Tensile properties of carbon nanofiber reinforced multiscale syntactic foams
Source abstract
Abstract
The mechanical behavior of hollow glass microballoon–epoxy matrix syntactic foams reinforced with carbon nanofibers (CNFs) is studied in this work. Glass microballoons of two different wall thicknesses are used in two volume fractions to obtain four types of CNF reinforced syntactic foams. Tensile test results show that the presence of CNFs leads to increased values of strength and modulus in syntactic foams containing 50 vol.% microballoons compared to unreinforced syntactic foams. The specific tensile modulus of all CNF reinforced composites is found to be higher than that of the CNF reinforced epoxy resin used as the matrix. Fracture surfaces of CNF/epoxy and CNF reinforced syntactic foams show extensive deformation marks. Instrumented nanoindentation tests are conducted on CNF/epoxy specimens to further characterize the elastic properties of the reinforced resin matrix. A homogenization technique based on the so-called differential scheme that accounts for particle size and wall thickness polydispersivity along with entrapped matrix voids is used to interpret experimental results. The model predictions are in close agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effect of volume fraction and wall thickness on the elastic properties of hollow particle filled composites10.1016/j.compositesb.2008.09.002 ↗
2. Three-phase syntactic foams: structure-property relationships10.1007/s10853-006-7646-9 ↗
3. Comprehensive analyses of syntactic foam behaviour in deepwater environment10.1007/s10853-008-3166-0 ↗
4. Influence of moisture absorption on flexural properties of syntactic foams10.1016/j.compositesb.2011.06.016 ↗
5. Effect of fiber reinforcement on the tensile, fracture and thermal properties of syntactic foam10.1016/j.polymer.2007.03.069 ↗
6. Processing and compressive strengths of syntactic foams with and without fibrous reinforcements10.1002/app.1452 ↗
7. Elastic design of syntactic foamed sandwiches obtained by filling of three-dimensional sandwich-fabric panels10.1016/S0020-7683(00)00025-1 ↗
8. Effects of microballoons’ size and content in epoxy on compressive strength and modulus10.1007/s10853-006-0801-5 ↗
9. Tensile properties of glass microballoon–epoxy resin syntactic foams10.1002/app.23548 ↗
10. Correlation of processing methodology to the physical and mechanical properties of syntactic foams with and without fibers10.1016/S1044-5803(99)00039-X ↗
11. Short-fiber-reinforced epoxy foams10.1016/j.compositesa.2005.12.011 ↗
12. Enhancing specific strength and stiffness of phenolic microsphere syntactic foams through carbon fiber reinforcement10.1002/pc.20795 ↗
13. Investigation of bending modulus of fiber-reinforced syntactic foams for sandwich and structural applications10.1002/pat.828 ↗
14. Enhancement of energy absorption in syntactic foams by nanoclay incorporation for sandwich core applications10.1007/s10443-005-1130-6 ↗
15. Investigation of flexural strength properties of rubber and nanoclay reinforced hybrid syntactic foams10.1016/j.msea.2005.10.063 ↗
16. Enhancing tensile strength and toughness in syntactic foams through nanoclay reinforcement10.1016/j.msea.2006.11.121 ↗
17. Nano-toughening versus micro-toughening of polymer syntactic foams10.1016/j.compscitech.2007.05.019 ↗
18. Effect of carbon nanofibers on tensile and compressive characteristics of hollow particle filled composites10.1016/j.matdes.2009.09.007 ↗
19. Characterization of carbon nanotube/nanofiber-reinforced polymer composites using an instrumented indentation technique10.1016/j.compositesb.2006.04.002 ↗
20. Characterization of carbon nanofiber/epoxy nanocomposites by the nanoindentation technique10.1016/j.compositesb.2011.02.017 ↗
21. Dynamic mechanical and thermal analysis of aligned vapor grown carbon nanofiber reinforced polyethylene10.1016/j.compositesb.2006.04.003 ↗
22. Chen Y, Han D, Ouyang W, Chen S, Hou H, Zhao Y, et al. Fabrication and evaluation of polyamide 6 composites with electrospun polyimide nanofibers as skeletal framework. Composites: Part B; in press. doi:10.1016/j.compositesb.2011.11.071.10.1016/j.compositesb.2011.11.071 ↗
23. Processing and properties of poly(methyl methacrylate)/carbon nanofiber composites10.1016/j.compositesb.2003.08.009 ↗
24. Effect of polydispersivity and porosity on the elastic properties of hollow particle filled composites10.1016/j.mechmat.2010.05.002 ↗
25. Comparison of compressive properties of layered syntactic foams having gradient in microballoon volume fraction and wall thickness10.1016/j.msea.2006.04.078 ↗
26. Sacrificial bonds in stacked-cup carbon nanofibers: biomimetic toughening mechanisms for composite systems10.1021/nn100661a ↗
27. Microstructural changes induced in stacked cup carbon nanofibers by heat treatment10.1016/S0008-6223(03)00171-4 ↗
28. Experimental study of mechanical and electrical properties of carbon nanofiber/epoxy composites10.1016/j.matdes.2009.11.058 ↗
29. Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foams10.1016/j.compositesb.2009.07.004 ↗
30. Aqueous foam stabilized by hydrophobically modified silica particles and liquid paraffin droplets10.1016/j.colsurfa.2009.11.010 ↗
31. Hydrophilic porous polymers based on high internal phase emulsions solely stabilized by poly(urethane urea) nanoparticles10.1016/j.polymer.2010.06.008 ↗
32. Creep behaviour of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending10.1016/j.compositesb.2011.04.035 ↗
33. Localized elastic modulus distribution of nanoclay/epoxy composites by using nanoindentation10.1016/j.compstruct.2006.04.045 ↗
34. Study of particle-matrix interaction in Al/AlB2 composite via nanoindentation10.1016/j.matchar.2009.11.002 ↗
35. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile
36. Relationship between contact stiffness, contact depth, and mechanical properties for indentation in linear viscoelastic solids using axisymmetric indenters10.1002/stc.127 ↗
37. Spear · 1994
38. Elastic moduli of a composite of hollow spheres in a matrix10.1016/0022-5096(93)90063-L ↗
39. Analysis of flexural properties of hollow-particle filled composites10.1016/j.compositesb.2009.03.004 ↗