Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission
Source abstract
Abstract
Background The use of Acoustic Emission (AE) as a Structural Health Monitoring (SHM) technique is very attractive thanks to its ability to detect not only damage sources in real-time but also to locate them. Methods To demonstrate the AE capabilities on known damage modes, a carbon fibre panel was manufactured with cut fibres in a central location and subjected to fatigue loading to promote matrix cracking. Subsequently, a delamination was created within the panel using an impact load, and the test was continued. Results AE signals were located within the crack area in the first part of the test. After impact, AE signals were detected from both areas under fatigue loading; signals from this area were located and used for further analysis with the neural network technique. Conclusions The application of an unsupervised neural network based classification technique successfully separated two damage mechanisms, related to matrix cracking and delamination. The results obtained allowed a more detailed understanding of such sources of AE in carbon fibre laminates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. The fundamental axioms of structural health monitoring10.1098/rspa.2007.1834 ↗
2. Miller · 1987 · vol. 5 · 652
3. Acoustic emission testing
4. Using acoustic emission in fatigue and fracture materials research
5. Thirty years of advances and some remaining challenges in the application of acoustic emission to composite materials
6. Classification and identification of damage mechanisms in polyethylene self-reinforced laminates by acoustic emission technique10.1002/pc.21113 ↗
7. Dynamic crack propagation in fiber reinforced composites
8. Fatigue damage accumulation in pultruded glass/polyester rods10.1016/0010-4361(89)90915-4 ↗
9. Acoustic emission energy as a fatigue damage parameter for CFRP composites10.1016/j.ijfatigue.2006.05.009 ↗
10. On damage development in mechanically fastened composite laminates10.1016/S0263-8223(99)00130-0 ↗
11. Predicting residual strength of pre-fatigued glass fibre-reinforced plastic laminates through acoustic emission monitoring10.1016/j.compositesb.2005.02.001 ↗
12. Delta T source location for acoustic emission10.1016/j.ymssp.2006.05.003 ↗
13. Acoustic emission source location in composite materials using Delta T mapping10.1016/j.compositesa.2012.01.023 ↗
14. A mechanical AE simulator for system calibration and waveform analysis
15. Modal analysis of acoustic emission signals from artificial and fatigue crack sources in aerospace grade steel
16. Elastic waves from localized sources in composite laminates10.1016/S0020-7683(02)00360-8 ↗
17. Use of acoustic emission to identify damage modes in glass fibre reinforced polyester10.1016/S0266-3538(02)00087-8 ↗
18. Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission10.1016/j.compscitech.2005.07.013 ↗
19. Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event10.1016/j.compscitech.2004.01.008 ↗
20. Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites10.1016/0266-3538(95)00121-2 ↗
21. Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers10.1016/j.ndteint.2003.09.010 ↗
22. Acoustic emission characteristics of Mode I delamination in glass/polyester composites10.1177/0021998309349553 ↗
23. Monitoring acoustic emission during tensile loading of thermoplastic composites materials
24. Influence of hydrolytic ageing on the acoustic emission signatures of damage mechanisms occurring during tensile tests on a polyester composite: application of a Kohonen's map10.1016/j.compstruct.2004.10.018 ↗
25. Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques10.1016/S0963-8695(96)00060-6 ↗
26. Interpreting acoustic emission signals by artificial neural networks to predict the residual strength of pre-fatigued GFRP laminates10.1016/j.compscitech.2005.04.032 ↗
27. Health monitoring of FRP using acoustic emission and artificial neural networks10.1016/j.compstruc.2007.02.015 ↗
28. Acoustic emission characterization of failure modes in composites with ANN10.1016/S0263-8223(03)00068-0 ↗
29. An unsupervised pattern recognition approach for AE data originating from fatigue tests on polymer-composite materials
30. Pattern recognition approach to identify natural clusters of acoustic emission signals10.1016/j.patrec.2011.09.018 ↗
31. Development of an artificial neural network processing technique for the analysis of damage evolution in pultruded composites with acoustic emission10.1016/j.compositesb.2013.09.005 ↗