journal article·2017-01

Analytical model for the prediction of the piezoresistive behavior of CNT modified polymers

Francesco Panozzo, Michele Zappalorto, Marino Quaresimin

Publisher page

Abstract

Abstract In this work a theoretical and experimental study is carried out on the piezoresistive behavior of CNT modified polymers. A novel and easy-to-be applied analytical model is developed, to predict the piezoresistive response of CNT modified polymers, where the conductive network of CNTs within the polymeric matrix is modelled accounting for the three-dimensional random orientation of the nanofiller, the CNT waviness and entangling, and the electrical properties of the material in the undeformed state. Then, the analytical estimations are compared with the results from new experimental tests on specimens made of multi-walled CNT modified thermosetting matrix as well with data taken from the literature, showing a good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites10.1016/S0032-3861(03)00539-1 ↗
2. Health monitoring of cross-ply laminates: modelling the correlation between damage evolution and electrical resistance change10.1016/j.compositesa.2015.12.001 ↗
3. Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix10.1016/j.compscitech.2008.01.001 ↗
4. Damage mapping of GFRP via electrical resistance measurements using nanocomposite epoxy matrix systems10.1016/j.compositesb.2013.09.049 ↗
5. Carbon nanotube networks: sensing of distributed strain and damage for life prediction and self healing10.1002/adma.200600977 ↗
6. Exploiting carbon nanotube networks for damage assessment of fiber reinforced composites10.1016/j.compositesb.2015.02.022 ↗
7. Piezoresistive response of spray-printed carbon nanotube/poly(vinylidene fluoride) composites10.1016/j.compositesb.2016.03.098 ↗
8. Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube-based composites10.1063/1.2819690 ↗
9. Strain sensing in polymer/carbon nanotube composites by electrical resistance measurement10.1016/j.compositesb.2014.08.027 ↗
10. Poly(3-hexylthiophene) wrapped carbon nanotube/poly(dimethylsiloxane) composites for use in finger-sensing piezoresistive sensors10.1016/j.carbon.2010.08.048 ↗
11. Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites10.1016/j.compscitech.2015.04.016 ↗
12. Piezoresistive response of epoxy composites with carbon nanoparticles under tensile load10.1103/PhysRevB.80.245437 ↗
13. Carbon nanotube agglomeration effect on piezoresistivity of polymer nanocomposites10.1016/j.polymer.2014.08.054 ↗
14. On the mechanism of piezoresistivity of carbon nanotube polymer composites10.1016/j.polymer.2014.06.024 ↗
15. Investigation of a polymer/carbon nanotube composite strain sensor10.1016/j.carbon.2009.10.012 ↗
16. Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor10.1016/j.actamat.2008.02.030 ↗
17. Electrical resistance-based strain sensing in carbon nanotube/polymer composites under tension: analytical modeling and experiments10.1016/j.compscitech.2012.07.001 ↗
18. Tunneling through thin insulating layers10.1063/1.1735973 ↗
19. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites10.1016/j.polymer.2011.06.046 ↗
20. Generalized formula for the electric tunnel effect between similar electrodes separated by a thin insulating film10.1063/1.1702682 ↗
21. Resistivities of conductive composites10.1063/1.352350 ↗
22. Time dependence of piezoresistance for the conductor-filled polymer composites10.1002/1099-0488(20001101)38:21<2739::AID-POLB40>3.0.CO;2-O ↗
23. Formation of percolating networks in multi-wall carbon-nanotube-epoxy composites10.1016/j.compscitech.2004.01.025 ↗
24. Olver · 2010
25. Two percolation thresholds in carbon nanotube epoxy composites10.1016/j.compscitech.2006.02.037 ↗
26. Work function of carbon nanotubes10.1016/S0008-6223(00)00322-5 ↗
27. Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content10.1016/j.compscitech.2004.04.002 ↗