Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites10.1016/j.compscitech.2006.10.021 ↗
18. Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites10.1016/j.carbon.2009.02.029 ↗
19. Functionalized effect on carbon nanotube/epoxy nano-composites10.1016/j.msea.2006.07.106 ↗
20. Effect of -COOH functionalized carbon nanotubes on mechanical, dynamic mechanical and thermal properties of polypropylene nanocomposites10.1177/0892705711406159 ↗
21. Microstructure and properties of polpropylene/carbon nanotube nanocomposites10.3390/ma3042884 ↗
22. Effect of carbon nanotube purification on the electrical and mechanical properties of poly(ethylene terephthalate) composites with carbon nanotubes in low concentration10.1002/app.32981 ↗
23. Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties10.1016/j.compscitech.2008.02.020 ↗
24. Effective reinforcement in carbon nanotube- polymer composites10.1098/rsta.2007.2175 ↗
25. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites10.1016/j.compositesb.2008.01.002 ↗
26. High performance PEEK/carbon nanotube composites compatibilized with polysulfones-II. Mechanical and electrical properties10.1016/j.carbon.2010.05.050 ↗
27. Synthesis of organosilane-modified carbon nanofibers and influence of silane coating thickness on the performance of polyethylene nanocomposites10.1002/mame.201000226 ↗
28. Gul · 1996